Galvanic Isolators

Galvanic Isolators

Galvanic Isolators

Show:
Sort By:

Victron Electric Isolation Transformer (7000W)

Victron Electric Isolation Transformer (7000W) The Victron isolation transformer is essential for preventing electrolytic corrosion and to guarantee a safe electrical system on board boats. It eliminates electrical continuity between AC shore power and the boat and eliminates the need for galvanic isolators and polarity alarms. When using shore power, if the ground wire from the shore supply is connected to a metal part of the boat, galvanic corrosion will occur. This can attack important areas such as the propeller and shaft, as well as quickly dissolving anodes that are there to protect them. Not connecting the ground wire is not a viable work around for this, as this would mean fuses and Ground Fault Circuit Interrupters (GFCIs) will not work in case of an electrical fault. This isolation transformer was designed to combat these issues and allow a safe shore power connection that is not harmful to your boat. S..

(5)

1,850.00€ 1,831.50€ Ex Tax: 1,831.50€

Victron Electric Isolation Transformer (3600W)

Victron Electric Isolation Transformer (3600W) The Victron isolation transformer is essential for preventing electrolytic corrosion and to guarantee a safe electrical system on board boats. It eliminates electrical continuity between AC shore power and the boat and eliminates the need for galvanic isolators and polarity alarms. When using shore power, if the ground wire from the shore supply is connected to a metal part of the boat, galvanic corrosion will occur. This can attack important areas such as the propeller and shaft, as well as quickly dissolving anodes that are there to protect them. Not connecting the ground wire is not a viable work around for this, as this would mean fuses and Ground Fault Circuit Interrupters (GFCIs) will not work in case of an electrical fault. This isolation transformer was designed to combat these issues and allow a safe shore power connection that is not harmful to your boat. S..

(9)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Victron Electric Isolation Transformer (2000W)

Victron Electric Isolation Transformer (2000W) The Victron isolation transformer is essential for preventing electrolytic corrosion and to guarantee a safe electrical system on board boats. It eliminates electrical continuity between AC shore power and the boat and eliminates the need for galvanic isolators and polarity alarms. When using shore power, if the ground wire from the shore supply is connected to a metal part of the boat, galvanic corrosion will occur. This can attack important areas such as the propeller and shaft, as well as quickly dissolving anodes that are there to protect them. Not connecting the ground wire is not a viable work around for this, as this would mean fuses and Ground Fault Circuit Interrupters (GFCIs) will not work in case of an electrical fault. This isolation transformer was designed to combat these issues and allow a safe shore power connection that is not harmful to your boat..

(9)

950.00€ 940.50€ Ex Tax: 940.50€

Index Marine IM2160 Galvanic Isolator (16 Amps)

Index Marine IM2160 Galvanic Isolator (16 Amps) This Index Marine galvanic isolation blocker eliminates the potential difference between boats and the shore, preventing galvanic action caused by the different metals used. The IM2160A16 galvanic isolator electrolysis blocker is rated for a maximum current of 16 amps. Unit Classification: 16A Shore Inlet Compatibility: Single: 15, 16A Dual: 15,16A 120/240Vac: 120/240V AC AC Frequency: 50/60Hz Max. Continuous Current: 35A Max. Surge Current: 400A Operating Temperature Range: -55°C to 150°C Weight: 592g Installation Instructions: 1 - Mounting the isolator: The IM2160 galvanic isolator unit should be mounted using the screws provided and located in a position that will not be subjected to excessive heat (e.g. close to the engine or exhaust system). It should also be positioned as close as possible to the shore power connector; the point at which the mains electricity supply enters the vessel. 2 - Dis..

(11)

117.59€ 116.41€ Ex Tax: 116.41€

Index Marine Electrical Status/Fault Indicator 2200

Index Marine Electrical Status/Fault Indicator 2200 The Index Marine 2200 electrical status/fault indicator utilises the galvanic isolator as a current flow sensor, detecting current flow and voltage drop across the device’s terminals. The galvanic isolation status indicator should be mounted in a prominent position on the boat so that crew and users are immediately alerted to electrical faults that could be hazardous to those on board the vessel, and/or cause an increase in galvanic corrosion. Passive Detection - The electrical fault indicator has no power consumption under normal conditions. It only receives power when there is current flowing through the galvanic isolator, and then it accurately indicates a fault in the vessel (or shore power) electrical system. The 2200 provides an LED light panel to monitor problems with the vessel earthing system and any AC or DC fault conditions. If there is a fault alert you should shut down electrics imm..

(8)

50.49€ 49.99€ Ex Tax: 49.99€