Galvanic Isolators

Galvanic Isolators

Galvanic Isolators

Show:
Sort By:

Victron Electric Isolation Transformer (3600W)

Victron Electric Isolation Transformer (3600W) The Victron isolation transformer is essential for preventing electrolytic corrosion and to guarantee a safe electrical system on board boats. It eliminates electrical continuity between AC shore power and the boat and eliminates the need for galvanic isolators and polarity alarms. When using shore power, if the ground wire from the shore supply is connected to a metal part of the boat, galvanic corrosion will occur. This can attack important areas such as the propeller and shaft, as well as quickly dissolving anodes that are there to protect them. Not connecting the ground wire is not a viable work around for this, as this would mean fuses and Ground Fault Circuit Interrupters (GFCIs) will not work in case of an electrical fault. This isolation transformer was designed to combat these issues and allow a safe shore power connection that is not harmful to your boat. S..

(9)

1,011.46€ Ex Tax: 1,011.46€

Index Marine IM2160 Galvanic Isolator (32 Amps)

Index Marine IM2160 Galvanic Isolator (32 Amps) This Index Marine galvanic isolation blocker eliminates the potential difference between boats and the shore, preventing galvanic action caused by the different metals used. The IM2160A32 galvanic isolator electrolysis blocker is rated for a maximum current of 32 amps. Unit Classification 32A Shore Inlet Compatibility Single: 30, 32A Dual: 15, 16, 30, 32A 120/240Vac 120/240Vac AC Frequency 50/60Hz Max. Continuous Current 35A Max. Surge Current 400A Operating Temperature Range -55°C to 150°C Weight 642g Enclosure Length 144mm Enclosure Width 77mm Enclosure Height 85mm 1 - Mounting the isolator: The IM2160 galvanic isolator unit should be mounted using the screws provided and located in a position that will not be subjected to excessive heat (e.g. close to the engine or exhaust system). It should also be positioned as close as possible t..

(10)

184.41€ Ex Tax: 184.41€

Index Marine IM2160 Galvanic Isolator (16 Amps)

Index Marine IM2160 Galvanic Isolator (16 Amps) This Index Marine galvanic isolation blocker eliminates the potential difference between boats and the shore, preventing galvanic action caused by the different metals used. The IM2160A16 galvanic isolator electrolysis blocker is rated for a maximum current of 16 amps. Unit Classification 16A Shore Inlet Compatibility Single: 15, 16A Dual: 15,16A 120/240Vac 120/240Vac AC Frequency 50/60Hz Max. Continuous Current 35A Max. Surge Current 400A Operating Temperature Range -55°C to 150°C Weight 592g Enclosure Length 120mm Enclosure Width 77mm Enclosure Height 85mm Installation Instructions: 1 - Mounting the isolator: The IM2160 galvanic isolator unit should be mounted using the screws provided and located in a position that will not be subjected to excessive heat (e.g. close to the engine or exhaust system). It should also be positioned as cl..

(11)

147.53€ Ex Tax: 147.53€