Electrical Terminals and Connectors

Electrical Terminals and Connectors

Electrical Terminals and Connectors

Show:
Sort By:

Victron Busbar with Polycarbonate Cover (600A / 8 Terminals)

Victron Busbar with Polycarbonate Cover (600A / 8 Terminals) Victron Busbars are suitable to be used for high current distribution and at the same time they provide connections for batteries and/or other DC equipment. This Victron Busbar features 8 terminals and has a 600 amp current rating. Each VBB160080010 busbar is supplied with a removable protection cover. Amps 600A Approvals NEN-EN-ISO 9001:2015 ..

(7)

395.02€ 391.07€ Ex Tax: 391.07€

Victron Busbar with Polycarbonate Cover (600A / 4 Terminals)

Victron Busbar with Polycarbonate Cover (600A / 4 Terminals) Victron Busbars are suitable to be used for high current distribution and at the same time they provide connections for batteries and/or other DC equipment. This Victron Busbar features 4 terminals and has a 600 amp current rating. Each VBB160040010 busbar is supplied with a removable protection cover. Amps 600A Height With Cover: 65mm (2.6"), Terminal: 19mm (0.76") ..

(15)

254.10€ 251.56€ Ex Tax: 251.56€

Crimping Tools from 0.25 to 6mm2

Crimping Tools from 0.25 to 6mm2Compact professional pincers for 0,25 to 6 mm2 pre-insulated terminals and connectors. High precision investment cast Steel jaws. Ratchet controlled to ensure precise and consistent crimping. ..

(13)

152.82€ 149.38€ Ex Tax: 149.38€

VTE Jump Start Power Connector Unit (Flush Mount)

VTE Jump Start Power Connector Unit (Flush Mount) Have you ever had to jump start an engine? If so, you will know that this generally involves carrying a heavy battery into the engine room, often not the easiest or simplest of places to access. This ingenious device does away with that. It can be positioned for convenience. It comes as a flush mount kit, with an adhesive drilling template decal, and is fitted with colour coded safety cover caps too. A battery charger / jump start device can be connected here, thereby reducing the wiring required for a charging connection. As a bonus, should you need to use a portable battery powered device (such as a refuelling pump) the same convenience is there again, as you can simply connect the accessory's crocodile clips to the power connector posts rather than having to gain access to the battery. This power connector unit is suitable for flush mounting. ..

(13)

130.47€ 129.16€ Ex Tax: 129.16€

Victron Busbar with Polycarbonate Cover (250A / 4 Terminals)

Victron Busbar with Polycarbonate Cover (250A / 4 Terminals) Victron Busbars are suitable to be used for high current distribution and at the same time they provide connections for batteries and/or other DC equipment. This Victron Busbar features 4 terminals and has a 250 amp current rating. Each VBB125040010 busbar is supplied with a removable protection cover. Amps 250A Height With Cover: 48mm (1.9"), Terminal: 17mm (0.67") ..

(4)

129.36€ 128.07€ Ex Tax: 128.07€

Electrical Crimping Tool for Superseal Connectors

Electrical Crimping Tool for Superseal Connectors Ratchet crimping tool for Superseal/Econoseal from the Electrical range. This crimping tool is suitable for use with all superseals used with cables between 0.5mm² and 1.5mm². The ratchet design ensures that the correct crimping pressure is applied to the superseal before it is released, however the pressure can be adjusted if needed. This should help prevent the terminals getting damaged or being fitted with loose connections. The tool features comfortable ergonomic handles for comfort and ease of use. Specifications Brand Electrical ..

(7)

126.54€ 125.27€ Ex Tax: 125.27€

VTE Black 750A Power Distribution Busbar (2 x 5/16" & 1 x 3/8" Posts)

VTE Black 750A Power Distribution Busbar (2 x 5/16" & 1 x 3/8" Posts) VTE black hi-amp busbar / distribution point for up to 32V DC electrical systems. Order 729277 cover to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 750A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 32V DC Brand VTE Colour Black Connections 2 x 5/16" Posts, 1 x Central 3/8" Pos..

(13)

115.50€ 114.35€ Ex Tax: 114.35€

VTE Red 750A Power Distribution Busbar (2 x 5/16" & 1 x 3/8" Posts)

VTE Red 750A Power Distribution Busbar (2 x 5/16" & 1 x 3/8" Posts) VTE red hi-amp busbar / distribution point for DC systems up to 32v dc. Max 750 amps. 2 x 5/16" posts and one central 3/8" post. Stainless posts, plate, screws and hex nuts. Nickel plated brass connection plate. Glass filled red nylon base. Mounting hole centres 101.7mm. Order 729278 cover to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 750A Approvals Meets ISO regulations regarding continuously energised terminals Voltage Maximum: 32V DC Brand VTE ..

(5)

113.31€ 112.18€ Ex Tax: 112.18€

VTE Red 250A Power Distribution Busbar (8 x 3/8" Posts)

VTE Red 250A Power Distribution Busbar (8 x 3/8" Posts) VTE red single pole busbar for DC systems up to 48v dc. Max load 250amps. Features two rows of four 3/8" post terminals with 3 additional 20amp screw connectors on each row. Stainless posts, screws and hex nuts. Mounting hole centres 124.5mm. Screw connector diameters 4mm. Glass filled red base. Ideal for positive circuit uses. Order cover 729229 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 250A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand ..

(6)

103.33€ 102.30€ Ex Tax: 102.30€

VTE Black 250A Power Distribution Busbar (4 x 5/16" & 4 x 3/8" Posts)

VTE Black 250A Power Distribution Busbar (4 x 5/16" & 4 x 3/8" Posts) VTE black dual pole busbar for DC systems up to 48v dc. Max load 250amps. Features 4 x 5/16" negative posts with 3 additional 20amp screw connections and 4 x 3/8" positive posts with 3 additional 20amp screw point connections. Stainless posts, screws and hex nuts. Mounting hole centres 124.5mm. Glass filled black base. Order cover 729229 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 250A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand ..

(15)

97.89€ 96.91€ Ex Tax: 96.91€

VTE Black 250A Power Distribution Busbar (8 x 5/16" Posts)

VTE Black 250A Power Distribution Busbar (8 x 5/16" Posts) VTE black single pole busbar for DC systems up to 48v dc. Max load 250amps. Features two rows of four 5/16" post terminals with 3 additional 20amp screw connectors on each row. Stainless posts, screws and hex nuts. Mounting hole centres 124.5mm. Screw connector diameters 4mm. Glass filled black base. Ideal for negative circuit uses. Order cover 729229 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 250A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand ..

(4)

97.20€ 96.23€ Ex Tax: 96.23€

Victron Busbar with Polycarbonate Cover (150A / 6 Terminals)

Victron Busbar with Polycarbonate Cover (150A / 6 Terminals) Victron Busbars are suitable to be used for high current distribution and at the same time they provide connections for batteries and/or other DC equipment. This Victron Busbar features 6 terminals and has a 150 amp current rating. Each VBB115060020 busbar is supplied with a removable protection cover. Amps 150A Height With Cover: 45mm (1.8"), Terminal: 17mm (0.67") ..

(10)

85.07€ 84.22€ Ex Tax: 84.22€

Electrical Heavy Duty Crimping Tool for Pre Insulated Terminals

Electrical Heavy Duty Crimping Tool for Pre Insulated Terminals Heavy duty ratchet crimp terminal tool from the Electrical range. This crimping tool is suitable for use with all pre insulated terminals in red, blue and yellow. The ratchet design ensures that the correct crimping pressure is applied to the terminal before it is released. Specifications Brand Electrical ..

(11)

84.88€ 84.03€ Ex Tax: 84.03€

VTE Red Power Distribution Busbar (1 x 1/4" Post & 30 x 6.3mm Tabs)

VTE Red Power Distribution Busbar (1 x 1/4" Post & 30 x 6.3mm Tabs) VTE red 30 point tab type busbar / distribution point For "push-on" type quick disconnect terminals. These "push-on" type terminal type busbar power distribution points greatly increase production speed and reduce labour costs. They provide a neat and simple solution for negative or positive cable distribution. ..

(15)

82.47€ 81.65€ Ex Tax: 81.65€

VTE Black Power Distribution Busbar (1 x 1/4" Post & 30 x 6.3mm Tabs)

VTE Black Power Distribution Busbar (1 x 1/4" Post & 30 x 6.3mm Tabs) VTE black 30 point tab type busbar / distribution point For "push-on" type quick disconnect terminals. These "push-on" type terminal type busbar power distribution points greatly increase production speed and reduce labour costs. They provide a neat and simple solution for negative or positive cable distribution. ..

(10)

82.47€ 81.65€ Ex Tax: 81.65€

VTE Positive Power Bushing (Copper Core / 3/8" Stud / 0-3mm Panel)

VTE Positive Power Bushing (Copper Core / 3/8" Stud / 0-3mm Panel) VTE power bushing with copper core, designed to pass electrical current through bulkheads, partitions or panels. This power bushing is weatherproof and is supplied with a terminal insulator and panel seal. The copper core power bushing has a threaded 3/8" stud, made of nickel plated mild steel with a stainless steel fastener nut, while the insulator body is made from glass filled nylon. The VTE CCB376N0NR02W is a red power bushing to indicate positive polarity. Specifications Amps 550A Maximum at 12V DC Voltage 48V DC Maximum Brand VTE Colour ..

(14)

81.58€ 80.76€ Ex Tax: 80.76€

VTE Negative Power Bushing (Copper Core / 3/8" Stud / 0-3mm Panel)

VTE Negative Power Bushing (Copper Core / 3/8" Stud / 0-3mm Panel) VTE power bushing with copper core, designed to pass electrical current through bulkheads, partitions or panels. This power bushing is weatherproof and is supplied with a terminal insulator and panel seal. The copper core power bushing has a threaded 3/8" stud, made of nickel plated mild steel with a stainless steel fastener nut, while the insulator body is made from glass filled nylon. The VTE CCB376N0N14W is a black power bushing to indicate negative polarity. Specifications Amps 550A Maximum at 12V DC Voltage 48V DC Maximum Brand VTE Colour ..

(10)

81.58€ 80.76€ Ex Tax: 80.76€

Press Pincers for Electric Terminals 0.5 / 16mm2

Press Pincers for Electric Terminals 0.5 / 16mm2Special Steel alloy pincers for 0,5 to 16 mm2 nude and pre-insulated end sleeves. ..

(11)

86.96€ 78.26€ Ex Tax: 78.26€

Index Marine Medium Junction Box Kit (12 Way / IP67)

Index Marine Medium Junction Box Kit (12 Way / IP67) This junction box is water and dust proof up to IP67 ensuring it is suitable for the marine environment, features 10 flexible ports with double-membrane seals and a 12-way connector block. Specifications Height 54mm (2-1/8") Length 118mm Width 94mm Brand Index Marine Connections 12-way connector block through 10 Ports Construction Plastic Protection Rating ..

(5)

78.95€ 78.16€ Ex Tax: 78.16€

Electrical Heat Shrink Terminal Assortment Box (80 Pack)

Electrical Heat Shrink Terminal Assortment Box (80 Pack) Electrical assortment box containing a range of heat shrink pre insulated electrical terminals. There are 13 different varieties of terminal, equalling 80 terminals in total. The following terminals are included: Specifications Brand Electrical Pack Quantity 80 Colour Assorted ..

(15)

78.16€ 77.37€ Ex Tax: 77.37€

VTE Red Power Distribution Post (3/8" Connection)

VTE Red Power Distribution Post (3/8" Connection) This ASAP Electrical bus bar power distribution post kit is supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. ..

(13)

77.04€ 76.26€ Ex Tax: 76.26€

VTE Black Power Distribution Post (3/8" Connection)

VTE Black Power Distribution Post (3/8" Connection) This ASAP Electrical bus bar power distribution post kit is supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. ..

(15)

77.04€ 76.26€ Ex Tax: 76.26€

VTE Red Power Distribution Post (5/16" Connection)

VTE Red Power Distribution Post (5/16" Connection) This ASAP Electrical bus bar power distribution post kit is supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. Replaces 729204 Power Distribution Post. ..

(8)

76.61€ 75.85€ Ex Tax: 75.85€

VTE Black Power Distribution Post (5/16" Connection)

VTE Black Power Distribution Post (5/16" Connection) This ASAP Electrical bus bar power distribution post kit is supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. ..

(9)

76.61€ 75.85€ Ex Tax: 75.85€

VTE Red Power Distribution Post (1/4" Connection)

VTE Red Power Distribution Post (1/4" Connection) This ASAP Electrical bus bar power distribution post kit is supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. Replaces 729202 Power Distribution Post. ..

(8)

72.52€ 71.80€ Ex Tax: 71.80€

VTE Black Power Distribution Post (1/4" Connection)

VTE Black Power Distribution Post (1/4" Connection) This ASAP Electrical bus bar power distribution post kit is supplied with insulating cover and disk to comply with ISO regulations regarding continuously energised terminals. ..

(7)

72.52€ 71.80€ Ex Tax: 71.80€

VTE Black 210A Power Distribution Busbar (3 x 5/16" & 1 x 1/4" Posts)

VTE Black 210A Power Distribution Busbar (3 x 5/16" & 1 x 1/4" Posts) ASAP - VTE black 4 point busbar for DC systems up to 48v dc. Max load 210amps. 3 x 5/16" posts and 1 x 1/4" post. Black glass filled base. Ideal for negative circuit applications. Stainless posts and hex nuts. Tinned brass connecting components for maximum performance and reliability. Mounting hole centres 118.4mm. Order cover 729249 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 210A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand ..

(11)

69.66€ 68.96€ Ex Tax: 68.96€

VTE Red Power Distribution Busbar (1 x 1/4" Post & 10 x 6.3mm Tabs)

VTE Red Power Distribution Busbar (1 x 1/4" Post & 10 x 6.3mm Tabs) VTE red 10 point tab type busbar / distribution point For "push-on" type quick disconnect terminals. These "push-on" type terminal type busbar power distribution points greatly increase production speed and reduce labour costs. They provide a neat and simple solution for negative or positive cable distribution. ..

(6)

69.34€ 68.64€ Ex Tax: 68.64€

VTE Black Power Distribution Busbar (1 x 1/4" Post & 10 x 6.3mm Tabs)

VTE Black Power Distribution Busbar (1 x 1/4" Post & 10 x 6.3mm Tabs) VTE black 10 point tab type busbar / distribution point For "push-on" type quick disconnect terminals. These "push-on" type terminal type busbar power distribution points greatly increase production speed and reduce labour costs. They provide a neat and simple solution for negative or positive cable distribution. ..

(11)

69.34€ 68.64€ Ex Tax: 68.64€

VTE Red Power Distribution Busbar (1 x 1/4" Post & 20 x 6.3mm Tabs)

VTE Red Power Distribution Busbar (1 x 1/4" Post & 20 x 6.3mm Tabs) The tabbed power distribution bus bar is suitable for "push-on" type quick disconnect terminals. The "push-on" type terminal type bus bar power distribution points greatly increase production speed and reduce labour costs. The bus bar provides a neat and simple solution for negative or positive cable distribution. To meet ISO standards for protection of continuously energised terminals you should order a tab type bus bar cover kit. The ASAP electrical range of tab type bus bar distribution points is available in 10, 20, or 30 points. Specifications Amps Maximum: 55A at 12V per tier, 20A per connection Approvals Meets ISO Regulations Regarding Continuously Energised Terminals ..

(12)

69.12€ 68.42€ Ex Tax: 68.42€

VTE Black Power Distribution Busbar (1 x 1/4" Post & 20 x 6.3mm Tabs)

VTE Black Power Distribution Busbar (1 x 1/4" Post & 20 x 6.3mm Tabs) VTE black 20 point tab type busbar / distribution point For "push-on" type quick disconnect terminals. These "push-on" type terminal type busbar power distribution points greatly increase production speed and reduce labour costs. They provide a neat and simple solution for negative or positive cable distribution. Replaces Busbar 716014 ..

(9)

69.12€ 68.42€ Ex Tax: 68.42€

VTE Black Power Distribution Busbar (2 x 1/4" Posts)

VTE Black Power Distribution Busbar (2 x 1/4" Posts) VTE black busbar/distribution point for DC systems up to 48V DC, with ten 15 amp (max) screw connection points measuring 4mm and two 1/4" posts. The VTE 771025N0N14 busbar features nickel plated brass contact plates, with stainless posts, screws & hex nuts and a glass filled black nylon base. Mounting hole centres: 131.8mm. Order the 729259 - Busbar Cover to meet ISO standards for protection of continuously energised terminals. Specifications Approvals Meets ISO regulations regarding continuously energised terminals when ordered with cover 729259 Voltage Maximum: 48V Brand VTE Colour ..

(11)

67.75€ 67.07€ Ex Tax: 67.07€

VTE Red Power Distribution Busbar (2 x 1/4" Posts)

VTE Red Power Distribution Busbar (2 x 1/4" Posts) VTE black busbar/distribution point for DC systems up to 48v dc. 10 x 15amp (max) screw connection points and 2 x 1/4" posts. Nickel plated brass contact plates. Stainless posts, screws and hex nuts. Glass filled red nylon base. Mounting hole centres 131.8mm. Order cover 729259 to meet ISO standards for protection of continuously energised terminals. Specifications Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand VTE Colour Red Construction ..

(10)

66.13€ 65.47€ Ex Tax: 65.47€

Index Marine Medium Junction Box (10 Way / IP67)

Index Marine Medium Junction Box (10 Way / IP67) This junction box is water and dust proof up to IP67 ensuring it is suitable for the marine environment, features 10 flexible ports. Height 54mm (2-1/8") Length 118mm Width 94mm ..

(9)

64.33€ 63.69€ Ex Tax: 63.69€

VTE Black 210A Power Distribution Busbar (3 x 3/8" / 1 x 1/4" Posts)

VTE Black 210A Power Distribution Busbar (3 x 3/8" / 1 x 1/4" Posts) VTE black 4 point busbar for DC systems up to 48v dc. Max load 210amps. 3 x 3/8" posts and 1 x 1/4" post. Black glass filled base. Ideal for negative circuit applications. Stainless posts and hex nuts. Tinned brass connecting components for maximum performance and reliability. Mounting hole centres 118.4mm. Order cover 729249 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 210A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand VTE..

(7)

64.22€ 63.58€ Ex Tax: 63.58€

VTE Red 210A Power Distribution Busbar (3 x 3/8" / 1 x 1/4" Posts)

VTE Red 210A Power Distribution Busbar (3 x 3/8" / 1 x 1/4" Posts) VTE red 4 point busbar for DC systems up to 48v dc. Max load 210amps. 3 x 3/8" posts and 1 x 1/4" post. Red glass filled base. Ideal for positive circuit applications. Stainless posts and hex nuts. Tinned brass connecting components for maximum performance and reliability. Mounting hole centres 118.4mm. Order cover 729249 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 210A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand VTE ..

(11)

63.94€ 63.30€ Ex Tax: 63.30€

Index Marine Small Junction Box Kit with Splicer Kit (6 Way / IP67)

Index Marine Small Junction Box Kit with Splicer Kit (6 Way / IP67) This small junction box is water and dust proof up to IP67 ensuring it is suitable for the marine environment, features 6 flexible ports with double-membrane seals and a 6-way connector block. Contains splicer kit. Specifications Height 54mm (2-1/8") Length 94mm Width 64mm Brand Index Marine Connections 6-way connector block through 6 Ports Construction Plastic ..

(3)

62.82€ 62.19€ Ex Tax: 62.19€

Yellow Scotch Lock for 4mm²-6mm² Cable (100 Pack)

Yellow Scotch Lock for 4mm²-6mm² Cable (100 Pack) Pack of 100 yellow scotch locks from the ASAP Electrical components range. These scotch locks are a fast and simple way to make an electrical connection between 2 wires, by fastening with pliers and then closing the top cover. Scotch locks are useful for making many different connections including inline connections, tap connections, double run connections and pigtail connections. These yellow scotch lock connectors are suitable for use with 4mm²-6mm² main cables and 3mm²-4.5mm² tap cables. Specifications Size Main Cable Size: 4mm² to 6mm², Tap Cable Size: 3mm² to 4.5mm² Brand ASAP Electrical Colour Yellow ..

(11)

62.28€ 61.66€ Ex Tax: 61.66€

VTE Red 240A Power Distribution Busbar Kit (1 x 1/4" Post)

VTE Red 240A Power Distribution Busbar Kit (1 x 1/4" Post) Power Distribution busbar features 12 x 4mm 15amp screw connection points and 1 x 1/4" post. Made from stainless posts, screws and hex nuts with nickel plated brass base connection plate. Busbar has a glass filled black nylon base and black plastic cover. This busbar is supplied with a red cover and insulation boot to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 240A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand VTE ..

(10)

62.03€ 61.41€ Ex Tax: 61.41€

VTE Black 240A Power Distribution Busbar Kit (1 x 1/4" Post)

VTE Black 240A Power Distribution Busbar Kit (1 x 1/4" Post) Power Distribution busbar features 12 x 4mm 15amp screw connection points and 1 x 1/4" post. Made from stainless posts, screws and hex nuts with nickel plated brass base connection plate. Busbar has a glass filled black nylon base and black plastic cover. This busbar is supplied with a black cover and insulation boot to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 240A Approvals Meets ISO regulations regarding continuously energised terminals. Voltage Maximum: 48V Brand VTE ..

(11)

60.77€ 60.16€ Ex Tax: 60.16€

VTE Red 210A Power Distribution Busbar (3 x 5/16" / 1 x 1/4" Posts)

VTE Red 210A Power Distribution Busbar (3 x 5/16" / 1 x 1/4" Posts) Max load 210amps. 3 x 5/16" posts and 1 x 1/4" post. Red glass filled base. Ideal for positive circuit applications. Stainless posts and hex nuts. Tinned brass connecting components for maximum performance and reliability. Mounting hole centres 118.4mm. Order cover 729249 to meet ISO standards for protection of continuously energised terminals. Specifications Amps Maximum: 210A Approvals Meets ISO regulations regarding continuously energised terminals. Brand VTE Colour Red Construction ..

(9)

59.66€ 59.06€ Ex Tax: 59.06€

Index Marine Junction Box Kit with Splicer Kit (6 Way / IP67)

Index Marine Junction Box Kit with Splicer Kit (6 Way / IP67) This junction box is water and dust proof up to IP67 ensuring it is suitable for the marine environment, features 2 flexible ports with double-membrane seals and a 6-way connector block. Contains splicer kit. Specifications Height 54mm (2-1/8") Length 94mm Width 64mm Brand Index Marine Connections 6-way connector block through 2 Ports Construction Plastic ..

(11)

58.25€ 57.67€ Ex Tax: 57.67€

Pincer for Electric cable from 0,2 to 6 mm2

Pincer for Electric cable from 0,2 to 6 mm2Multipurpose pincers for wire stripping, crimping and cutting. Working range from 0,2 to 6 mm2. ..

(6)

61.73€ 56.18€ Ex Tax: 56.18€

Victron Busbar with Polycarbonate Cover (150A / 4 Terminals)

Victron Busbar with Polycarbonate Cover (150A / 4 Terminals) Victron Busbars are suitable to be used for high current distribution and at the same time they provide connections for batteries and/or other DC equipment. This Victron Busbar features 4 terminals and has a 150 amp current rating. Each VBB115040020 busbar is supplied with a removable protection cover. Amps 150A Height With Cover: 45mm (1.8"), Terminal: 17mm (0.67") ..

(9)

56.70€ 56.13€ Ex Tax: 56.13€

Waterproof Box for Electrical Connections 8 terminals 300amp

Waterproof Box for Electrical Connections 8 terminals 300ampBusbar with 2 x M10 and 6 x M5 Nickel plated Brass screws and insulated base. Complete with cover and label. ..

(9)

62.04€ 55.84€ Ex Tax: 55.84€

Electrical Connection Bar with Stainless screws 28 Terminals 100 A

Electrical Connection Bar with Stainless screws 28 Terminals 100 ADual isolated base Nylon filled busbar designed for marine use, Chromed Brass bar, Stainless Steel terminals and protective cover. ..

(6)

54.51€ 49.60€ Ex Tax: 49.60€

Electrical Connection Bar with Chromed screws 20 Terminals 120 A

Electrical Connection Bar with Chromed screws 20 Terminals 120 AInsulated base busbar with Chromed Brass terminals. ..

(14)

54.51€ 49.60€ Ex Tax: 49.60€

Index Marine Small Junction Box (6 Way / IP67)

Index Marine Small Junction Box (6 Way / IP67) This junction box is water and dust proof up to IP67 ensuring it is suitable for the marine environment, features 6 flexible ports. Specifications Height 54mm (2-1/8") Length 94mm Width 64mm Brand Index Marine Connections 6-way connector block through 6 Ports Construction Plastic Protection Rating IP67 ..

(10)

48.38€ 47.90€ Ex Tax: 47.90€

Electrical Connection Bar with Brass screws 20 Terminals 120 A

Electrical Connection Bar with Brass screws 20 Terminals 120 ABusbars with Brass screws. Reinforced PBT Polymer insulated base. ..

(3)

52.00€ 47.32€ Ex Tax: 47.32€

VTE 975 Battery Terminal Cover (Red / 20.3mm Diameter Entry / Dual)

VTE 975 Battery Terminal Cover (Red / 20.3mm Diameter Entry / Dual) From the VTE 975 series of battery terminal insulators. This terminal cover, made from PVC, is designed to protect terminal connections from short circuits. The 975 series are designed to look good as well as give protection to your electronics. This battery terminal cover is colour coded red to signal a positive connection. Using this terminal cover allows you to comply with ABYC E-9, USCG 33 Subpart I and ISO 10133 standards. Specifications Approvals Complies With ABYC E-9, USCG 33 Subpart I & ISO 10133 Standards. Height 30mm (1-3/16") Length 65.5mm Width ..

(8)

47.63€ 47.15€ Ex Tax: 47.15€

VTE 975 Battery Terminal Cover (Black / 20.3mm Diameter Entry / Dual)

VTE 975 Battery Terminal Cover (Black / 20.3mm Diameter Entry / Dual) From the VTE 975 series of battery terminal insulators. This terminal cover, made from PVC, is designed to protect terminal connections from short circuits. The 975 series are designed to look good as well as give protection to your electronics. This battery terminal cover is colour coded black to signal a negative connection. Using this terminal cover allows you to comply with ABYC E-9, USCG 33 Subpart I and ISO 10133 standards. Specifications Approvals Complies With ABYC E-9, USCG 33 Subpart I & ISO 10133 Standards. Height 30mm (1-3/16") Length Overall: 65.5mm Width ..

(12)

47.63€ 47.15€ Ex Tax: 47.15€

Electrical Pre Insulated Terminal Assortment Box (120 Pack)

Electrical Pre Insulated Terminal Assortment Box (120 Pack) Electrical assortment box containing a range of pre insulated electrical crimp terminals. There are 8 different varieties of terminal, equalling 120 terminals in total. The following crimp terminals are included: Specifications Brand Electrical Pack Quantity 120 Colour Assorted ..

(10)

43.60€ 43.16€ Ex Tax: 43.16€

Stainless Steel Bus-Bar for Electrical Connections 4 terminals

Stainless Steel Bus-Bar for Electrical Connections 4 terminalsBase connection terminal in ABS, tinned copper distribution bar, pins and nuts in stainless steel. ..

(15)

41.25€ 40.84€ Ex Tax: 40.84€

Blue Scotch Lock for 1.5mm²-2.5mm² Cable (100 Pack)

Blue Scotch Lock for 1.5mm²-2.5mm² Cable (100 Pack) Pack of 100 blue scotch locks from the ASAP Electrical components range. These scotch locks are a fast and simple way to make an electrical connection between 2 wires, by fastening with pliers and then closing the top cover. Scotch locks are useful for making many different connections including inline connections, tap connections, double run connections and pigtail connections. These blue scotch lock connectors are suitable for use with 1.5mm²-2.5mm² main cables and 0.65mm²-2mm² tap cables. Specifications Size Main Cable Size: 1.5mm² to 2.5mm², Tap Cable Size: 0.65mm² to 2mm² Brand ASAP Electrical Colour Blue ..

(13)

40.68€ 40.27€ Ex Tax: 40.27€

Red Scotch Lock for 0.5mm²-1mm² Cable (100 Pack)

Red Scotch Lock for 0.5mm²-1mm² Cable (100 Pack) Pack of 100 red scotch locks from the ASAP Electrical components range. These scotch locks are a fast and simple way to make an electrical connection between 2 wires, by fastening with pliers and then closing the top cover. Scotch locks are useful for making many different connections including inline connections, tap connections, double run connections and pigtail connections. These red scotch lock connectors are suitable for use with 0.5mm²-1mm² main cables and 0.65mm² tap cables. Specifications Size Main Cable Size: 0.5mm² to 1mm², Tap Cable Size: 0.65mm² Brand ASAP Electrical Colour Red Unit ..

(6)

40.50€ 40.10€ Ex Tax: 40.10€

Electrical Connection Bar with Stainless screws 14 Terminals 100 A

Electrical Connection Bar with Stainless screws 14 Terminals 100 AIsolated base Nylon filled busbar designed for marine use, Chromed Brass bar, Stainless Steel terminals and protective cover. ..

(14)

39.88€ 36.29€ Ex Tax: 36.29€

Electrical Yellow Ring Terminal (13mm ID / 50 Pack)

Electrical Yellow Ring Terminal (13mm ID / 50 Pack) This pack of 50 yellow ring crimp terminals is from the Electrical range. The yellow sleeve colour signifies that the terminal will suit conductors between 3mm² and 6mm². These are pre-insulated ring terminals and are made from tinned copper. Specifications Brand Electrical Pack Quantity 50 Colour Yellow Construction Tinned Copper Diameter Ring ID: 13mm Style Description Ring Crimp Terminal ..

(12)

35.50€ 35.14€ Ex Tax: 35.14€

Electrical Connection Bar with Stainless screws 16 Terminals 100 A

Electrical Connection Bar with Stainless screws 16 Terminals 100 ADual isolated base Nylon filled busbar designed for marine use, Chromed Brass bar, Stainless Steel terminals and protective cover. ..

(13)

38.13€ 34.70€ Ex Tax: 34.70€

Cover for 729220 - 729224 Power Distribution Posts / Bus Bars

Cover for 729220 - 729224 Power Distribution Posts / Bus Bars VTE yellow cover for 729220, 729221 and 729224 busbars. Provides insulation protection for the terminals, required to meet ISO standard regarding continuously energised terminal connection. Specifications Approvals ABYC E-9, USCG 33 Subpart I & ISO 10133 specifications. Brand VTE ..

(10)

32.72€ 32.40€ Ex Tax: 32.40€

Electrical White Self-Amalgamating Electrical Tape (25mm x 10m)

Electrical White Self-Amalgamating Electrical Tape (25mm x 10m) This self-amalgamating silicone rubber tape is suitable for electrical insulation, hose and pipe repairs, colour coding, cable or wire bundling and general abrasion protection. The added benefits to the amalgamating process are that is forms a stronger, seamless layer which is waterproof, making it perfect for marine applications. It is also non-flammable and is also used for emergency repair of low pressure pipes and hoses. This amalgamating tape includes an interleaving layer to prevent amalgamation in the roll and can also be used in a wide range of other general applications. Specifications Operating Temperature -40°C to +100°C Width 25mm Brand ..

(9)

32.18€ 31.86€ Ex Tax: 31.86€