Engine Mounts

Engine Mounts

Engine Mounts

Show:
Sort By:

Engine Shock Absorber-Marine Engine Mounts L M20 800KG

Engine Shock Absorber-Marine Engine Mounts L M20 800KGFlexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..

(11)

164.31€ 157.74€ Ex Tax: 157.74€

Engine Shock Absorber-Marine Engine Mounts L M20 600KG

Engine Shock Absorber-Marine Engine Mounts L M20 600KGFlexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..

(7)

154.01€ 147.85€ Ex Tax: 147.85€

Engine Shock Absorber-Marine Engine Mounts L M20 400KG

Engine Shock Absorber-Marine Engine Mounts L M20 400KGFlexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..

(4)

152.97€ 146.85€ Ex Tax: 146.85€

Galvanized Steel Engines Support 230mm M16 500kg (Ancor)

Galvanized Steel Engines Support 230mm M16 500kg (Ancor)Galvanized steel elastic support with pin..

(5)

143.34€ 137.60€ Ex Tax: 137.60€

Stainless Steel Shock Absorber-Marine Engine Mounts 115 mm, 600kg (Cec)

Stainless Steel Shock Absorber-Marine Engine Mounts 115 mm, 600kg (Cec)Stainless Steel elastic support without pin..

(14)

137.16€ 131.67€ Ex Tax: 131.67€

R&D Flexible Engine Mount (Shear Type / 340 - 761LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 340 - 761LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 152mm (6"), Base: 60.33mm (2.38") Length Base: 12..

(5)

126.11€ Ex Tax: 126.11€

R&D Flexible Engine Mount (Shear Type / 250 - 562LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 562LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(7)

125.94€ Ex Tax: 125.94€

R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud) The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375"). If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm. The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 116mm (4.57"), Base: 44.5mm (1.75") ..

(10)

125.41€ Ex Tax: 125.41€

R&D Flexible Engine Mount (Shear Type / 250 - 563LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 563LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 13..

(9)

122.64€ Ex Tax: 122.64€

R&D Flexible Engine Mount (Shear Type / 250 - 561LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 561LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 12..

(12)

121.18€ Ex Tax: 121.18€

R&D Flexible Engine Mount (Shear Type / 340 - 760LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 340 - 760LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 60.33mm (2.38") Length Base:..

(14)

116.79€ Ex Tax: 116.79€

R&D Flexible Engine Mount (Shear Type / 120 - 412LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 412LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 13..

(13)

114.11€ Ex Tax: 114.11€

R&D Flexible Engine Mount (Shear Type / 120 - 413LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 413LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 13..

(15)

110.82€ Ex Tax: 110.82€

R&D Flexible Engine Mount (Shear Type / 120 - 411LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 411LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 12..

(11)

109.36€ Ex Tax: 109.36€

Engine Shock Absorber-Marine Engine Mounts Y M16 80KG

Engine Shock Absorber-Marine Engine Mounts Y M16 80KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

(7)

107.84€ 103.53€ Ex Tax: 103.53€

Engine Shock Absorber-Marine Engine Mounts Y M16 180KG

Engine Shock Absorber-Marine Engine Mounts Y M16 180KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

(4)

107.84€ 103.53€ Ex Tax: 103.53€

Engine Shock Absorber-Marine Engine Mounts Y M16 50KG

Engine Shock Absorber-Marine Engine Mounts Y M16 50KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

(3)

107.84€ 103.53€ Ex Tax: 103.53€

Engine Shock Absorber-Marine Engine Mounts Y M16 120KG

Engine Shock Absorber-Marine Engine Mounts Y M16 120KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..

(15)

107.84€ 103.53€ Ex Tax: 103.53€

R&D Flexible Engine Mount (Shear Type / 80 - 232LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 232LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 13..

(9)

102.29€ Ex Tax: 102.29€

R&D Flexible Engine Mount (Shear Type / 80 - 233LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 233LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 139..

(8)

98.99€ Ex Tax: 98.99€

R&D Flexible Engine Mount (Shear Type / 80 - 231LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 231LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 127..

(11)

97.53€ Ex Tax: 97.53€

Engine Shock Absorber-Marine Engine Mounts Vetus HY230 60SH

Engine Shock Absorber-Marine Engine Mounts Vetus HY230 60SHVetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..

(5)

101.54€ 97.47€ Ex Tax: 97.47€

Engine Shock Absorber-Marine Engine Mounts Vetus HY150 50SH

Engine Shock Absorber-Marine Engine Mounts Vetus HY150 50SHVetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..

(14)

101.54€ 97.47€ Ex Tax: 97.47€

Engine Shock Absorber-Marine Engine Mounts Vetus HY100 40SH

Engine Shock Absorber-Marine Engine Mounts Vetus HY100 40SHVetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..

(9)

101.54€ 97.47€ Ex Tax: 97.47€

Engine Shock Absorber-Marine Engine Mounts VD M12 120KG

Engine Shock Absorber-Marine Engine Mounts VD M12 120KGV structure flexible mount for big stress with little load. For small engines working most of the time at low run...

(9)

97.93€ 94.01€ Ex Tax: 94.01€

Engine Shock Absorber-Marine Engine Mounts VD M12 100KG

Engine Shock Absorber-Marine Engine Mounts VD M12 100KGV structure flexible mount for big stress with little load. For small engines working most of the time at low run...

(10)

97.93€ 94.01€ Ex Tax: 94.01€

R&D Flexible Engine Mount (Shear Type / 80 - 230LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 230LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 12..

(7)

93.36€ Ex Tax: 93.36€

R&D Flexible Engine Mount (Shear Type / 50 - 175LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 50 - 175LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 12..

(3)

93.36€ Ex Tax: 93.36€

R&D Flexible Engine Mount (Shear Type / 300 - 680LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 300 - 680LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(6)

93.36€ Ex Tax: 93.36€

R&D Flexible Engine Mount (Shear Type / 250 - 560LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 560LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(14)

93.36€ Ex Tax: 93.36€

R&D Flexible Engine Mount (Shear Type / 120 - 410LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 410LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: ..

(6)

93.36€ Ex Tax: 93.36€

Engine Shock Absorber-Marine Engine Mounts 180mm screw (Ancor)

Engine Shock Absorber-Marine Engine Mounts 180mm screw (Ancor)Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...

(11)

95.32€ 91.51€ Ex Tax: 91.51€

Stainless Steel Shock Absorber-Marine Engine Mounts 92 mm, 350kg (Cec)

Stainless Steel Shock Absorber-Marine Engine Mounts 92 mm, 350kg (Cec)Stainless Steel elastic support without pin..

(6)

92.34€ 88.65€ Ex Tax: 88.65€

XD Engine Mounts 120 x 70mm 100kg

XD Engine Mounts 120 x 70mm 100kgAnti-vibration mounts for low power Diesel engines and for mobile applications that require a high degree of insulation. Specific design with low vertical and radial stiffness, ideal for engines with large vibrations at low idle speeds. 80 mm length M16 threaded stud.A (SH = Shore) ..

(13)

91.12€ 87.48€ Ex Tax: 87.48€

XD Engine Mounts 120 x 70mm 40kg

XD Engine Mounts 120 x 70mm 40kgAnti-vibration mounts for low power Diesel engines and for mobile applications that require a high degree of insulation. Specific design with low vertical and radial stiffness, ideal for engines with large vibrations at low idle speeds. 80 mm length M16 threaded stud.A (SH = Shore) ..

(6)

89.79€ 86.20€ Ex Tax: 86.20€

XD Engine Mounts 120 x 70mm 75kg

XD Engine Mounts 120 x 70mm 75kgAnti-vibration mounts for low power Diesel engines and for mobile applications that require a high degree of insulation. Specific design with low vertical and radial stiffness, ideal for engines with large vibrations at low idle speeds. 80 mm length M16 threaded stud.A (SH = Shore) ..

(5)

89.10€ 85.54€ Ex Tax: 85.54€

XD Engine Mounts 120 x 70mm 60kg

XD Engine Mounts 120 x 70mm 60kgAnti-vibration mounts for low power Diesel engines and for mobile applications that require a high degree of insulation. Specific design with low vertical and radial stiffness, ideal for engines with large vibrations at low idle speeds. 80 mm length M16 threaded stud.A (SH = Shore) ..

(7)

87.08€ 83.60€ Ex Tax: 83.60€

Engine Shock Absorber-Marine Engine Mounts VD M12 150KG

Engine Shock Absorber-Marine Engine Mounts VD M12 150KGV structure flexible mount for big stress with little load. For small engines working most of the time at low run...

(8)

79.00€ 75.84€ Ex Tax: 75.84€

Engine Shock Absorber-Marine Engine Mounts ROUND L M16

Engine Shock Absorber-Marine Engine Mounts ROUND L M16Flexible mounts for large power Diesel engines. 110mm length M16 threaded stud. (SH = Shore)..

(8)

78.07€ 74.95€ Ex Tax: 74.95€

Galvanized Steel Engines Support 183mm M16 190kg (Ancor)

Galvanized Steel Engines Support 183mm M16 190kg (Ancor)Galvanized steel elastic support with pin..

(10)

77.37€ 74.27€ Ex Tax: 74.27€

Engine Shock Absorber-Marine Engine Mounts M M16 280KG

Engine Shock Absorber-Marine Engine Mounts M M16 280KGFlexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..

(13)

71.74€ 68.87€ Ex Tax: 68.87€

Engine Shock Absorber-Marine Engine Mounts M M16 225KG

Engine Shock Absorber-Marine Engine Mounts M M16 225KGFlexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..

(3)

71.74€ 68.87€ Ex Tax: 68.87€

Engine Shock Absorber-Marine Engine Mounts M M16 150KG

Engine Shock Absorber-Marine Engine Mounts M M16 150KGFlexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..

(3)

71.74€ 68.87€ Ex Tax: 68.87€

Stainless Steel Shock Absorber-Marine Engine Mounts 62mm, 200kg (Cec)

Stainless Steel Shock Absorber-Marine Engine Mounts 62mm, 200kg (Cec)Stainless Steel elastic support without pin..

(9)

71.27€ 68.42€ Ex Tax: 68.42€

Engine Shock Absorber-Marine Engine Mounts Vetus K75 55SH

Engine Shock Absorber-Marine Engine Mounts Vetus K75 55SHVetus K engine mounts for small power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..

(15)

69.05€ 66.28€ Ex Tax: 66.28€

Engine Shock Absorber-Marine Engine Mounts Vetus K50V 45SH

Engine Shock Absorber-Marine Engine Mounts Vetus K50V 45SHVetus K engine mounts for small power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..

(12)

69.05€ 66.28€ Ex Tax: 66.28€

Engine Shock Absorber-Marine Engine Mounts Vetus K100 65SH

Engine Shock Absorber-Marine Engine Mounts Vetus K100 65SHVetus K engine mounts for small power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..

(12)

69.05€ 66.28€ Ex Tax: 66.28€

Engine Shock Absorber-Marine Engine Mounts 130mm screw (Ancor)

Engine Shock Absorber-Marine Engine Mounts 130mm screw (Ancor)Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...

(3)

63.73€ 61.18€ Ex Tax: 61.18€

Galvanized Steel Engines Support 120mm M12 85kg (Ancor)

Galvanized Steel Engines Support 120mm M12 85kg (Ancor)Galvanized steel elastic support with pin..

(12)

61.45€ 58.99€ Ex Tax: 58.99€

Engine Shock Absorber-Marine Engine Mounts 100mm (Ancor)

Engine Shock Absorber-Marine Engine Mounts 100mm (Ancor)Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...

(8)

52.00€ 49.92€ Ex Tax: 49.92€

Engine Shock Absorber-Marine Engine Mounts ROUND M M12

Engine Shock Absorber-Marine Engine Mounts ROUND M M12Flexible mounts for medium power Diesel engines. 100mm length M12 threaded stud. (SH = Shore)..

(8)

44.67€ 42.88€ Ex Tax: 42.88€

Engine Shock Absorber-Marine Engine Mounts S M12 95KG

Engine Shock Absorber-Marine Engine Mounts S M12 95KGFlexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..

(14)

33.84€ 32.49€ Ex Tax: 32.49€

Engine Shock Absorber-Marine Engine Mounts S M12 80KG

Engine Shock Absorber-Marine Engine Mounts S M12 80KGFlexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..

(13)

33.84€ 32.49€ Ex Tax: 32.49€

Engine Shock Absorber-Marine Engine Mounts S M12 50KG

Engine Shock Absorber-Marine Engine Mounts S M12 50KGFlexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..

(3)

33.84€ 32.49€ Ex Tax: 32.49€

Engine Shock Absorber-Marine Engine Mounts ROUND S M12

Engine Shock Absorber-Marine Engine Mounts ROUND S M12Flexible mounts for small power Diesel engines. 100mm length M12 threaded stud. (SH = Shore)..

(7)

33.84€ 32.49€ Ex Tax: 32.49€