Hydraulic Steering

Hydraulic Steering

Hydraulic Steering

Show:
Sort By:

Hydraulic Cylinder Vetus MT345 Professional

Hydraulic Cylinder Vetus MT345 ProfessionalProfessional hydraulic steering systems...

(13)

1,786.97€ 1,715.49€ Ex Tax: 1,715.49€

Professional hydraulic Steering Cylinder Vetus MT230

Professional hydraulic Steering Cylinder Vetus MT230Professional hydraulic steering systems. This cylinder has a base plate with a universal joint and swiveling rod end, so that alignment mistakes can be absorbed. Bleed nipples also included. Vetus Part no. MT230 to MT1200 Supplied with fittings for hoses 18mm Piston rod is stainless shaft the cylinder is mounted on a base plate with universal joint so that alignment mistakes can be absorbed. Both for single and for dual steering, a non return valve is available (complete with all fittings): a single non-return valve, complete with by-pass(HS74), or a dual non-return valve (HS81) . Also a pressure relief valve complete with fittings can be supplied (HS42) The commercial range of helm pumps & cylinders are interchangeable...

(15)

1,662.31€ 1,595.81€ Ex Tax: 1,595.81€

Hydraulic Steering Mavi Mare Gf350hd for 1 or 2 Outboards up to 700hp (Mavi.mare)

Hydraulic Steering Mavi Mare Gf350hd for 1 or 2 Outboards up to 700hp (Mavi.mare)Reinforced steering with lateral mounting hoses. Kit composed of: GM2-MRA01 pump + MC350HD cylinder + brass fittings (1 kit GTN7x10916+ 1 Kit AC38/T916 )+ 2 lt. oil hydraulic + 15 mt (2 x 7,5) SAE100 R7 5/16 hose. Turns hd to hd 5,2. Up to 350 hp or a couple of 350 hp (700 hp) engine with counter rotating propellers. All the system an not intended for racing boat. Steering system kit supplied with 2 hoses of mt 7,50 each ,with fittings pressed on one end.On request is possible to supply the hoses with desiredlength , completely fitted. Cylinder technical features: Frontal mounting balanced cylinder “bullhorn” type, cylinder heavy duty...

(10)

902.83€ 866.72€ Ex Tax: 866.72€

Hydraulic steering Ultraflex Nautech 2 up to 300hp

Hydraulic steering Ultraflex Nautech 2 up to 300hpNautech2 steering system kit for outboards:  Evinrude 2ST from 75 to 300 HP - Yamaha 2ST from 75 to 300 HP and 4ST from F200 to F250 (..

(4)

863.41€ 828.88€ Ex Tax: 828.88€

Hydraulic steering Ultraflex Nautech 1 up to 300hp

Hydraulic steering Ultraflex Nautech 1 up to 300hpNautech1 steering system kit for outboards:  Mercury 2 and 4ST from 100 to 300 HP - Yamaha 4ST from F70 to F150 and from F200 a F300 - Honda 4ST 75/90/115A and from 135 to 250 HP - Suzuki 4ST from 100 to 175 HP - Tohatsu 4ST form 70 to 115 HP - Selva 2ST from 80 to 150 and 4ST 150 HP - Johnson 4ST from 90 to 140 HP.  Practical and easy to install, includes:  1 UP28F Pump (Cod MTM 4656601), 4.3 wheel turns  1 UC128-OBF/1 cylinder (Cod MTM 4655014)  2 Liters Ultraflex hydraulic oil.  Thru-bulkheads are used for passing the 2 hydraulic hoses on the transom. To be completed with 2 hydraulic hoses kit.  ..

(9)

863.41€ 828.88€ Ex Tax: 828.88€

Hydraulic Steering Navi Mare GF300BT for Outboards up to 300hp (Mavi.mare)

Hydraulic Steering Navi Mare GF300BT for Outboards up to 300hp (Mavi.mare)Kit GF300BT universal for all engines, including: - Pump-GM2 MRA01 front-mounting, with non-return valve and pressure relief. Possibility of using semi mount square flange included. Pistons 7 Volume 27 cm3 Max 60 bar Weight 5.5 kg. - Cylinder MC300BHD, Volume 130 cm3 Stroke 198 mm - Hydraulic Oil 2 lt, 2 tubes R7 5 / 16 lung. mt. 7.50, connected by only one side + 2 connectors for stranded perform the desired length...

(14)

855.19€ 820.98€ Ex Tax: 820.98€

Bubble Buster Ultraflex (Ultraflex)

Bubble Buster Ultraflex (Ultraflex)Portable automated equipment for filling and bleeding of hydraulic systems contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. Possible to connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of:- unit equipped with a safety valve, switch, 5 liter tank and electric motor 12V 8A.- electric cable mt. 4 full clips for connecting to the battery.- Double Spiral hose mt. 6 for connection to the pump- Spiral tube mt. 6 for connection to the cylinder...

(5)

828.19€ 795.06€ Ex Tax: 795.06€

Hydraulic Steering Ultraflex Hyco OBF-3 for Outboards up to 150hp (Ultraflex)

Hydraulic Steering Ultraflex Hyco OBF-3 for Outboards up to 150hp (Ultraflex)Hydraulic Steering system supplied without pipes for outboards up to 150hp, Ultraflex Hyco-OBF / 3 Hydraulic Steering For Outboard Max 150hp balanced center mount cylinder The Kit Includes: One UP20F Pump • Equipped with a non-return valve that prevents reversibility • Integrated overpressure protection valve • 3/4 ”tapered shaft in stainless steel • Tank in corrosion resistant composite material • Non-return valve and shaft seal easily accessible in case of replacement • Complete with 90 ° adjustable fittings for 3/8 "(9.5 mm) hose UC94-OBF / 3 Cylinderinder Balanced: equal number of revolutions from half-stroke to full-stroke Adjustable fittings for ease of installation High-strength stainless steel (ULTRABOLT) connecting bolt The fixing rod is divided into 2 parts and pivoted for easier and more comfortable installation and is equipped with anti-lock bushings that prevent friction with th..

(15)

798.00€ 766.08€ Ex Tax: 766.08€

Hydraulic Steering Ultraflex Hyco OBF-1 for 1 Outboard up to 150hp (Ultraflex)

Hydraulic Steering Ultraflex Hyco OBF-1 for 1 Outboard up to 150hp (Ultraflex)Hydraulic Steering system supplied without pipes for outboards up to 150hp, includes: front mounted UP20F pump, UC94-OBF cylinder / 1 straight arm, 2l. Hydraulic oil. Flying band-to-band revolutions n ° 4,7 Ultraflex Hyco-OBF Hydraulic Boxed Steering System for Outboards - Hydraulic steering offers extremely smooth, precise and effortless control thus reducing driver fatigue and also improving boat control. This boxed kit is designed for use with most outboards up to 150Hp and gives you everything you need to upgrade your mechanical system to hydraulic. • 4.7 wheel turns lock to lock HELM FEATURES: • Standard 3/4” tapered stainless steel shaft that fits most steering wheels (wheel not included) • Corrosion proof composite housing • Front mounting • Integral relief valve for over-pressure protection • Built-in lock valve for positive rudder lock • Easily accessible lock valve & shaft seal • Includes 90deg ..

(13)

788.86€ 757.31€ Ex Tax: 757.31€

Hydraulic Steering Kit Ultraflex Hytech 2 up to 175hp

Hydraulic Steering Kit Ultraflex Hytech 2 up to 175hpPractical and easy to install Hytech1 steering system kit for all outboards up to 175HP total which includes:   1 UP20F Pump (Cod MTM 4655002)    2 Liters Ultraflex hydraulic oil    1 UC95-OBF/1 Cylinder (Cod MTM 4655010)    To be completed with 2 hydraulic hoses kit.    Practical and easy to install Hytech2 steering system kit only for Mercury Optimax 75/90/115 and Honda BF115D/BF130A outboards, which includes:    1 UP20F Pump (Cod MTM 4655002)    2 Liters Ultraflex hydraulic oil    1 UC95-OBF/3 Cylinder (Cod MTM 4655009)     To be completed with 2 hydraulic hoses kit. ..

(10)

721.74€ 692.87€ Ex Tax: 692.87€

Hydraulic Steering Kit Ultraflex Hytech 1 up to 175hp

Hydraulic Steering Kit Ultraflex Hytech 1 up to 175hpPractical and easy to install Hytech1 steering system kit for all outboards up to 175HP total which includes:   1 UP20F Pump (Cod MTM 4655002)    2 Liters Ultraflex hydraulic oil    1 UC95-OBF/1 Cylinder (Cod MTM 4655010)    To be completed with 2 hydraulic hoses kit.    Practical and easy to install Hytech2 steering system kit only for Mercury Optimax 75/90/115 and Honda BF115D/BF130A outboards, which includes:    1 UP20F Pump (Cod MTM 4655002)    2 Liters Ultraflex hydraulic oil    1 UC95-OBF/3 Cylinder (Cod MTM 4655009)     To be completed with 2 hydraulic hoses kit.    ..

(6)

701.50€ 673.44€ Ex Tax: 673.44€

Hydraulic Steering Ultraflex Gotech OBF for 1 Outboard up to 115hp (Ultraflex)

Hydraulic Steering Ultraflex Gotech OBF for 1 Outboard up to 115hp (Ultraflex)Kit Gotech OBF or outboard single engine up to 115 HP. package kit contains: UP18 Intermediate helm pump UC81-OBF Front mount outboard cylinder OL 150 Hydraulic oil - 2 litres KIT OB-GT/M Hose kit diameter, 1/4” 6 m (19.7”) length Hoses not included Applications: Mercury Mariner Outboard: 5-75-90 2T from 1190 to 2008 - 115EGFI 2T from 1990 to 2007 - 75-90-115 Optimax 2T e 40-50-60 EFI 4T from 2004 to date - 75-80-90 EFI 4T from 2000 to date - 100-115 EFI 4T from 2007 to date. Yamaha Outboard: 60-70 2T from 1984 to 2008 - 75C 90 115C 2T from 1998 to 2008 - F40G F70 4T from 2010 to date - F30 F40 F60 F75 F80 F90 F100 F115 EFI 4T from 1999 to 2007 - F80 F 100 4T from 2000 to date F115 from 2004 to date - F40D F50F F60C EFI 4T. Evinrude Outboard: E40 E50 E55 E60 2T E75 E90 2T from 2004 to date - E115 2T V4 from 1995 to date. Honda Outboard: BF40 50 60 75 90 4T from 1995 to date - BF115D from 1998 to 2009 - BF11..

(11)

648.15€ 622.22€ Ex Tax: 622.22€

Hydraulic Steering Cylinder Ultraflex UC130 - SVS/2

Hydraulic Steering Cylinder Ultraflex UC130 - SVS/2Balanced steering cylinder with compact design to allow installation in even the smallest engine shafts Features: - Volume: 120cc- Force: 450kg- Int. Ø: 35mm- Stroke: 185mm- Fittings: 3/8`.; High perfomance SilverSteer steering system for more than 300 HP outboards. The motor connection is made of high-strenght Stainless-Steel (Ultrabolt). Composed by separated sold pieces: 1 UP28F-SVS Pump (Cod MTM 4655501) with 4.6 flying laps or 1 UP33F-SVS Pump (Cod MTM 4655502) with 3.9 flying laps. The pumps are complete with non-return valve and overpressure protection valve. 1 UC130/1-SVS Cylinder (Cod MTM 4655511) or 1 UC130/2-SVS Cylinder (Cod MTM 4655512); 1 Hose Kit OB-SVS; 2 Lt Hydraulic oil. The two cylinders are different in the motor connection: - UC130/1 (Cod MTM 4655511) is made for: Mercury 2 e 4T from 135 to 300 HP - Yamaha 4T from 150 to 350 HP - Honda 4T from 150 to 250 HP - Suzuki 4T from 100 to 175 HP; ..

(15)

639.09€ 613.53€ Ex Tax: 613.53€

Hydraulic Steering Cylinder Ultraflex UC130 - SVS/1

Hydraulic Steering Cylinder Ultraflex UC130 - SVS/1Specially designed for high performance, high torque applications the SilverSteer™ UC130-SVS cylinder is recommended for bass boats, flat boats and tournament fishing boats. The UC130-SVS is built to last with heavy duty stainless steel cylinder rod, seals and link assemblies. Constructed of top grade materials this cylinder is simple to install and fits almost every 2 and 4 stroke outboard engine in the market. See the application guide next page to choose the appropriate cylinder (UC130-SVS/1, UC130-SVS/2 or UC130-SVS/3) for your application. High perfomance SilverSteer steering system for more than 300 HP outboards. The motor connection is made of high-strenght Stainless-Steel (Ultrabolt). Composed by separated sold pieces: 1 UP28F-SVS Pump (Cod MTM 4655501) with 4.6 flying laps or 1 UP33F-SVS Pump (Cod MTM 4655502) with 3.9 flying laps. The pumps are complete with non-return valve and overpressure protection valve. ..

(8)

639.09€ 613.53€ Ex Tax: 613.53€

Hydraulic Steering pump Ultraflex Up39r (Ultraflex)

Hydraulic Steering pump Ultraflex Up39r (Ultraflex)Rear mounting helm pump, compact structure, axial piston system, non-return valve that prevents reversibility, overpressure protection valve, 3/4 stainless steel tapered spindle, cast iron rotor for longer life, front oil filling, complete with 90 ° adjustable fittings for 3/8 pipe. Weight kg.5. White hub cap..

(15)

637.91€ 612.39€ Ex Tax: 612.39€

Hydraulic Cylinder Ultraflex uc378-i for Inboard Steering (Ultraflex)

Hydraulic Cylinder Ultraflex uc378-i for Inboard Steering (Ultraflex)Inboard engines brass cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa)..

(6)

625.08€ 600.08€ Ex Tax: 600.08€

Hydraulic Steering package Vetus MTC 30 Kit for Boats from 5 to 7mt (Vetus Bv)

Hydraulic Steering package Vetus MTC 30 Kit for Boats from 5 to 7mt (Vetus Bv)KIT for boats of 5-7 m. it contain:1 Pump HTP2010, 1 cylinder MTC3008, 15m hydraulic hose HS04N, 1 lt steering oil..

(15)

614.60€ 590.02€ Ex Tax: 590.02€

Hydraulic Steering pump Ultraflex UP33F-SVS

Hydraulic Steering pump Ultraflex UP33F-SVSHigh perfomance SilverSteer steering system for more than 300 HP outboards. The engine connection is made of high-strength Stainless-Steel (Ultrabolt). Composed by separated sold pieces: Front mount helm pump with a displacement of 33 cc per revolution, specifically designed for high torque applications. Built-in lock valve for positive rudder lock. Integral relief valve for over-pressure protection 105bar. With adjustable at 45º fittings 1/4` NPT for 3/8` tube. 3/4` tapered stainless steel shaft. Maximum wheel diameter: 710mm. This helm is always to be installed in conjunction with the UC128-SVS cylinders and OB-SVS hoses...

(14)

597.18€ 573.29€ Ex Tax: 573.29€

Hydraulic Steering Pump Ultraflex Up33r (Ultraflex)

Hydraulic Steering Pump Ultraflex Up33r (Ultraflex)Rear mounting helm pump, compact structure, axial piston system, non-return valve that prevents reversibility, overpressure protection valve, 3/4 stainless steel tapered spindle, cast iron rotor for longer life, front oil filling, complete with 90 ° adjustable fittings for 3/8 pipe. Weight kg.5. White hub cap..

(4)

589.99€ 566.39€ Ex Tax: 566.39€

Hydraulic pump Ultraflex Up28r (Ultraflex)

Hydraulic pump Ultraflex Up28r (Ultraflex)Rear mounting helm pump, compact structure, axial piston system, non-return valve that prevents reversibility, overpressure protection valve, 3/4 stainless steel tapered spindle, cast iron rotor for longer life, front oil filling, complete with 90 ° adjustable fittings for 3/8 pipe. Weight kg.5. White hub cap This rear mount helm pump has 1.7 cubic inches / 28cc of displacement, with a 3/4" tapered shaft. Relief valve pressure is 1000 PSI max, per manufacturer. Has 1/4" NPT fitting for 3/8" tube. Maximum wheel diameter is 28". Features: Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron cylinder rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Drop in replacement for Teleflex Seastar helms..

(15)

565.52€ 542.90€ Ex Tax: 542.90€

Hydraulic Steering Pump Ultraflex up39f (Ultraflex)

Hydraulic Steering Pump Ultraflex up39f (Ultraflex)Front mount helm pumps. Compact, axial pistons. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4” tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4” NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position. The pumps SilverSteer SVS have been designed specifically for applications with high torques such as: bass boats, flat-bottomed boats and boats with a low power/weight ratio. With a safety valve set at 105 Bar (1500 psi) pumps, the SVS provide a guide very precise at all speeds. The pumps SVS should be used only with the cylinder UC130-SVS Kit OB-SVS Series SilverSteer, which are built for applications with high torques of the steering. The version of the front-mount is compatible with the template of some competitors. Both the pump mounting front mount with tilt have lalberino stainless steel fittings a..

(12)

564.52€ 541.94€ Ex Tax: 541.94€

Hydraulic Steering Cylinder Ultraflex uc128 obf/2 (Ultraflex)

Hydraulic Steering Cylinder Ultraflex uc128 obf/2 (Ultraflex)Front mount cylinder, balanced ( the number of turns lock-to-lock isequal port to starboardor vice-versa). Shaped side arm. Cylinder Steering System Hydraulic ULTRAFLEX UC128-OBF/2 For Outboard 39966R..

(11)

532.55€ 511.24€ Ex Tax: 511.24€

Hydraulic Steering Cylinder Ultraflex uc128 obf/1 (Ultraflex)

Hydraulic Steering Cylinder Ultraflex uc128 obf/1 (Ultraflex)Cylinder Steering System Hydraulic ULTRAFLEX UC128-OBF/1 For Outboard 39423Z Front mount cylinder, balanced ( the number of turns lock-to-lock isequal port to starboardor vice-versa). Straight side arm. Front Mount Steering Cylinder Ultraflex uc128 obf/1..

(9)

532.55€ 511.24€ Ex Tax: 511.24€

Hydraulic Steering Pump Ultraflex UP33F (Ultraflex)

Hydraulic Steering Pump Ultraflex UP33F (Ultraflex)Ultraflex UP33F helm pump. Front mount helm pumps. Compact, axial pistons. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4” tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4” NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position. Hydraulic pump with cast iron rotor for ship control with built-in throttle lock valve and overpressure relief valve. It has a 3/4 ``stainless steel cone shaft and a corrosion-resistant composite package as well as an easily accessible valve and shaft sealing - for easy replacement. It has 90 ° outputs for a 3/8`` hose. Front mounting, single displacement - 33 cm3, overpressure valve adjustment - 70 bar, weight - 5 kg, max. engine power - 450 HP. The UP33 steering pump is fitted with a mounted check valve, this reduces recoil by the engine in the hydraulic system. Also, the ..

(8)

521.93€ 501.05€ Ex Tax: 501.05€

Cylinder Vetus MTC 175 (Vetus Bv)

Cylinder Vetus MTC 175 (Vetus Bv)High quality brass bodied hydraulic cylinder for larger yachts and work boats. Supplied with zinc plated rod end (stainless steel upgrade available) and compression fittings with bleed nipples. Wheel Turns (lock to lock with HTP pump models) HTP42: 8.5 Dimensions Stroke: 225mm Volume: 356cm³ Length of tiller arm: 196mm Rod End Thread: M20 Weight: 8Kg Technical details: Max. Torque: 1717 Nm (175 kgm) (1266 ft.lbs) Torque at 35° and 56 kg/cm²: 1373 Nm (140 kgm) (1013 ft.lbs) Pressure 5492 kPa (56 kg/cm²) (797 lbs/sq.inch). Connections: G¼ female pipe thread. Total rudder angle: 70° (2 x 35°)...

(5)

505.31€ 485.09€ Ex Tax: 485.09€

Hydraulic Steering Navi Mare for Outboards Yamaha 40-50-60hp

Hydraulic Steering Navi Mare for Outboards Yamaha 40-50-60hpKit GF90BT for Yamaha engines 40/50/60 HP, includes: - Pump GM3-MRA mounting, with non-return valve and pressure relief. Can be mounted semi-recessed with square flange included: Pistons 7, Volume 14 cm3, max pressure 50 bar - Cylinder MC90B, volume 75 cm3, 100 mm stroke, rod Ø mm. 12 - Hydraulic oil 1 lt, 2 tubes R7 5/16 length. mt. 5.00, connected by only one side + 2 fittings recoverable to perform the desired length...

(4)

503.69€ 483.55€ Ex Tax: 483.55€

Hydraulic Steering Navi Mare for Outboards up to 80 HP

Hydraulic Steering Navi Mare for Outboards up to 80 HPKit GF90BT universalfor all engines up to 80 HP, includes: - Pump GM3-MRA mounting, with non-return valve and pressure relief. Can be mounted semi-recessedwith square flange included: Pistons 7, Volume 14 cm3, max pressure 50 bar - Cylinder MC90B, volume 75 cm3, 100 mm stroke,rod Ø mm. 12 - Hydraulic oil 1 lt, 2 tubes R7 5/16 length. mt. 5.00, connected by only one side + 2 fittings recoverable to perform the desiredlength...

(3)

503.69€ 483.55€ Ex Tax: 483.55€

Hydraulic Cylinder Ultraflex uc293-i (Ultraflex)

Hydraulic Cylinder Ultraflex uc293-i (Ultraflex)For inboard engines. Balanced: the number of turns lock-to-lock is equal port to starboard or vice-versa. Maximum rudder torque 146.5 kgm (12816 lbs. in). The UC293-I cylinders are recommended for use with UP39 series helms and pre-assembled hoses (Kit OB and Kit OB/R5). Nylon tubing 3/8" 84101 can be used as an alternative to the standard KIT-OB hose kit for plumbing the system. For these applications the fitting kit for the additional station is 84112 - KIT95-2S...

(15)

501.29€ 481.24€ Ex Tax: 481.24€

Hydraulic pump Ultraflex up28f

Hydraulic pump Ultraflex up28fFront mount helm pumps. Compact, axial pistons. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4” tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4” NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position...

(11)

481.06€ 461.81€ Ex Tax: 461.81€

Hydraulic Steering Cylinder Ultraflex uc94 obf/1 (Ultraflex)

Hydraulic Steering Cylinder Ultraflex uc94 obf/1 (Ultraflex)Front mount cylinder balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa). Straigh arm..

(7)

478.24€ 459.11€ Ex Tax: 459.11€

Hydraulic pump up25f Ultraflex

Hydraulic pump up25f UltraflexCompact, axial pistons. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4” tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4” NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position...

(4)

470.97€ 452.14€ Ex Tax: 452.14€

Vetus Steering Cylinder MTC 125

Vetus Steering Cylinder MTC 125Cylinder MTC 125 for boats of 12-15 m...

(4)

445.76€ 427.93€ Ex Tax: 427.93€

Steering Hydraulic Pump Ultraflex UP20F

Steering Hydraulic Pump Ultraflex UP20FFront mounting. Lock valve to avoid rudder feedback to the helm. Relief valve for over-pressure protection. 3/ 4” tapered shaft. Composite material tank, corrosion resistant. Complete with elbow fittings. Possible flush mounting with flange X64. Weight 3,6 kg...

(3)

428.89€ 411.74€ Ex Tax: 411.74€

Hydraulic Steering Cylinder Ultraflex uc168-i (Ultraflex)

Hydraulic Steering Cylinder Ultraflex uc168-i (Ultraflex)Aluminium cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa)...

(13)

418.36€ 401.63€ Ex Tax: 401.63€

Hydraulic Steering Pump Vetus HTP 42

Hydraulic Steering Pump Vetus HTP 42Hydraulic steeringsfor inboard motor. Built with corrosion free material, for boats of 12-17 m...

(6)

408.74€ 392.39€ Ex Tax: 392.39€

Vetus MTC 72 Hydraulic Steering Cylinder (Vetus Bv)

Vetus MTC 72 Hydraulic Steering Cylinder (Vetus Bv)Cylinder MTC 72 for boats of 7-12 m...

(3)

399.77€ 383.78€ Ex Tax: 383.78€

Hydraulic Steering Pump Vetus HTP 30

Hydraulic Steering Pump Vetus HTP 30Hydraulic steeringsfor inboard motor. Built with corrosion free material, for boats of 6-12 m...

(11)

366.09€ 351.45€ Ex Tax: 351.45€

Hydraulic Steering Pump Vetus HTP 20 (Vetus Bv)

Hydraulic Steering Pump Vetus HTP 20 (Vetus Bv)Hydraulic steeringsfor inboard motor. Built with corrosion free material, for boats of 5-7 m...

(10)

355.00€ 340.80€ Ex Tax: 340.80€

Hydraulic Steering Cylinder Vetus MTC 52 (Vetus Bv)

Hydraulic Steering Cylinder Vetus MTC 52 (Vetus Bv)Cylinder MTC 52 for boats of 6-10 m...

(10)

350.79€ 336.76€ Ex Tax: 336.76€

Hydraulic Steering Cylinder Ultraflex uc132 obs (Ultraflex)

Hydraulic Steering Cylinder Ultraflex uc132 obs (Ultraflex)Side mount cylinder not balanced (the number of turns lock-to-lock is not equal port to starboard), supplied with swivelling nut for mounting on the engine...

(6)

336.55€ 323.09€ Ex Tax: 323.09€

Hydraulic Steering Pump Ultraflex UP18

Hydraulic Steering Pump Ultraflex UP18Built-in lock valve for positive rudder lock. Integral relief valve for over-pressure protection. 3/4” tapered anodized aluminum shaft. Corrosion proof composite housing. Easy accessibile lock valve and shaft seal for replacement. For use with UC81-OBF cylinder only. Intermediate dashboard position mount...

(10)

331.16€ 317.92€ Ex Tax: 317.92€

Hydraulic Steering Cylinder Ultraflex uc68 obs

Hydraulic Steering Cylinder Ultraflex uc68 obsSide mount cylinder not balanced (the turns lock-to-lock is not equal port to starboard). Supplied with a swivelling nut for fast mounting on the engine...

(6)

330.93€ 317.70€ Ex Tax: 317.70€

Hydraulic Steering Cylinder Vetus MTC 30

Hydraulic Steering Cylinder Vetus MTC 30Cylinder MTC 30 for boats of 5-7 m...

(4)

328.15€ 315.02€ Ex Tax: 315.02€

Hydraulic Steering Cylinder Ultraflex Uc81-obf

Hydraulic Steering Cylinder Ultraflex Uc81-obfOBF front mount cylinder, balanced: the number of turns lock-to-lock is equal port to starboard and vice-versa. Depending on the applications on the outboard engine, the UC81-OBF can be installed port or starboard...

(8)

320.99€ 308.15€ Ex Tax: 308.15€

Hydraulic Steering Cylinder Ultraflex uc116-i (Ultraflex)

Hydraulic Steering Cylinder Ultraflex uc116-i (Ultraflex)Aluminium cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa)...

(13)

301.91€ 289.83€ Ex Tax: 289.83€

Ultraflex uc69-i balanced cylinder (Ultraflex)

Ultraflex uc69-i balanced cylinder (Ultraflex)The number of turns lock-to lock is equal port to starboard or vice-versa...

(5)

282.18€ 270.89€ Ex Tax: 270.89€

Vetus HS210 Rod End for Vetus MTC125 to MTC175 Steering Rams

Vetus HS210 Rod End for Vetus MTC125 to MTC175 Steering Rams The Vetus HS210 steering rod end is suitable for use with the MTC125 to MTC175 steering rams such as the Vetus MTC125-1. The steering ram rod end features a M20 x 15 thread is has a stainless steel 316 construction. Brand Vetus Model HS210 Spares and Accessories Ram Rod End ..

(8)

199.52€ Ex Tax: 199.52€

Vetus Seal Kit for Hydraulic Steering Ram MTC52 & MTC72

Vetus Seal Kit for Hydraulic Steering Ram MTC52 & MTC72 Vetus Part Number: HS863 The Vetus seal kit is suitable for the Vetus MTC52 and Vetus MTC72 hydraulic marine steering cylinders. Brand Vetus Model HS863 Spares and Accessories Seal kit ..

(13)

66.93€ Ex Tax: 66.93€

Vetus Seal Kit for Hydraulic Steering Ram MTC45

Vetus Seal Kit for Hydraulic Steering Ram MTC45 Vetus Part Number: HS821 The Vetus seal kit is suitable for the Vetus MTC45 hydraulic marine steering cylinder. Brand Vetus Model HS821 Spares and Accessories Seal kit ..

(8)

59.15€ Ex Tax: 59.15€

Vetus Rod End for MTC52 & 72 Steering Rams

Vetus Rod End for MTC52 & 72 Steering Rams This Vetus rod end is suitable for the Vetus MTC52 and Vetus MTC72 hydraulic steering rams. This Rod End has an M12 thread and the diameter of the hole in the ball joint is 12mm. Brand Vetus Model HS879 Spares and Accessories Ram Rod End ..

(14)

46.29€ Ex Tax: 46.29€

Vetus Oil Seal Set & Gasket for Steering Pumps (HTP, HTPR, HTPT & HTPRT)

Vetus Oil Seal Set & Gasket for Steering Pumps (HTP, HTPR, HTPT & HTPRT) Vetus oil seal set and gasket suitable for use with the following Vetus steering pumps; HTP, HTPR, HTPT and HTPRT. Brand Vetus Contents Oil Seal Set & Gasket Suitability HTP, HTPR, HTPT & HTPRT Steering Pumps ..

(15)

42.41€ Ex Tax: 42.41€

Vetus Seal Kit for Hydraulic Steering Ram MTC30

Vetus Seal Kit for Hydraulic Steering Ram MTC30 This Vetus HS820 seal and gasket kit is suitable to completely overhaul the Vetus MTC30 and Vetus MTC3008 hydraulic steering rams (hydraulic cylinders). Brand Vetus Model HS820 Spares and Accessories Seal kit ..

(10)

39.90€ Ex Tax: 39.90€

Vetus Mounting Base for MTC30 Hydraulic Steering Ram

Vetus Mounting Base for MTC30 Hydraulic Steering Ram This Vetus mounting base / trunion is suitable for the Vetus MTC30 hydraulic steering arm. The HS130 mounting base is supplied with 2 screws. Brand Vetus Model HS130 Spares and Accessories Ram Mounting Base ..

(4)

31.35€ Ex Tax: 31.35€

Vetus Gasket & Seal Kit for MT30 - MT140 Hydraulic Steering Helm Pumps

Vetus Gasket & Seal Kit for MT30 - MT140 Hydraulic Steering Helm Pumps This Vetus HS37N gasket and seal kit is suitable for Vetus MT30 to MT140 hydraulic steering helm pumps. Brand Vetus Model HS37N Replaces Vetus Seal V-HS801 ..

(5)

20.13€ Ex Tax: 20.13€

Vetus Rod End for MTC30 Steering Rams

Vetus Rod End for MTC30 Steering Rams The Vetus HS840 steering rod end is suitable for use with the MTC30 steering rams such as the Vetus MTC3008. Brand Vetus Model HS840 Spares and Accessories Ram Rod End ..

(12)

17.10€ Ex Tax: 17.10€