Accessories for Boat Gas Installation

Accessories for Boat Gas Installation

Accessories for Boat Gas Installation

Show:
Sort By:

Vetus GD1000 Gas & Carbon Monoxide Detector (12 & 24V)

Vetus GD1000 Gas & Carbon Monoxide Detector (12 & 24V) The Vetus GD1000 gas detector offers a gas detection system for a range of combustible gases, including propane, butane, methane and hydrogen. In addition it will also detect poisonous carbon monoxide. A single sensor is supplied as standard, which can detect both flammable gases (such as bottled gas) and carbon monoxide. A second sensor can be fitted (as an extra) for gas detection in an alternative location. The push button marked "Valve" will manually actuate a remote solenoid operated gas valve, if this is installed in the system. If this solenoid valve is in the open position (or not fitted), the presence of gas is detected continuously. If the valve is closed, detection will take place intermittently. Please note, the valve itself is not supplied with the gas detector. If the gas detector senses high concentrations of flammable gases and/or carbon mono..

(12)

938.25€ 877.26€ Ex Tax: 877.26€

Solenoid Valve GasBOAT Safety Isolation (10V - 32V / 1/2" BSP)

Solenoid Valve GasBOAT Safety Isolation (10V - 32V / 1/2" BSP) GasBOAT safety isolation valve designed to be installed on the low pressure side in the cylinder locker. This solenoid valve is normally closed and is electrically operated (10V - 32V DC). It features a brass body and is waterproof to make it suitable for use on board boats. It is also ISO 8846 / EN 28846 approved and CE marked. Specifications Brand GasBOAT Thread Gender Female Model 4112/4124 Thread Size 1/2" BSP Female ..

(9)

488.49€ 456.74€ Ex Tax: 456.74€

Vetus GSENSOR Sensor for Vetus GD1000 Gas & Carbon Monoxide Detector

Vetus GSENSOR Sensor for Vetus GD1000 Gas & Carbon Monoxide Detector The Vetus GSENSOR is an additional/replacement sensor for the Vetus GD1000 Gas and Carbon Monoxide Detector. Comes complete with 5 metre connection cable. Specifications Length Cable: 5 Metres Voltage 12V DC, 24V DC Brand Vetus ..

(11)

416.25€ 389.19€ Ex Tax: 389.19€

Gas Cylinder Adaptor Kit GasBOAT 4018

Gas Cylinder Adaptor Kit GasBOAT 4018 GasBOAT 4018 adaptor kit contains all the fittings you should need to connect to gas cylinders around the world. These fittings all connect to an M20 thread, making it perfect for use with the GasBOAT 4009 gas regulator, as well as connecting GasBOAT M20 gas hose. The adaptor kit is supplied in a convenient storage box and contains the following fittings: • 16mm x 1.5 to M20 Campingaz Cylinder Adaptor - For use with Campingaz and other cylinders found in Eastern Mediterranean - GasBOAT part number 4010. •5/8" Male POL (BSP) to M20 Cylinder Adaptor - For use with Propane cylinders of the type found in the UK - GasBOAT part number 4011. •21.8mm Left-hand Female Nut to M20 Cylinder Adaptor - For use with Butane and Propane cylinders of the type found in the UK, France, Holland, Belgium, Germany, Croatia and the Far East - GasBOAT part number 4012. •Male POL (NPT) to M20 Cyl..

(11)

407.25€ 380.78€ Ex Tax: 380.78€

Gas Alarm With Two Detector Heads Pilot Mini Mk2 (12V & 24V)

Gas Alarm With Two Detector Heads Pilot Mini Mk2 (12V & 24V) A Pilot twin channel gas alarm is an important and cost effective item of safety equipment wherever gas or other dangerous vapours may be present in the environment. However good a gas or engine installation may be there can be occasions when either a due to mechanical failure or human error, a potentially lethal leak may occur. Many of the vapours present on boats and in caravans such as butane, propane and petrol are heavier than air, meaning even a small leak can soon build up to dangerous proportions in the bilge of a boat or in an inadequately ventilated caravan. Pilot gas alarms are not fitted with an on / off switch as they are designed to be permanently on whenever the master switch is activated. The Pilot gas alarm also has a built in test feature to ensure the system works correctly. The Pilot twin channel gas alarm control box is supplied ..

(8)

349.65€ 326.92€ Ex Tax: 326.92€

GasBOAT 4408/SS Gas Regulator and Changeover Kit (2 x M20 Threads)

GasBOAT 4408/SS Gas Regulator and Changeover Kit (2 x M20 Threads) GasBOAT gas regulator and changeover system designed to provide steady and safe gas flow from a gas cylinder, with the ability to switch to a second cylinder - eliminating downtime of your appliance and allowing an empty cylinder to be replaced whenever convenient. The kit includes a GasBOAT 4208 regulator connected to a manual changeover valve, two stainless steel mounting brackets and two GasBOAT 4417 stainless steel gas hoses (with 20 year replacement life). These feature an M20 male threaded inlet which can be adapted to any gas cylinder in the world with the GasBOAT 4016 Adaptor Kit. This regulator is suitable for use with propane and butane gas with a 30mbar (1.6kg/hr) 3/8" female BSP outlet. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to ISO 10239..

(9)

336.33€ 314.47€ Ex Tax: 314.47€

Gas Regulator and Changeover Kit GasBOAT 4408/R (2 x M20 Threads)

Gas Regulator and Changeover Kit GasBOAT 4408/R (2 x M20 Threads) GasBOAT gas regulator and changeover system designed to provide steady and safe gas flow from a gas cylinder, with the ability to switch to a second cylinder - eliminating downtime of your appliance and allowing an empty cylinder to be replaced whenever convenient. The kit includes a GasBOAT 4208 regulator connected to a manual changeover valve, two stainless steel mounting brackets and two GasBOAT 4017 rubber gas hoses (with 5 year replacement life). These feature an M20 male threaded inlet which can be adapted to any gas cylinder in the world with the GasBOAT 4016 Adaptor Kit. This regulator is suitable for use with propane and butane gas with a 30mbar (1.6kg/hr) 3/8" female BSP outlet. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to ISO 10239:2014 and B..

(10)

297.00€ 277.70€ Ex Tax: 277.70€

Automatic Gas Cut Off Valve (3/8" BSPF)

Automatic Gas Cut Off Valve (3/8" BSPF) Valves such as this Clesse automatic gas cut off valve are mandatory on all British fishing vessels over 10 metres long using LPG. The gas cut off valve has 3/8” BSP female connections. Specifications Brand Clesse Thread Gender Female Thread Size 3/8" BSP Female ..

(8)

296.73€ 277.44€ Ex Tax: 277.44€

Gas Alarm With Single Detector Head Pilot Mini Mk2 (12V & 24V)

Gas Alarm With Single Detector Head Pilot Mini Mk2 (12V & 24V) A Pilot single channel gas alarm is an important and cost effective item of safety equipment wherever gas or other dangerous vapours may be present in the environment. However good a gas or engine installation may be there can be occasions when either a due to mechanical failure or human error, a potentially lethal leak may occur. Many of the vapours present on boats and in caravans such as butane, propane and petrol are heavier than air, meaning even a small leak can soon build up to dangerous proportions in the bilge of a boat or in an inadequately ventilated caravan. Pilot gas alarms are not fitted with an on / off switch as they are designed to be permanently on whenever the master switch is activated. The Pilot gas alarm also has a built in test feature to ensure the system works correctly. The Pilot single channel gas alarm control box is sup..

(12)

259.74€ 242.86€ Ex Tax: 242.86€

Dometic GasChecker GC 100 LPG Level Checker

Dometic GasChecker GC 100 LPG Level Checker The Dometic GasChecker GC 100 pocket-sized gas level checker for propane gas bottles. The Dometic GasChecker GC 100 instantly provides you with a reliable measurement of how much LPG you have left in your propane tank, giving piece of mind while on the water or on the road. - Convenient - Pocket-Sized - Accurate - Ultrasonic sensor - Small and lightweight, easy to stow away - Ideal for use boating, camping, touring, or at home Approvals Ex and CE Height 113mm (4.4") ..

(3)

195.21€ 182.52€ Ex Tax: 182.52€

Tester for Gas Leaks (10mm Compression Fittings)

Tester for Gas Leaks (10mm Compression Fittings) This 'bubble tester' gas leak detector is designed to be connected close to the outlet side of the gas regulator. It then provides an instant visible check for leaks. Bubbles in the chamber indicate a leak downstream of the tester. Boat safety scheme approved. Supplied with tester fluid. Specifications Approvals Boat Safety Scheme Approved Capacity 12kW Height 90mm (3.54") Width 60mm Brand Alde Compression Fitting Size ..

(6)

172.26€ 161.06€ Ex Tax: 161.06€

Tester for Gas Leaks (8mm Compression Fittings)

Tester for Gas Leaks (8mm Compression Fittings) This 'bubble tester' gas leak detector is designed to be connected close to the outlet side of the gas regulator, featuring an 8mm compression fitting size. It then provides an instant visible check for leaks. Bubbles in the chamber indicate a leak downstream of the tester. Boat safety scheme approved. Supplied with tester fluid. Specifications Approvals Boat Safety Scheme Approved Capacity 12kW Height 90mm (3.54") Width 60mm Brand Alde Com..

(14)

168.75€ 157.78€ Ex Tax: 157.78€

Carbon monoxide detector MTCO 12v

Carbon monoxide detector MTCO 12vGas detector MTCO senses the presence of carbon monoxide in the air. An acoustic signal indicates the presence of gas in the air before it takes effect on people in the cabin of small boats. Carbon monoxide is a poisonous gas produced by incomplete combustion of any fossil fuel. It is odorless, tasteless and colorless and can leak from pipes, cooking stoves and heating systems not perfectly maintained or damaged. Each sensor is tested and calibrated with the reference gas. Power supply 12V. Dim. mm. 60x60..

(14)

154.75€ 133.47€ Ex Tax: 133.47€

Gas Pressure Gauge GasBOAT 4107 (M20 & W20 Fittings)

Gas Pressure Gauge GasBOAT 4107 (M20 & W20 Fittings) Marine pressure gauge to display the pressure coming from the gas cylinder. This gauge is placed at either end of the high pressure hose, between the gas cylinder and the regulator. It is housed in a stainless steel case and is filled with glycerine to improve accuracy and life of the gauge. The gauge conforms to EN ISO 10239-2008 and measures between 0-14 bar (0-200 PSI). Specifications Brand GasBOAT Thread Gender Female|Male Diameter Dial: 40mm Model 4107 Pressure Rating 0..

(13)

141.00€ 131.84€ Ex Tax: 131.84€

ENO Gas leak Detector

ENO Gas leak DetectorThis device is installed near the gas cylinder, after the regulator pressure, and is used to identify any gas leaks downstream of the butane bottle..

(8)

149.45€ 128.90€ Ex Tax: 128.90€

Gas Connector for Barbeque and Cookers

Gas Connector for Barbeque and Cookers ..

(9)

147.52€ 127.24€ Ex Tax: 127.24€

BS 3212/2 Gas Hose (10mm ID / 10 Metre Coil)

BS 3212/2 Gas Hose (10mm ID / 10 Metre Coil) This 10mm gas hose is sold per 10 metre coil. The orange coloured rubber gas hose is designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved. The gas hose is designed to not exceed 20 bar of pressure. Approvals BS3212 (Part 2) RCD approved. Conforms to EN5591995. Operating Temperature -40ºC to +90ºC Work..

(11)

127.23€ 118.96€ Ex Tax: 118.96€

Kit ENO for Gas Connection

Kit ENO for Gas ConnectionConnection kit for cylinder consisting of regulator with tap and flexible hose..

(12)

134.69€ 116.17€ Ex Tax: 116.17€

Marine Gas Regulator for Propane GasBOAT 4207 (5/8" POL Male BSP)

Marine Gas Regulator for Propane GasBOAT 4207 (5/8" POL Male BSP) GasBOAT gas regulator designed to provide steady and safe gas flow from a gas cylinder. This regulator is suitable for use with propane gas, and fits to the gas cylinder with a 5/8" POL male BSP connection. Includes a 30mbar (1.6kg/hr) 3/8" female BSP outlet supplied with an 8mm hose tail to connect to standard gas hose. The GasBOAT 4207 is designed to fit directly onto the gas cylinder. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to ISO 10239:2014 and BS EN 16129 annex M (2013) standards and ensures your insurance policy will be valid for gas related incidents. The regulator is made from marine grade materials, features reinforced nitrile diaphragms and over-pressure relief at 75mbar to prevent damage to the appliance. The regulator has a 6 year replacem..

(7)

111.24€ 104.01€ Ex Tax: 104.01€

Marine Gas Regulator for Propane/Butane GasBOAT 4208 (21.8mm LH Nut)

Marine Gas Regulator for Propane/Butane GasBOAT 4208 (21.8mm LH Nut) GasBOAT gas regulator designed to provide steady and safe gas flow from a gas cylinder. This regulator is suitable for use with propane and butane gas, and fits to the gas cylinder with a 21.8mm left hand female nut connection. Includes a 30mbar (1.6kg/hr) 3/8" female BSP outlet supplied with an 8mm hose tail to connect to standard gas hose. The GasBOAT 4208 is designed to fit directly onto the gas cylinder. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to ISO 10239:2014 and BS EN 16129 annex M (2013) standards and ensures your insurance policy will be valid for gas related incidents. The regulator is made from marine grade materials, features reinforced nitrile diaphragms and over-pressure relief at 75mbar to prevent damage to the appliance. The regulat..

(9)

109.44€ 102.33€ Ex Tax: 102.33€

BS 3212/2 Gas Hose (8mm ID / 10 Metre Coil)

BS 3212/2 Gas Hose (8mm ID / 10 Metre Coil) This gas hose is sold per 10 metre coil. The orange coloured rubber gas hose is designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved. The gas hose is designed to not exceed 20 bar of pressure. Approvals BS3212 (Part 2) RCD approved. Conforms to EN5591995. Operating Temperature -40ºC to +90ºC Working Pr..

(9)

107.13€ 100.17€ Ex Tax: 100.17€

Marine Gas Regulator for Campingaz GasBOAT 4005 (16mm x 1.5)

Marine Gas Regulator for Campingaz GasBOAT 4005 (16mm x 1.5) GasBOAT gas regulator designed to provide steady and safe gas flow from a gas cylinder. This regulator is suitable for use with Campingaz, and fits to the gas cylinder with a 16mm x 1.5 connection. Includes a 30mbar (0.8kg/hr) M20 threaded outlet supplied with an 8mm hose tail to connect to standard gas hose. The GasBOAT 4005 is an all in one compact unit with a simple to use on/off locking valve. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to ISO 10239:2014 and BS EN 16129 annex M (2013) standards and ensures your insurance policy will be valid for gas related incidents. The regulator is made from marine grade materials, features reinforced nitrile diaphragms and over-pressure relief at 75mbar to prevent damage to the appliance. The regulator has a 6 year rep..

(5)

104.04€ 97.28€ Ex Tax: 97.28€

Storage Box for CampingGas 397 x 356 x 240mm

Storage Box for CampingGas 397 x 356 x 240mmStorage hatch for gas bottle of 3 kg. in ASA, UV resistent...

(5)

112.20€ 96.77€ Ex Tax: 96.77€

Marine Gas Regulator for Propane/Butane GasBOAT 4009 (M20 Thread)

Marine Gas Regulator for Propane/Butane GasBOAT 4009 (M20 Thread) GasBOAT gas regulator designed to provide steady and safe gas flow from a gas cylinder. This regulator is suitable for use with propane and butane gas, and features an M20 male threaded inlet which can be adapted to any gas cylinder in the world with the GasBOAT 4018 Adaptor Kit. Includes a 30mbar (1.6kg/hr) 3/8" female BSP outlet. The GasBOAT 4009 is designed to be bulkhead mounted. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to ISO 10239:2014 and BS EN 16129 annex M (2013) standards and ensures your insurance policy will be valid for gas related incidents. The regulator is made from marine grade materials, features reinforced nitrile diaphragms and over-pressure relief at 75mbar to prevent damage to the appliance. The regulator has a 6 year replacement ..

(7)

102.99€ 96.30€ Ex Tax: 96.30€

Spare Head and Cable for Pilot Gas Detector

Spare Head and Cable for Pilot Gas Detector Replacement gas detector head for Pilot gas alarms. Complete fitted with 3.5 metres of cable. The old brown coloured wire corresponds to the new red wire. The old blue coloured wire corresponds to the new blue & black wire. The old green & yellow coloured wire corresponds to the new yellow wire. Specifications Voltage 12V DC, 24V DC Brand Pilot Country of Origin United Kingdom ..

(3)

102.90€ 96.21€ Ex Tax: 96.21€

Marine Gas Regulator for Propane/Butane GasBOAT 4001 (21mm Clip On)

Marine Gas Regulator for Propane/Butane GasBOAT 4001 (21mm Clip On) GasBOAT gas regulator designed to provide steady and safe gas flow from a gas cylinder. This regulator is suitable for use with propane and butane gas, and fits to the gas cylinder with a 21mm clip on connection. Includes a 30mbar (1.5kg/hr) M20 threaded outlet supplied with an 8mm hose tail to connect to standard gas hose. The GasBOAT 4001 is an all in one compact unit with a simple to use on/off locking valve. This is a marine grade gas regulator, having been designed and built specifically to cope with the harsh marine environment. It conforms to BS EN 12864 annex M (2013) standard and ensures your insurance policy will be valid for gas related incidents. The regulator is made from marine grade materials, features reinforced nitrile diaphragms and over-pressure relief at 75mbar to prevent damage to the appliance. The regulator has a 6 year r..

(3)

98.88€ 92.45€ Ex Tax: 92.45€

LPG Gas detector 12v

LPG Gas detector 12vGas detector MTG senses the presence in the air of LPG and ether. An acoustic signal indicates the presence of gas in the air before it takes effect on people in the cabin of small boats and before its concentration reaches a tenth of the minimum required to trigger a possible explosion. Two settings allow you to to adjust the sensitivity of the sensor based on the use and the installation location.Each sensor is tested and calibrated with the reference gas.Power supply 12V. Dim. mm. 60x60...

(9)

98.94€ 85.33€ Ex Tax: 85.33€

Spare Head for Pilot Gas Detector

Spare Head for Pilot Gas Detector This replacement Pilot gas detector head is suitable for Pilot gas alarms. The old brown coloured wire corresponds to the new red wire. The old blue coloured wire corresponds to the new blue & black wire. The old green & yellow coloured wire corresponds to the new yellow wire. Specifications Voltage 12V DC, 24V DC Brand Pilot Country of Origin United Kingdom ..

(3)

81.24€ 75.96€ Ex Tax: 75.96€

Bullfinch Gas Ball Valve (Foot Mounted / 3/8" Compression)

Bullfinch Gas Ball Valve (Foot Mounted / 3/8" Compression) Bullfinch mini ball valve suitable for use with gas (propane, butane and natural gas) as well as diesel oil. The ball valve body is made from nickel plated brass with a chrome and nickel plated brass ball. The ball valve contains a Teflon PTFE body seal and a nitrile shaft seal, and is supplied with nuts and brass olives. The ball valve is designed to connect two pieces of copper pipe and has a full bore design for minimum pressure drop. The valve features an integral foot mounting to secure the valve down without additional pipe supports. The valve is completely factory tested and conforms to European Standard for Gas Valves - EN 331:1995. Specifications Operating Temperature -20°Celsius to +60°Celsius Brand ..

(7)

79.74€ 74.56€ Ex Tax: 74.56€

Gas Hose GasBOAT 4417 Stainless Steel ISO 10380 (M20 Thread / 788mm)

Gas Hose GasBOAT 4417 Stainless Steel ISO 10380 (M20 Thread / 788mm) GasBOAT high pressure flexible hose conforms to ISO 10380 standards and complies with requirement 6.3.1 of ISO 10239 (2014-12-01) for Small Craft LPG systems. This is a 788mm (31") length of convoluted stainless steel hose featuring stainless steel nuts at each end, connecting to M20 fittings to connect gas cylinder adaptors to regulators. This hose has a 20 year replacement life. Specifications Approvals ISO 10380 and 6.3.1 of ISO 10239 (2014-12-01) Length 788mm (31") Brand GasBOAT Construction Convoluted stainless steel with stainless..

(9)

79.32€ 74.16€ Ex Tax: 74.16€

Gas Hose GasBOAT 4417 Stainless Steel ISO 10380 (M20 Thread / 534mm)

Gas Hose GasBOAT 4417 Stainless Steel ISO 10380 (M20 Thread / 534mm) GasBOAT high pressure flexible hose conforms to ISO 10380 standards and complies with requirement 6.3.1 of ISO 10239 (2014-12-01) for Small Craft LPG systems. This is a 534mm (21") length of convoluted stainless steel hose featuring stainless steel nuts at each end, connecting to M20 fittings to connect gas cylinder adaptors to regulators. This hose has a 20 year replacement life. Specifications Approvals ISO 10380 and 6.3.1 of ISO 10239 (2014-12-01) Length 534mm (21") Brand GasBOAT Construction Convoluted stainless steel with stainless..

(12)

79.32€ 74.16€ Ex Tax: 74.16€

Cooker Hose GasBOAT 6013 Galvanised BS 3212 (3/8" / 914mm)

Cooker Hose GasBOAT 6013 Galvanised BS 3212 (3/8" / 914mm) GasBOAT over-braided cooker hose conforms to BS 3212 type 2 standards. This is a 914mm (36") length of galvanised hose with 10mm internal bore, featuring 3/8" copper standpipe ends. Specifications Approvals BS 3212 type 2 Length 914mm (36") Brand GasBOAT Diameter 3/8" ends, 10mm internal bore Model 6013 ..

(5)

73.92€ 69.12€ Ex Tax: 69.12€

Cooker Hose GasBOAT 6013 Galvanised BS 3212 (3/8" / 610mm)

Cooker Hose GasBOAT 6013 Galvanised BS 3212 (3/8" / 610mm) GasBOAT over-braided cooker hose conforms to BS 3212 type 2 standards. This is a 610mm (24") length of galvanised hose with 10mm internal bore, featuring 3/8" copper standpipe ends. Specifications Approvals BS 3212 type 2 Length 610mm (24") Brand GasBOAT Diameter 3/8" ends, 10mm internal bore Model 6013 ..

(5)

73.92€ 69.12€ Ex Tax: 69.12€

Cooker Hose GasBOAT 6012 Galvanised BS 3212 (5/16" / 914mm)

Cooker Hose GasBOAT 6012 Galvanised BS 3212 (5/16" / 914mm) GasBOAT over-braided cooker hose conforms to BS 3212 type 2 standards. This is a 914mm (36") length of galvanised cooker hose with 8.3mm internal bore, featuring 5/16" copper standpipe ends. Specifications Approvals BS 3212 type 2 Length 914mm (36") Brand GasBOAT Diameter 5/16" ends, 8.3mm internal bore Model 6012 ..

(6)

73.92€ 69.12€ Ex Tax: 69.12€

Cooker Hose GasBOAT 6012 Galvanised BS 3212 (5/16" / 610mm)

Cooker Hose GasBOAT 6012 Galvanised BS 3212 (5/16" / 610mm) GasBOAT over-braided cooker hose conforms to BS 3212 type 2 standards. This is a 610mm (24") length of galvanised hose with 8.3mm internal bore, featuring 5/16" copper standpipe ends. Specifications Approvals BS 3212 type 2 Length 610mm (24") Brand GasBOAT Diameter 5/16" ends, 8.3mm internal bore Model 6012 ..

(12)

73.92€ 69.12€ Ex Tax: 69.12€

Pressure Regulator Magma Type 2

Pressure Regulator Magma Type 2Type 2 pressure regulator (low pressure) for use with gas cylinders CV470 and CV270 Camping Gaz. Complete with collar..

(3)

71.23€ 59.83€ Ex Tax: 59.83€

Pressure Regulator Magma Type 3

Pressure Regulator Magma Type 3Type 3 pressure regulator (low pressure) for use with propane cylinders..

(10)

68.46€ 57.51€ Ex Tax: 57.51€

Bullfinch Gas Ball Valve (Foot Mounted / 5/16" Compression)

Bullfinch Gas Ball Valve (Foot Mounted / 5/16" Compression) Bullfinch mini ball valve suitable for use with gas (propane, butane and natural gas) as well as diesel oil. The ball valve body is made from nickel plated brass with a chrome and nickel plated brass ball. The ball valve contains a Teflon PTFE body seal and a nitrile shaft seal, and is supplied with nuts and brass olives. The ball valve is designed to connect two pieces of copper pipe and has a full bore design for minimum pressure drop. The valve features an integral foot mounting to secure the valve down without additional pipe supports. The valve is completely factory tested and conforms to European Standard for Gas Valves - EN 331:1995. Specifications Operating Temperature -20°Celsius to +60°Celsius Brand ..

(15)

55.50€ 51.89€ Ex Tax: 51.89€

Magma Venturi Pipe

Magma Venturi PipeVenturi pipe for gas inlet..

(3)

59.63€ 50.09€ Ex Tax: 50.09€

Gas Hose GasBOAT 4017 Rubber BS3212-2 (M20 Thread / 788mm)

Gas Hose GasBOAT 4017 Rubber BS3212-2 (M20 Thread / 788mm) GasBOAT high pressure flexible hose complies with BS3212-2 standards and complies with requirement 6.3.1 of ISO 10239 (2014-12-01) for Small Craft LPG systems. This is a 788mm (31") length of black rubber hose featuring a stainless steel swage and brass nut at each end, connecting to M20 fittings to connect gas cylinder adaptors to regulators. This hose has a 5 year replacement life. Specifications Approvals BS3212-2 and 6.3.1 of ISO 10239 (2014-12-01) Length 788mm (31") Brand GasBOAT Construction Rubber with stainless steel swages and brass nuts..

(12)

51.93€ 48.55€ Ex Tax: 48.55€

Gas Hose BS3212-2 GasBOAT 4017 (M20 Thread / 534mm)

Gas Hose BS3212-2 GasBOAT 4017 (M20 Thread / 534mm) GasBOAT high pressure flexible hose conforms to BS3212-2 standards and complies with requirement 6.3.1 of ISO 10239 (2014-12-01) for Small Craft LPG systems. This is a 534mm (21") length of black rubber hose featuring a stainless steel swage and brass nut at each end, connecting to M20 fittings to connect gas cylinder adaptors to regulators. This hose has a 5 year replacement life. Specifications Approvals BS3212-2 and 6.3.1 of ISO 10239 (2014-12-01) Length 534mm (21") Brand GasBOAT Construction Rubber with stainless steel swages and brass nuts ..

(9)

51.93€ 48.55€ Ex Tax: 48.55€

Gas Cylinder Adaptor GasBOAT 4013 (Male POL NPT to M20)

Gas Cylinder Adaptor GasBOAT 4013 (Male POL NPT to M20) Gas cylinder adaptor fitting with Male POL NPT inlet and M20 threaded outlet, suitable for use with Butane and Propane cylinders of the type found in USA, Australasia, Iceland and Scandinavia. This adaptor is constructed from solid brass. Connects to GasBOAT 4017 or 4417 high pressure gas hose. Specifications Brand GasBOAT Connections Male POL NPT Cylinder Connection Model 4013 Suitability Propane and Butane Gas Thread Size Outlet: M20 Male ..

(13)

51.93€ 48.55€ Ex Tax: 48.55€

Gas Cylinder Adaptor GasBOAT 4012 (21.8mm LH Nut to M20)

Gas Cylinder Adaptor GasBOAT 4012 (21.8mm LH Nut to M20) Gas cylinder adaptor fitting with 21.8mm Left Hand Nut inlet and M20 threaded outlet, suitable for use with Butane and Propane cylinders of the type found in the UK, France, Holland, Belgium, Germany, Croatia and the Far East. This adaptor is constructed from solid brass. Connects to GasBOAT 4017 or 4417 high pressure gas hose. Specifications Brand GasBOAT Connections 21.8mm LH Female Nut Cylinder Connection Model 4012 Suitability Propane and Butane Gas Thread Size Outle..

(5)

51.93€ 48.55€ Ex Tax: 48.55€

Gas Cylinder Adaptor GasBOAT 4011 (5/8" POL Male BSP to M20)

Gas Cylinder Adaptor GasBOAT 4011 (5/8" POL Male BSP to M20) Gas cylinder adaptor fitting with 5/8" POL Male BSP inlet and M20 threaded outlet, suitable for use with Propane cylinders of the type found in the UK. This adaptor is constructed from solid brass. Connects to GasBOAT 4017 or 4417 high pressure gas hose. Specifications Brand GasBOAT Connections 5/8" Male POL (BSP) Cylinder Connection Model 4011 Suitability Propane Gas Thread Size Outlet: M20 Male ..

(6)

51.93€ 48.55€ Ex Tax: 48.55€

Gas Cylinder Adaptor GasBOAT 4010 (16mm x 1.5mm to M20)

Gas Cylinder Adaptor GasBOAT 4010 (16mm x 1.5mm to M20) Gas cylinder adaptor fitting with 16mm x 1.5mm inlet and M20 threaded outlet, suitable for use with Campingaz and other cylinders found in Eastern Mediterranean. Features a built in on/off valve on the top. Connects to GasBOAT 4017 or 4417 high pressure gas hose. Specifications Brand GasBOAT Connections 16mm x 1.5 Cylinder Connection Model 4010 Suitability Campingaz Thread Size Outlet: M20 Male ..

(10)

51.93€ 48.55€ Ex Tax: 48.55€

Pressure Regulator ENO

Pressure Regulator ENO..

(14)

53.88€ 45.53€ Ex Tax: 45.53€

Gas Adaptor ENO

Gas Adaptor ENO..

(11)

52.79€ 44.34€ Ex Tax: 44.34€

Valve for Gas ENO

Valve for Gas ENO..

(10)

43.83€ 37.03€ Ex Tax: 37.03€

Tap For Gas Bottle ENO

Tap For Gas Bottle ENO..

(12)

43.83€ 37.03€ Ex Tax: 37.03€

Gas Hose ENO 1.5mt

Gas Hose ENO 1.5mt..

(13)

39.31€ 33.22€ Ex Tax: 33.22€

Pre Made BS 3212 Gas Hose (3/8" Spigots / 36" Length)

Pre Made BS 3212 Gas Hose (3/8" Spigots / 36" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 36" Hose Spigot OD 3/8" Replaces Hose 307648 Spigot ..

(4)

34.98€ 32.71€ Ex Tax: 32.71€

Gas Hose BS 3212 (3/8" Spigots / 30" Length)

Gas Hose BS 3212 (3/8" Spigots / 30" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 30" Hose Spigot OD 3/8" Spigot Size 3/8" Outside Diameter ..

(15)

32.91€ 30.77€ Ex Tax: 30.77€

Gas Hose ENO 1mt

Gas Hose ENO 1mt..

(13)

35.89€ 30.33€ Ex Tax: 30.33€

Pre Made BS 3212 Gas Hose (3/8" Spigots / 24" Length)

Pre Made BS 3212 Gas Hose (3/8" Spigots / 24" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 24" Hose Spigot OD 3/8" Spigot Size 3/8" Outside Diameter ..

(5)

30.78€ 28.78€ Ex Tax: 28.78€

Gas Hose ENO 0.6mt

Gas Hose ENO 0.6mt..

(4)

32.46€ 27.43€ Ex Tax: 27.43€

Gas Hose BS 3212 (3/8" Spigots / 18" Length)

Gas Hose BS 3212 (3/8" Spigots / 18" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 18" Hose Spigot OD 3/8" Spigot Size 3/8" Outside Diameter ..

(11)

28.65€ 26.79€ Ex Tax: 26.79€

Seaflow Pre Made BS 3212 Gas Hose (5/16" Spigots / 36" Length)

Seaflow Pre Made BS 3212 Gas Hose (5/16" Spigots / 36" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 36" Hose Spigot OD 5/16" Spigot Size 5/16" Outside Diameter ..

(6)

27.63€ 25.83€ Ex Tax: 25.83€

Gas Hose BS 3212 (5/16" Spigots / 30" Length)

Gas Hose BS 3212 (5/16" Spigots / 30" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 30" Hose Spigot OD 5/16" Spigot Size 5/16" Outside Diameter ..

(4)

25.86€ 24.18€ Ex Tax: 24.18€

Gas Hose BS 3212 (1/4" Spigots / 36" Length)

Gas Hose BS 3212 (1/4" Spigots / 36" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 36" Hose Spigot OD 1/4" Spigot Size 1/4" Outside Diameter ..

(8)

24.75€ 23.14€ Ex Tax: 23.14€

Pre Made BS 3212 Gas Hose (5/16" Spigots / 24" Length)

Pre Made BS 3212 Gas Hose (5/16" Spigots / 24" Length) Orange rubber gas hose designed for the marine market. This gas hose is BS 3212 (type 2) RCD approved and BSS approved up to one metre. It is designed to not exceed 17.5 bar of pressure. This gas hose is sold pre made with copper spigots held by swaged stainless steel ferrules. This gas hose is available with 1/4", 5/16" and 3/8" spigots, in lengths of 18", 24", 30" and 36". Specifications Approvals BS3212 (Part 2) RCD approved. BSS approved up to 1 Metre Length 24" Hose Spigot OD 5/16" Spigot Size 5/16" Outside Diameter ..

(4)

24.00€ 22.44€ Ex Tax: 22.44€