Propeller Shafts

Propeller Shafts

Propeller Shafts

Show:
Sort By:

Bronze Struts for Propeller Shaft 50mm

Bronze Struts for Propeller Shaft 50mmPropeller shaft Bronze struts for sailboats. To be fiberglass worked on the keel. Bronze Shaft Struts with neoprene Shaft Bearing (for Polyester & Wood-Epoxy boats)..

(4)

922.78€ 885.87€ Ex Tax: 885.87€

Brass Tube 3 mt for Stuffing Box 50mm

Brass Tube 3 mt for Stuffing Box 50mmOne side threaded Brass tubing for Stuffy Box propeller seals. All diameter tubing with 300 cm length are sold without thread..

(7)

889.92€ 854.32€ Ex Tax: 854.32€

Bronze Struts for Propeller Shaft 45mm

Bronze Struts for Propeller Shaft 45mmPropeller Shaft Support , Bronze , Starboard Strut , propeller shaft bracket. Propeller shaft Bronze struts for sailboats. To be fiberglass worked on the keel...

(3)

777.22€ 746.13€ Ex Tax: 746.13€

Stainless Steel propeller Shaft 40mm x 250cm

Stainless Steel propeller Shaft 40mm x 250cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(6)

701.90€ 673.82€ Ex Tax: 673.82€

Stainless Steel propeller Shaft 40mm x 200cm

Stainless Steel propeller Shaft 40mm x 200cmDrawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(10)

596.05€ 572.21€ Ex Tax: 572.21€

Bronze Struts for Propeller Shaft 40mm

Bronze Struts for Propeller Shaft 40mmPropeller Shaft Support , Bronze , Starboard Strut , propeller shaft bracket. Propeller shaft Bronze struts for sailboats. To be fiberglass worked on the keel....

(3)

568.58€ 545.83€ Ex Tax: 545.83€

Stainless Steel propeller Shaft 35mm x 200cm

Stainless Steel propeller Shaft 35mm x 200cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(15)

551.13€ 529.09€ Ex Tax: 529.09€

Bronze Struts for Propeller Shaft 35mm

Bronze Struts for Propeller Shaft 35mmPropeller Shaft Support , Bronze , Starboard Strut , propeller shaft bracket. Propeller shaft Bronze struts for sailboats. To be fiberglass worked on the keel.....

(13)

532.67€ 511.37€ Ex Tax: 511.37€

Stainless Steel propeller Shaft 35mm x 180cm

Stainless Steel propeller Shaft 35mm x 180cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(13)

496.05€ 476.20€ Ex Tax: 476.20€

Stainless Steel propeller Shaft 35mm x 150cm

Stainless Steel propeller Shaft 35mm x 150cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(8)

416.13€ 399.49€ Ex Tax: 399.49€

Stainless Steel propeller Shaft 30mm x 200cm

Stainless Steel propeller Shaft 30mm x 200cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(11)

386.30€ 370.85€ Ex Tax: 370.85€

Bronze struts for shaft 30mm

Bronze struts for shaft 30mmPropeller shaft Bronze struts for sailboats. To be fiberglass worked on the keel...

(13)

378.93€ 363.78€ Ex Tax: 363.78€

Stainless Steel propeller Shaft 30mm x 180cm

Stainless Steel propeller Shaft 30mm x 180cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(14)

339.17€ 325.61€ Ex Tax: 325.61€

Stainless Steel propeller Shaft 30mm x 150cm

Stainless Steel propeller Shaft 30mm x 150cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(3)

325.07€ 312.06€ Ex Tax: 312.06€

Stainless Steel propeller Shaft 25mm x 200cm

Stainless Steel propeller Shaft 25mm x 200cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(11)

322.64€ 309.74€ Ex Tax: 309.74€

Propeller shaft Bronze struts D25

Propeller shaft Bronze struts D25Propeller shaft Bronze struts for sailboats. To be fiberglass worked on the keel...

(5)

309.08€ 296.71€ Ex Tax: 296.71€

Stainless Steel propeller Shaft 25mm x 180cm

Stainless Steel propeller Shaft 25mm x 180cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(11)

272.75€ 261.84€ Ex Tax: 261.84€

Stainless Steel propeller Shaft 25mm x 150cm

Stainless Steel propeller Shaft 25mm x 150cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(14)

246.39€ 236.54€ Ex Tax: 236.54€

MG Duff Electro Eliminator for Shafts 40mm - 100mm Diameter

MG Duff Electro Eliminator for Shafts 40mm - 100mm Diameter MGDUFF electro eliminator shaft earth assembly is suitable for propeller shafts over 40mm and up to 100mm diameter. The electro eliminator has been designed to stop electrostatic radio and depth sound interference created by shaft rotation and when used in conjunction with a good cathodic protection bonding system it also aids in preventing unnecessary electrolysis. The electro eliminator mounting bar is not included. Specifications Brand MG Duff Model EE02 Suitability 40mm (1-4/7") To 100mm (4") Diameter Shafts ..

(10)

191.67€ Ex Tax: 191.67€

Stainless Steel propeller Shaft 25mm x 120cm -4% Stock Out of Stock

Stainless Steel propeller Shaft 25mm x 120cm

Stainless Steel propeller Shaft 25mm x 120cm316L stainless steel shaft, machined on the aft end for the propeller. Drawn and rebored AISI 316 Stainless Steel propeller shafts. Cone tip with propeller key...

(15)

183.00€ 175.68€ Ex Tax: 175.68€

MG Duff Electro Eliminator for Shafts up to 50mm Diameter

MG Duff Electro Eliminator for Shafts up to 50mm Diameter The MGDUFF EE01 electro eliminator shaft earth assembly is suitable for propeller shafts up to 50mm diameter. The electro eliminator has been designed to stop electrostatic radio and depth sound interference created by shaft rotation and when used in conjunction with a good cathodic protection bonding system it also aids in preventing unnecessary electrolysis. The stainless steel 316 bar and fixings provide a mount for the brush gear that can be fixed to a fabricated support arching the prop shaft or another suitable mounting position. Specifications Brand MG Duff Construction Stainless Steel 316 Bar and Fixings Model EE01..

(3)

148.14€ Ex Tax: 148.14€

Drive Force Graphite Cotton Gland Packing (19mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (19mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(7)

43.45€ Ex Tax: 43.45€

Drive Force Graphite Cotton Gland Packing (16mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (16mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(10)

30.26€ Ex Tax: 30.26€

MPM Marine Propeller Shaft Grease 1kg Tub

MPM Marine Propeller Shaft Grease 1kg Tub A propeller shaft grease from MPM, specially developed for applications on board ships. The grease has a very high resistance to water washout which makes it suitable for use in stern tubes and for lubricating rudder and rudder stock, capstans, anchor winches and winches. Specifications Size 1kg Brand MPM Unit of Sale 1kg Viscosity ISO 100 ..

(15)

19.42€ Ex Tax: 19.42€

Teflon Shaft Packing 14 x 14mm 1.5mt

Teflon Shaft Packing 14 x 14mm 1.5mtShaft packing for propeller shaft seal boxes. Sold in 1.50 meters pack. PTFE impregnated flax packing ensures a drip-free stuffing box and leak-free propeller shaft...

(3)

19.13€ 18.37€ Ex Tax: 18.37€

Drive Force Graphite Cotton Gland Packing (12mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (12mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(8)

17.48€ Ex Tax: 17.48€

greased square braided hemp for propeller shaft 10 x 10mm (Cec)

greased square braided hemp for propeller shaft 10 x 10mm (Cec)Greased square braided hemp for propellershaft assembly sealing. Package 2 m...

(13)

15.63€ 15.01€ / m Ex Tax: 15.01€

Teflon Shaft Packing 12 x 12mm 1.5mt

Teflon Shaft Packing 12 x 12mm 1.5mtShaft packing for propeller shaft seal boxes. Sold in 1.50 meters pack. PTFE impregnated flax packing ensures a drip-free stuffing box and leak-free propeller shaft...

(5)

14.35€ 13.77€ Ex Tax: 13.77€

Drive Force Graphite Cotton Gland Packing (10mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (10mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(15)

12.41€ Ex Tax: 12.41€

greased square braided hemp for propeller shaft 8 x 8mm (Cec)

greased square braided hemp for propeller shaft 8 x 8mm (Cec)Greased square braided hemp for propellershaft assembly sealing. Package 2 m...

(11)

12.51€ 12.01€ / m Ex Tax: 12.01€

Drive Force Graphite Cotton Gland Packing (8mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (8mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(15)

10.64€ Ex Tax: 10.64€

Drive Force Graphite Cotton Gland Packing (6mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (6mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(12)

9.10€ Ex Tax: 9.10€

Drive Force Graphite Cotton Gland Packing (5mm / 1 Metre Coil)

Drive Force Graphite Cotton Gland Packing (5mm / 1 Metre Coil) Drive Force graphite cotton gland packing rope is ideal for packing out shaft bearings and glands. Graphite cotton gland packing is a replacement for the old traditional graphite asbestos packing rope. The cotton material is impregnated with graphite and provides a good long term seal solutions on most applications. We sell graphite cotton gland packing either on an 8 metre roll, or per metre for maintenance. Most glands or bearings require three rings of gland packing, so a one metre length is enough to provide three rings for shafts up to 100mm (4") in diameter. Graphite cotton gland packing must be regularly lubricated with quality water resistant grease. Specifications Operating Temperature 80°C Maximum Brand ..

(3)

7.89€ Ex Tax: 7.89€

greased square braided hemp for propeller shaft mm.6x6 (Cec)

greased square braided hemp for propeller shaft mm.6x6 (Cec)Greased square braided hemp for propellershaft assembly sealing. Package 2 m...

(10)

7.50€ 7.20€ / m Ex Tax: 7.20€

Teflon Shaft Packing 5 x 5mm 1.5mt

Teflon Shaft Packing 5 x 5mm 1.5mtShaft packing for propeller shaft seal boxes. Sold in 1.50 meters pack. PTFE impregnated flax packing ensures a drip-free stuffing box and leak-free propeller shaft...

(13)

4.79€ 4.60€ Ex Tax: 4.60€