Heat Exchangers and Oil Coolers

Heat Exchangers and Oil Coolers

Heat Exchangers and Oil Coolers

Show:
Sort By:

Bowman PE580 (Perkins 6354)

Bowman PE580 (Perkins 6354) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Perkins 6354 engines. The Bowman PE580-3676 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has an 8 bolt flange on a 98mm PCD with 3/8" x 16 UNC bolt holes. The heat exchanger has 28mm neoprene end caps for raw water, a fresh water input to suit 50mm ID hose and a fresh water output to suit 57mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 914mm Brand Bowman Country of Origin United Kingdom ..

(5)

2,520.77€ Ex Tax: 2,520.77€

Bowman FH420-2938 ( Ford 6 Cyl 250 BHP)

Bowman FH420-2938 ( Ford 6 Cyl 250 BHP) The Bowman FH420-2938 engine mounted header tank is suitable for Ford 6 Cylinderinder 250 BHP older engines, such as the Ford 2704 ET engine. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 438mm long, 148mm high and 221mm wide. This FH420-2938 header tank will replace the Bowman FH420-2928 header tank. Specifications Height 148mm (5.8") Length 438mm Brand Bowman Country of Origin United Kingdom ..

(8)

2,503.52€ Ex Tax: 2,503.52€

Bowman GH400 (Mercedes)

Bowman GH400 (Mercedes) The Bowman GH400-3482-4 marine three pass header tank heat exchanger is typically suitable for 400kW / 540HP engines. This Bowman heat exchanger can be used with Mercedes OM403, OM423, OM404, OM424, OM404A and OM424A engines among others. There is a raw water input connection for 1-1/2" BSP one end and a raw water output connection for 1-1/2" BSP on the other end. The heat exchanger is supplied with two 70mm aluminium hose connectors for the engine water inlet and outlet, as well as the required fixings (2 x nitrile O-ring seals and 8 x M12 socket screws). the heat exchanger is no longer supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. Previously you would have needed to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger, however Bowman now supply aluminium hose adaptors. If you wish to have counter ..

(12)

2,376.14€ Ex Tax: 2,376.14€

Bowman FH320-3387 (Ford 4 & 6 Cylinder)

Bowman FH320-3387 (Ford 4 & 6 Cylinder) The Bowman FH320-3387 engine mounted header tank is suitable for Ford 4 Cylinderinder and Ford 6 Cylinderinder engines. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 438mm long, 148mm high and 221mm wide. Specifications Height 148mm (5.8") Length 438mm Brand Bowman Country of Origin United Kingdom Connections Raw water: 32mm ..

(5)

2,360.57€ Ex Tax: 2,360.57€

Bowman FH420-2938 (New Ford 6 Cyl 250 BHP)

Bowman FH420-2938 (New Ford 6 Cyl 250 BHP) The Bowman FH420-2938 engine mounted header tank is suitable for Ford 6 Cylinderinder 250 BHP newer engines, such as the Ford 2704 ET engine. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 574mm long and has M8 x 12 fixing holes. This FH420-2938 header tank will replace the Bowman FH420-2928 header tank. Specifications Length 574mm Brand Bowman Country of Origin United Kingdom Connections Raw water: 32mm ..

(13)

2,187.38€ Ex Tax: 2,187.38€

Bowman FH480-2958 (Ford 6 Cylinder)

Bowman FH480-2958 (Ford 6 Cylinder) The Bowman FH480-2958 engine mounted header tank is suitable for Ford 6 Cylinderinder engines, such as the Ford 2728T engine. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 46mm raw water input and output connections. The Bowman header tank measures 583mm long, 258mm high, 251mm wide and has M8 x 12 fixing holes. Specifications Height 258mm Length 583mm Brand Bowman Country of Origin United Kingdom Connections ..

(13)

2,170.88€ Ex Tax: 2,170.88€

Bowman GH300-3482-3 (429HP)

Bowman GH300-3482-3 (429HP) The Bowman GH300-3482-3 marine three pass header tank heat exchanger is typically suitable for 320kW / 429HP engines. This Bowman heat exchanger can be used with Mercedes OM402, OM422 and OM407A engines among others. There is a raw water input connection for 1-1/2" BSP one end and a raw water output connection for 1-1/2" BSP on the other end. The heat exchanger is supplied with two 70mm aluminium hose connectors for the engine water inlet and outlet, as well as the required fixings (2 x nitrile O-ring seals and 8 x M12 socket screws). the heat exchanger is no longer supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. Previously you would have needed to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger, however Bowman now supply aluminium hose adaptors. If you wish to have counter flange plates instead o..

(13)

2,087.81€ Ex Tax: 2,087.81€

Bowman PE390 (Perkins 4236 & Phaser 1004)

Bowman PE390 (Perkins 4236 & Phaser 1004) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Perkins 4236 and Phaser 1004 engines. The Bowman PE390-3674 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has an 8 bolt flange on a 98mm PCD. The heat exchanger has 28mm neoprene end caps for raw water and fresh water connections to suit 50mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 687mm Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers ..

(4)

1,982.75€ Ex Tax: 1,982.75€

Bowman FH220-3386 (Ford 4 Cylinder)

Bowman FH220-3386 (Ford 4 Cylinder) The Bowman FH220-3386 engine mounted header tank is suitable for Ford 4 Cylinderinder 2711, 2712E, 2713, 2714 and 2715E engines. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 440mm long, 237mm high and 204mm wide. Specifications Height 237mm Length 440mm Brand Bowman Country of Origin United Kingdom Connections Raw water: 32mm ..

(11)

1,981.19€ Ex Tax: 1,981.19€

Bowman MB180 (Mercedes OM636)

Bowman MB180 (Mercedes OM636) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Mercedes OM636 engines. The Bowman MB180-3050 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has a 4 bolt flange on an 68mm PCD. The heat exchanger has 22mm neoprene end caps for raw water and fresh water connections to suit 22mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 608mm Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers ..

(3)

1,893.23€ Ex Tax: 1,893.23€

Bowman FH410-3006 (Perkins 6354)

Bowman FH410-3006 (Perkins 6354) The Bowman FH410-3006 engine mounted header tank is suitable for Perkins 6354 inclined engines. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 532mm long and has M10.5 fixing holes. Specifications Length 532mm Brand Bowman Country of Origin United Kingdom Connections Raw water: 32mm Construction Aluminium LM6M body, cupro nickel tu..

(10)

1,793.93€ Ex Tax: 1,793.93€

Bowman FH410-2986 (Perkins 6354)

Bowman FH410-2986 (Perkins 6354) The Bowman FH410-2986 engine mounted header tank is suitable for Perkins 6354 vertical engines. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 568mm long and has M10.5 fixing holes. Specifications Length 568mm Brand Bowman Country of Origin United Kingdom Connections Raw water: 32mm Construction Aluminium LM6M body, cupro nickel tu..

(8)

1,793.93€ Ex Tax: 1,793.93€

Replacement Tubestack Bowman 1715-6TN1

Replacement Tubestack Bowman 1715-6TN1 The Bowman 1715-6TN1 replacement heat exchanger tubestack, also known as a cooling bundle, can be used with Bowman FH410-2985 and FH410-3005 marine heat exchangers. Specifications Length 504mm Brand Bowman Country of Origin United Kingdom Diameter 95.2mm Model 1715-6TN1 Suitability Bowman FH410-2985 & FH410-3005 marine heat exchangers. ..

(7)

1,606.44€ Ex Tax: 1,606.44€

Bowman FM240 (FSD425 & York 2.4)

Bowman FM240 (FSD425 & York 2.4) This Bowman heat exchanger manifold assembly is suitable for direct fitting to the Ford FSD425 2.5 direct injection engines and York 2.4 diesel engines. This FM240-3013 heat exchanger unit has a tubestack fitted for heat exchanger cooling systems. Order gaskets, hoses and exhaust outlet as extras. Specifications Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Heat Exchanger Manifolds / Manicoolers Connections Raw water: 22mm ID neoprene end caps, Fresh water: To suit 44mm ID hose Construction ..

(7)

1,599.58€ Ex Tax: 1,599.58€

Bowman CM600-5020 (Cummins 6B)

Bowman CM600-5020 (Cummins 6B) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Cummins 6B, 6BT and 6BTA engines. The Bowman CM600-5020 Cummins exhaust manifold is made from marine grade aluminium, and will fit most of the Cummins 6B engines. Order gaskets, hoses and exhaust outlet as extras. Specifications Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Heat Exchanger Manifolds / Manicoolers Construction Marine Grade Aluminium Model CM60..

(14)

1,548.67€ Ex Tax: 1,548.67€

Bowman GL180

Bowman GL180 Bowman tube heat exchangers are used for heating or cooling process fluids, for example the closed circuit cooling of electrical equipment and for cooling water soluble oil solutions in quenching tanks. The Bowman GL180 tube heat exchanger has an alloy body with cupro nickel tubestack and can be mounted remotely from the engine. This heat exchanger features SAE flanges on the fresh water ports. Specifications Brand Bowman Country of Origin United Kingdom Connections Raw Water: 1-1/2" BSP, Fresh Water: 1-1/2" BSP For Maximum Horsepower 335HP Model ..

(11)

1,474.49€ Ex Tax: 1,474.49€

Bowman Tubestack 518-941TN1

Bowman Tubestack 518-941TN1 The Bowman 518-941TN1 replacement heat exchanger tubestack, also known as a cooling bundle, can be used with the following Bowman marine heat exchanger manifolds: BL570-3266, FM602-4092, FM662-3886 and GM550-3606. This tubestack features 8 ventilation holes. Specifications Length 941mm (37.05") Brand Bowman Country of Origin United Kingdom Diameter 51mm (2") Model 518-941TN1 Suitability Bowman BL570-3266, FM602-4092, FM662-..

(3)

1,399.79€ Ex Tax: 1,399.79€

Bowman PE122 (Perkins 404C)

Bowman PE122 (Perkins 404C) The combined Bowman heat exchanger manifold and header tank PE122-5009 is suitable for Perkins 404C base engines. The heat exchanger has 22mm raw water connections and fresh water connections to suit 35mm ID hose. This heat exchanger manifold and header tank is supplied with a cover plate (PE1-5010) and spring (PE2-5011). Please Note: This heat exchanger / header tank does not include a thermostat or gasket. Specifications Length 676mm Supplied With Cover Plate & Spring Brand Bowman Country of Origin United Kingdom Manifolds and Manicooler..

(7)

1,394.23€ Ex Tax: 1,394.23€

Bowman BL180-3318

Bowman BL180-3318 Bowman BL180-3318 combined water cooled exhaust manifold and heat exchanger for BMC 1.5 and BMC 1.8 B series based diesel engines. Bolts directly to the exhaust ports. Complete with tubestack and rubber end caps. Order gaskets, hoses and exhaust outlet as extras. Specifications Supplied With Tubestack, Rubber End Caps. Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Heat Exchanger Manifolds / Manicoolers Connections Raw water: 22mm ID neoprene end caps, Fresh water: To suit 32mm ID hose,..

(5)

1,390.50€ Ex Tax: 1,390.50€

Bowman GL140-4076-2

Bowman GL140-4076-2 Bowman intercoolers / charge air heat exchangers are suitable for cooling both marine engines and land based engines, including: gensets, fire pumps and co-generation equipment. Charge air coolers are also suitable for use in engine testing and development programs. This Bowman GL140 three pass intercooler is designed to give increased fuel efficiency and engine power when used in conjunction with a turbo charger. Please Note: the figures listed above are based on Air temperature from 180°C to 50°C at 1.75 Bar G and using water temperature at 20°C. Heat rejection: 40 kW Specifications Flow Rate Charge Air Flow: 15.4kg per minute, Water flow: 215 LPM Height 220mm Length ..

(6)

1,364.63€ Ex Tax: 1,364.63€

Bowman FH400-3282-3

Bowman FH400-3282-3 The Bowman FH400-3282-3 marine three pass header tank heat exchanger is typically suitable for 200kW / 270HP engines. This Bowman heat exchanger can be used with Gardner 8LX and New Holland Genesis 675TI engines among others. There is a raw water input connection for 1-1/4" BSP one end and a raw water output connection for 1-1/4" BSP on the other end. the heat exchanger is supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. You will need to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger. Specifications Capacity Raw Water: 2.00 Litres, Engine Water: 9.15 Litres, Header Tank: 5.70 Litres Engine Water Pressure Maximum 1 bar (filler cap rating dependant) ..

(13)

1,352.90€ Ex Tax: 1,352.90€

Bowman FH440-3404

Bowman FH440-3404 The Bowman FH440-3404 engine mounted header tank is suitable for Ford 2700, Ford 2710 and Ford 2720 series engines such as Ford 2711, 2712E, 2713, 2714, 2715E, 2722, 2723 and 2725 engines. The header tank features an aluminium LM6M body, a cupro nickel tubestack and naval brass end covers with 32mm raw water input and output connections. The Bowman header tank measures 438mm long, 248mm high and has M8 x 12 fixing holes. Specifications Height 248mm Length 438mm Brand Bowman Country of Origin United Kingdom Connections ..

(10)

1,331.74€ Ex Tax: 1,331.74€

Bowman PE3152-5002 (Perkins 3152)

Bowman PE3152-5002 (Perkins 3152) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Perkins 3152 engines. The Bowman PE3152-5002 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has a 4 bolt flange on a 79mm PCD with 9mm diameter bolt holes. The heat exchanger has 22mm neoprene end caps for raw water and fresh water connections to suit 28mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 674mm Brand Bowman Country of Origin United Kingdom Manifol..

(6)

1,317.54€ Ex Tax: 1,317.54€

Bowman PE180-3483

Bowman PE180-3483 This Bowman heat exchanger manifold assembly is suitable for direct fitting to Perkins 4.99, Perkins 4.107 and Perkins 4.108 marine engines. The Bowman PE180-3483 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has a 4 bolt flange on a 76mm x 62mm PCD with 3/8" UNF x 15 bolt holes. The heat exchanger has a 22mm raw water input, a 28mm raw water output and fresh water connections to suit 35mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 609mm Brand Bowman Country of Origin United Kingdom ..

(7)

1,306.18€ Ex Tax: 1,306.18€

Bowman IS277-5001 (Isuzu 4JB1 & 4JG1)

Bowman IS277-5001 (Isuzu 4JB1 & 4JG1) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Isuzu 4JB1 and Isuzu 4JG1 base engines. The Bowman IS277-5001 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has a 4 bolt flange on an 81mm PCD with 9mm diameter bolt holes. The heat exchanger has 32mm neoprene end caps for raw water and fresh water connections to suit 35mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 796mm Brand Bowman Country of Origin United Kingdom ..

(8)

1,277.76€ Ex Tax: 1,277.76€

Bowman GL140

Bowman GL140 Bowman tube heat exchangers are used for heating or cooling process fluids, for example the closed circuit cooling of electrical equipment and for cooling water soluble oil solutions in quenching tanks. The GL140 Bowman tube heat exchanger has an alloy body with cupro nickel tubestack and can be mounted remotely from the engine. This each exchanger features SAE flanges on the fresh water ports. Specifications Brand Bowman Country of Origin United Kingdom Connections Raw Water: 1-1/2" BSP, Fresh Water: 1-1/2" BSP For Maximum Horsepower 240HP Model ..

(11)

1,232.60€ Ex Tax: 1,232.60€

Bowman FC160-3116-5

Bowman FC160-3116-5 The Bowman FC160-3116-5 tubular oil cooler heat exchanger is designed for cooling engine oil. Specifications Length 690mm Brand Bowman Country of Origin United Kingdom Connections Oil: 3/4" BSP female, Raw Water: straight naval brass end caps for 45mm ID hose Construction Copper nickel tube stack with naval brass end caps Diameter OD: 130mm For Maximum Horsepower ..

(10)

1,232.31€ Ex Tax: 1,232.31€

Bowman PE180-3483KC

Bowman PE180-3483KC The Bowman PE180-3483KC combined heat exchanger, header tank and water cooled exhaust manifold is suitable for keel cooled Perkins 499, Perkins 4107 and Perkins 4108 engines. This keel cooled manifold and header tank unit has no tubestack fitted. Keel cooling is suitable for small boats that operate in shallow, weedy waters. Specifications Length 609mm Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Keel Cooled Manifolds / Manicoolers Connections Fresh water: for 35mm ID hose, Raw wate..

(7)

1,201.96€ Ex Tax: 1,201.96€

Bowman FM180-3872

Bowman FM180-3872 The Bowman FM180-3872 combined water cooled exhaust manifold and heat exchanger is suitable for Ford XLD416 and Ford XLD418 engines. The heat exchanger manifold / header tank will bolt directly to the exhaust ports. This heat exchanger manifold is supplied complete with cooling tubestack and rubber end caps. Please order gaskets, hoses and exhaust outlet as extras. Specifications Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Heat Exchanger Manifolds / Manicoolers Connections Raw water: 22mm ID neoprene end caps, Fresh water: To suit 32mm ID hose ..

(5)

1,199.14€ Ex Tax: 1,199.14€

Bowman FC140-3116-4

Bowman FC140-3116-4 The Bowman FC140-3116-4 tubular oil cooler heat exchanger is designed for cooling engine oil. Specifications Length 610mm Brand Bowman Country of Origin United Kingdom Connections Oil: 1" BSP female, Raw Water: straight naval brass end caps for 58mm ID hose Construction Copper nickel tube stack with naval brass end caps Diameter OD: 130mm For Maximum Horsepower ..

(5)

1,115.84€ Ex Tax: 1,115.84€

Bowman FM180-3872KC

Bowman FM180-3872KC The Bowman FM180-3872KC combined heat exchanger, header tank and water cooled exhaust manifold for keel cooled Ford XDL416 and Ford XLD418 series engines. The keel cooling is suitable for small boats that operate in shallow, weedy waters. Specifications Length 609mm Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Keel Cooled Manifolds / Manicoolers Connections Fresh water: for 32mm ID hose, Raw water: Blanking end caps. Construction ..

(8)

1,111.63€ Ex Tax: 1,111.63€

Bowman MK130-3996 (Mitsubishi K3)

Bowman MK130-3996 (Mitsubishi K3) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Mitsubishi K3 engines. The Bowman MK130-3996 heat exchanger unit features an aluminium LM6M body with a cupro nickel tubestack and neoprene end covers fitted. This heat exchanger manifold and header tank has a 4 bolt flange on an 81mm PCD with 10mm diameter bolt holes. The heat exchanger has 22mm neoprene end caps for raw water and fresh water connections to suit 35mm ID hose. Order gaskets, hoses and exhaust outlet as extras. Specifications Length 449mm Brand Bowman Country of Origin United Kingdom Manif..

(15)

1,041.97€ Ex Tax: 1,041.97€

Bowman FH200-4166 (Perkins 4236)

Bowman FH200-4166 (Perkins 4236) The Bowman FH200-4166-3 marine two pass header tank heat exchanger is typically suitable for 90kW / 120HP engines. This Bowman heat exchanger can be used with Perkins 4236 engines among others. There is a raw water input connection for 1" BSP one end and a raw water output connection for 1" BSP on the other end. Please note: the heat exchanger is supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. You will need to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger. Specifications Capacity 2.93 Litres (Raw water volume: 1.10 litres, Engine water volume: 4.50 litres) Engine Water Pressure Maximum working pressure: 1 bar (filler cap..

(13)

992.77€ Ex Tax: 992.77€

Replacement Tubestack Bowman 1448-3TN1B

Replacement Tubestack Bowman 1448-3TN1B The Bowman 1448-3TN1B replacement heat exchanger tubestack, also known as a cooling bundle, can be used with Bowman marine heat exchanger manifolds. Bowman 1448-3TN1B tubestack tube bundle is only available at Special Pricing whilst we have stocks of them at ASAP Supplies Specifications Length 316mm Brand Bowman Country of Origin United Kingdom Diameter 114.3mm Model 1448-3TN1B Suitability FH260 ..

(15)

984.87€ Ex Tax: 984.87€

Bowman FH300-3282-2

Bowman FH300-3282-2 The Bowman FH300-3282-2 marine three pass header tank heat exchanger is typically suitable for 150kW / 201HP engines. This Bowman heat exchanger can be used with Ford BSD-678 and Gardner 6LX engines among others. There is a raw water input connection for 1-1/4" BSP one end and a raw water output connection for 1-1/4" BSP on the other end, as well as a 57mm fresh water connection.. Specifications Capacity Raw Water: 1.55 Litres, Engine Water: 6.55 Litres, Header Tank: 4.12 Litres Engine Water Pressure Maximum 1 bar (filler cap rating dependant) Raw Water Flow Maximum 125 Litres Per Minute Pressure Rating ..

(14)

976.28€ Ex Tax: 976.28€

Bowman FC120-3116-3

Bowman FC120-3116-3 The Bowman FC120-3116-3 tubular oil cooler heat exchanger is designed for cooling engine oil. Specifications Length 480mm Brand Bowman Country of Origin United Kingdom Connections Oil: 1" BSP female, Raw Water: straight naval brass end caps for 58mm ID hose Construction Copper nickel tube stack with naval brass end caps Diameter 130mm For Maximum Horsepower ..

(10)

970.95€ Ex Tax: 970.95€

Bowman FC100

Bowman FC100 This Bowman FC100 oil cooler is designed to cool engine oil. The connection for the oil tube is 1" BSP female, and the raw water connection is a straight end cap for 58mm inside diameter hose. The cooler has a tubestack constructed from copper nickel and end caps made of naval brass. The oil cooler measures 380mm in length and has an outside diameter of 130mm. The Bowman FC100 is suitable for a maximum of 180HP / 135kW engines. Specifications Length 380mm Brand Bowman Country of Origin United Kingdom Connections Oil: 1" BSP female, Raw Water: straight naval brass end caps for 58mm ID hose ..

(14)

860.92€ Ex Tax: 860.92€

Bowman FG100

Bowman FG100 Bowman intercoolers / charge air heat exchangers are suitable for cooling both marine engines and land based engines, including: gensets, fire pumps and co-generation equipment. Charge air coolers are also suitable for use in engine testing and development programs. This Bowman FG100 three pass intercooler is designed to give increased fuel efficiency and engine power when used in conjunction with a turbo charger. Please Note: the figures listed above are based on Air temperature from 180°C to 50°C at 1.75 Bar G and using water temperature at 20°C. Heat rejection: 25.4 kW Specifications Flow Rate Charge Air Flow: 9.8kg per minute, Water flow: 140 LPM Height 180mm (7") Length ..

(15)

823.23€ Ex Tax: 823.23€

Bowman FC120-3891-3

Bowman FC120-3891-3 Bowman tube heat exchangers are used for heating or cooling process fluids, for example the closed circuit cooling of electrical equipment and for cooling water soluble oil solutions in quenching tanks. The FC120-3891-3 Bowman tube heat exchanger has an alloy body with cupro nickel tubestack and can be mounted remotely from the engine. Specifications Height 130mm (5-1/8") Length 456mm Width 126mm Brand Bowman Country of Origin United Kingdom Connections ..

(11)

804.43€ Ex Tax: 804.43€

Bowman 518-600TN1

Bowman 518-600TN1 The Bowman 518-600TN1 replacement heat exchanger tubestack, also known as a cooling bundle, can be used with the following Bowman marine heat exchanger manifolds: BL250-3325, FM242-4204, LR250-3736, MB220-3155, PE250-3514 and PE390-3674. This tubestack features 8 ventilation holes. Specifications Length 600mm (23.575") Brand Bowman Country of Origin United Kingdom Diameter 51mm (2") Model 518-600TN1 Suitability Bowman BL250-3325, FM2..

(5)

801.00€ Ex Tax: 801.00€

Bowman FC120-1426-3

Bowman FC120-1426-3 Bowman FC120 hydraulic oil cooler heat exchanger is also suitable to be used for heat transfer fluids, lubricating and quenching oils. Typical Example of oil cooler performance with an oil outlet temperature of 50°C and water inlet temperature of 25°C: Specifications Height 130mm (5-1/8") Length 456mm Width 126mm Brand Bowman Country of Origin United Kingdom Connections Oil & Water: 1" BSP Female ..

(5)

789.35€ Ex Tax: 789.35€

Bowman FH100-3182-2

Bowman FH100-3182-2 The Bowman FH100-3182-2 marine three pass header tank heat exchanger is typically suitable for 82kW / 110HP engines. This Bowman heat exchanger can be used with Ford BSD-329/32/3/H, Ford BSD-442/4 and Gardner 4LW engines among others. There is a raw water input connection for 1" BSP one end and a raw water output connection for 1" BSP on the other end, as well as a 45mm fresh water connection. Specifications Capacity Raw Water: 0.85 Llitres, Engine Water: 3.25 Litres, Header Tank: 2.08 Litres Engine Water Pressure Maximum 1 bar (filler cap rating dependant) Raw Water Flow Maximum 95 Litres Per Minute Pressure Rating ..

(11)

773.44€ Ex Tax: 773.44€

Bowman FC100-4074-2

Bowman FC100-4074-2 Bowman intercoolers / charge air heat exchangers are suitable for cooling both marine engines and land based engines, including: gensets, fire pumps and co-generation equipment. Charge air coolers are also suitable for use in engine testing and development programs. This Bowman FC100 three pass intercooler is designed to give increased fuel efficiency and engine power when used in conjunction with a turbo charger. Please Note: the figures listed above are based on Air temperature from 180°C to 50°C at 1.75 Bar G and using water temperature at 20°C. Heat rejection: 11.2 kW Specifications Flow Rate Charge Air Flow: 4.3kg per minute Height 163mm Length 358mm ..

(9)

739.55€ Ex Tax: 739.55€

Bowman FH200-3182-3

Bowman FH200-3182-3 The Bowman FH200-3182-3 marine three pass header tank heat exchanger is typically suitable for 115kW / 154HP engines. This Bowman heat exchanger can be used with Ford BSD-666 engines among others. There is a raw water input connection for 1" BSP one end and a raw water output connection for 1" BSP on the other end. the heat exchanger is supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. You will need to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger. Specifications Capacity Raw Water: 1.10 Litres, Engine Water: 4.50 Litres, Header Tank: 2.93 Litres Engine Water Pressure Maximum 1 bar (filler cap rating dependant) Raw Wa..

(10)

737.83€ Ex Tax: 737.83€

Bowman EC160-890-5

Bowman EC160-890-5 The Bowman EC160-890-5 tubular oil cooler heat exchanger is designed for cooling engine oil. Specifications Length 590mm Brand Bowman Country of Origin United Kingdom Connections Oil: 3/4" BSP female, Raw Water: straight naval brass end caps for 45mm ID hose Construction Copper nickel tube stack with naval brass end caps Diameter OD: 100mm For Maximum Horsepower ..

(6)

724.29€ Ex Tax: 724.29€

Bowman 3445-4TN1B

Bowman 3445-4TN1B The Bowman replacement tubestack is suitable for Bowman heat exchanger FH410. This tubestack has a 96mm outside diameter and measures 504mm long. Specifications Length 504mm Brand Bowman Country of Origin United Kingdom Diameter OD: 96mm Model 3445-4TN1B Suitability FH410 ..

(4)

707.83€ Ex Tax: 707.83€

Bowman FC100-3891-2

Bowman FC100-3891-2 Bowman tube heat exchangers are used for heating or cooling process fluids, for example the closed circuit cooling of electrical equipment and for cooling water soluble oil solutions in quenching tanks. The Bowman FC100-3891-2 tube heat exchanger has an alloy body with cupro nickel tubestack and can be mounted remotely from the engine. Specifications Height 130mm (5-1/8") Length 358mm Width 126mm Brand Bowman Country of Origin United Kingdom Connections ..

(12)

701.27€ Ex Tax: 701.27€

Bowman EH200-3401-3

Bowman EH200-3401-3 The Bowman EH200-3401-3 marine three pass header tank heat exchanger is typically suitable for 52kW / 70HP engines. There is a raw water input connection for 3/4" BSP one end and a raw water output connection for 3/4" BSP on the other end. The heat exchanger is supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. You will need to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger. This heat exchanger could be supplied with either composite or brass end caps depending on stock. Specifications Capacity Raw Water Volume: 0.60 Litres, Engine Water Volume: 2.20 Litres, Header Tank Capacity: 1.32 Litres Engine Water Pressure Maximum 1 bar (filler cap rating dependant) ..

(14)

685.79€ Ex Tax: 685.79€

Bowman 514-525TN1

Bowman 514-525TN1 The Bowman 514-525TN1 replacement heat exchanger tubestack, also known as a cooling bundle, can be used with the following Bowman marine heat exchanger manifolds: BL180-3318, FM160-3120, FM162-3872, FM180-3872, FM240-3013, FM300-3799, FM400-3800, MB180-3050, PE180-3075 and PE180-3483. This tubestack features 4 ventilation holes. Specifications Length 525mm (20.5") Brand Bowman Country of Origin United Kingdom Diameter 51mm (2") Model 514-525TN1 Replaces ..

(9)

657.96€ Ex Tax: 657.96€

Bowman 1566-1TN1A

Bowman 1566-1TN1A The Bowman 1566-1TN1A replacement heat exchanger tubestack, also known as a cooling bundle, can be used with Bowman EH220 heat exchangers. The Bowman EH220 Heat Exchanger Header Tank was commonly fitted to BMC 1500 and some BMC 1800 diesel engine conversions, such as the Thornycroft T90 marine engine when fitted with a separate water cooled exhaust manifold. The Bowman 1566-1TN1A replacement tubestack fits inside the heat exchanger and is held in place with the two end caps and sealed with two o rings. Specifications Length 278mm Brand Bowman Country of Origin United Kingdom Construction ..

(4)

648.07€ Ex Tax: 648.07€

Bowman EH100-3401-2

Bowman EH100-3401-2 The Bowman EH100-3401-2 marine three pass header tank heat exchanger is typically suitable for 40kW / 54HP engines. There is a raw water input connection for 3/4" BSP one end and a raw water output connection for 3/4" BSP on the other end. the heat exchanger is supplied with counter flanges, stud bolts and gaskets for the fresh water circuit. You will need to fabricate a suitable connection for the fresh water coolant input and outputs of the heat exchanger. Specifications Capacity Raw Water Volume: 0.45 Litres, Engine Water Volume: 1.30 Litres, Header Tank Capacity: 0.90 Litres Engine Water Pressure Maximum 1 bar (filler cap rating dependant) Raw Water Flow Maxi..

(10)

641.45€ Ex Tax: 641.45€

Bowman 514-468TN1

Bowman 514-468TN1 The Bowman 514-468TN1 heat exchanger tubestack, also known as a cooling bundle, can be used with the following Bowman marine heat exchanger manifolds: Bowman MK140-3997, Bowman MS140-4296, Bowman VW150-3490 and Bowman VW160-3495. This tubestack features 4 ventilation holes. Specifications Length 468mm (18.4") Brand Bowman Country of Origin United Kingdom Diameter 51mm (2") Model 514-468TN1 Suitability Bowman MK140-3997, MS140-4296, V..

(12)

624.97€ Ex Tax: 624.97€

Bowman DH120-3064-1

Bowman DH120-3064-1 The Bowman DH120-3064-1 marine single pass header tank heat exchanger is typically suitable for 20kW / 27HP engines. There are neoprene raw water connections with a 22mm ID input one end and a 22mm ID output on the other end. The neoprene end caps (2679NP) are part number: BOW-2679NP. Specifications Capacity Raw Water Volume: 0.28 Litres, Engine Water Volume: 1.25 Litres, Header Tank Capacity: 0.90 Litres Engine Water Pressure 1 Bar Maximum (filler cap rating dependant) Raw Water Flow 60 Litres Per Minute Maximum Pressure Rating Filler Cap: 10.8 PSI (0.75 Bar / 75kPa) ..

(14)

624.02€ Ex Tax: 624.02€

Bowman FC080-1426-1

Bowman FC080-1426-1 Bowman FC80 hydraulic oil cooler heat exchanger is also suitable to be used for heat transfer fluids, lubricating and quenching oils. Typical Example of oil cooler performance with an oil outlet temperature of 50°C and water inlet temperature of 25°C: Specifications Height 130mm (5-1/8") Length 272mm Width 126mm Brand Bowman Country of Origin United Kingdom Connections Oil & Water: 1" BSP Female ..

(3)

605.72€ Ex Tax: 605.72€

Bowman EC100-3249-2

Bowman EC100-3249-2Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..

(12)

630.61€ 605.39€ Ex Tax: 605.39€

Bowman EC100-3248-2

Bowman EC100-3248-2Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..

(13)

630.61€ 605.39€ Ex Tax: 605.39€

Bowman 1530-2TN1A

Bowman 1530-2TN1A The Bowman 1530-2TN1A replacement oil cooler tubestack, also known as a cooling bundle, can be used with the following Bowman marine oil coolers: FC100-3116-2. Specifications Length 278mm Brand Bowman Country of Origin United Kingdom Construction Copper Nickel Diameter 95.2mm Model 1530-2TN1A Suitability Bowman FC100-3116-2 oil coolers. ..

(10)

592.57€ Ex Tax: 592.57€

Bowman EC140-890-4

Bowman EC140-890-4 The Bowman EC140-890-4 tubular oil cooler heat exchanger is designed for cooling engine oil. Specifications Length 460mm Brand Bowman Country of Origin United Kingdom Connections Oil: 3/4" BSP female, Raw Water: straight naval brass end caps for 45mm ID hose Construction Copper nickel tube stack with naval brass end caps Diameter OD: 100mm For Maximum Horsepower ..

(14)

584.85€ Ex Tax: 584.85€

Bowman 785-5TN1A

Bowman 785-5TN1A The Bowman 785-5TN1A replacement oil cooler tubestack, also known as a cooling bundle, can be used with Bowman EC160-3198-5, EC160-3249-5 and EC160-890-5 marine oil coolers. Specifications Length 504mm Brand Bowman Country of Origin United Kingdom Diameter 76.2mm (3") Model EC160 Suitability Bowman EC160-3198-5, EC160-3249-5 & EC160-890-5 marine oil coolers. ..

(3)

555.97€ Ex Tax: 555.97€

Oil Cooler Bowman EC120 45mm

Oil Cooler Bowman EC120 45mm The Bowman EC120-890-3 tubular oil cooler heat exchanger is designed for cooling engine oil. Specifications Length 370mm Brand Bowman Country of Origin United Kingdom Connections Oil: 3/4" BSP female, Raw Water: straight naval brass end caps for 45mm ID hose Construction Copper nickel tube stack with naval brass end caps Diameter OD: 100mm For Maximum Horsepower ..

(13)

554.38€ Ex Tax: 554.38€