Sea water Filters

Sea water Filters

Sea water Filters

Show:
Sort By:

Maestrini Bracket Mounted Bronze Water Strainer (2-1/2" BSP Female)

Maestrini Bracket Mounted Bronze Water Strainer (2-1/2" BSP Female) The Maestrini high capacity remote mount water strainer is constructed from bronze with a polycarbonate transparent lid with O-ring seal. The polycarbonate filter basket is easy to clean and can be accessed simply by removing the four thumb screws on the top of the water strainer. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 2-1/2" BSP female inlet is located on the base of the strainer and the 2-1/2" BSP female outlet is on the side of the body. Supplied with drain plug fitted. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Height 238mm ..

(14)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Arctic Steel Strainer BISO 3" BSP with Solid Lid (2205 Stainless)

Arctic Steel Strainer BISO 3" BSP with Solid Lid (2205 Stainless) Arctic Steel BISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-BISO-300-S-A BISO raw water strainer features a 3" BSP female inlet and 3" BSP female outlet port (bottom in side out) and is direct mount. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimi..

(5)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Water Filter SISO 3"

Water Filter SISO 3" Arctic Steel SISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-SISO-300-S-A raw water strainer features 3" BSP female SISO ports (side in side out) and is free-standing / base mounted. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimise air locks due to the water flow, which changes direction hal..

(14)

1,250.00€ 1,237.50€ Ex Tax: 1,237.50€

Water Filter Guidi Mediterraneo 4"

Water Filter Guidi Mediterraneo 4"MEDITERRANEO water filter in nickel plated bronze , transparent polycarbonate cover, filter and bolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(5)

1,154.45€ 1,142.91€ Ex Tax: 1,142.91€

Water Filter Vetus 525 (205LPM / 38mm Hose)

Water Filter Vetus 525 (205LPM / 38mm Hose) Vetus 525 remote strainer suitable for filtering debris from raw water intake. The strainer has a clear lid so visual inspection of the filter is easy, although you will not need to check too often as the filter rarely needs to be serviced due to the large active surface area of the filter. This strainer has an integral mounting bracket and can be installed above or below the waterline. The 525 series strainer is made from a stainless steel housing, with a clear acrylic lid. The filter element for this strainer is made from stainless steel and can be removed and cleaned when required. Specifications Flow Rate Recommended Input: 205 LPM, Maximum Input: 525 LPM Height 225mm (8.85") ..

(10)

1,100.00€ 1,089.00€ Ex Tax: 1,089.00€

Water Filter Vetus 1900 3"

Water Filter Vetus 1900 3" Vetus 1900 remote strainer suitable for filtering debris from raw water intake. The strainer has a clear lid so visual inspection of the filter is easy, although you will not need to check too often as the filter rarely needs to be serviced due to the large active surface area of the filter. This strainer has integral mounting brackets to be installed above the waterline. The 1900 series is a high capacity strainer with a threaded BSP inlet and outlet. The strainer is made from a polyethylene housing, with a clear acrylic lid. The filter element for this strainer is made from stainless steel and can be removed and cleaned when required. Specifications Flow Rate Recommended Input: 820 LPM, Maximum Input: 1900 LPM Height 306mm ..

(3)

992.20€ 982.28€ Ex Tax: 982.28€

Water Filter Vetus 1900 2 1/2"

Water Filter Vetus 1900 2 1/2" Vetus 1900 remote strainer suitable for filtering debris from raw water intake. The strainer has a clear lid so visual inspection of the filter is easy, although you will not need to check too often as the filter rarely needs to be serviced due to the large active surface area of the filter. This strainer has integral mounting brackets to be installed above the waterline. The 1900 series is a high capacity strainer with a threaded BSP inlet and outlet. The strainer is made from a polyethylene housing, with a clear acrylic lid. The filter element for this strainer is made from stainless steel and can be removed and cleaned when required. Specifications Flow Rate Recommended Input: 570 LPM, Maximum Input: 1320 LPM Height 306mm ..

(6)

952.20€ 942.68€ Ex Tax: 942.68€

Bronze Water Filter Maestrini (2" BSP Female)

Bronze Water Filter Maestrini (2" BSP Female) The Maestrini high capacity remote mount water strainer is constructed from bronze with a polycarbonate transparent lid with O-ring seal. The polycarbonate filter basket is easy to clean and can be accessed simply by removing the four thumb screws on the top of the water strainer. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 2" BSP female inlet is located on the base of the strainer and the 2" BSP female outlet is on the side of the body. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Flow Rate 20,400plh at 0.1 Bar, 69,000 LPH at 1 Bar Height..

(10)

950.00€ 940.50€ Ex Tax: 940.50€

Sea water Filter Guidi Mediterraneo 3"

Sea water Filter Guidi Mediterraneo 3"MEDITERRANEO water filter in nickel plated bronze , transparent polycarbonate cover, filter and bolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/ TO/97. Brass and Stainless Steel R.I.Na. approved seawater strainer. For large capacity pumps and engine cooling. ..

(15)

875.00€ 866.25€ Ex Tax: 866.25€

Water Filter BISO 2.5" BSP

Water Filter BISO 2.5" BSP Arctic Steel BISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-BISO-250-S-A BISO raw water strainer features a 2.5" BSP female inlet and 2.5" BSP female outlet port (bottom in side out) and is direct mount. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimise air locks due to the water flow,..

(3)

848.54€ 840.05€ Ex Tax: 840.05€

Water Filter Perko 0493007PLB

Water Filter Perko 0493007PLB Perko water strainers are designed for easy installation, inspection and cleaning, with a marine grade stainless steel 316 water strainer filter basket. The Perko 0493007PLB intake water strainer features a bronze casting and mounting lugs cast into both sides to assure universal mounting. The four outside mounted tie rods secure the strainer caps. Strainer screen size is 0.077" (46% open area). Hinged lugs for the cast bronze water strainer cover permit easy removal and cleaning of the strainer basket. Each Perko 0493007PLB water strainer features a drain plug in the bottom casting. Specifications Height 254mm (10") Width 140mm (5-1/2") Brand Perk..

(10)

837.91€ 829.53€ Ex Tax: 829.53€

Water Filter SISO 2"

Water Filter SISO 2" Arctic Steel SISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-SISO-200-C-A raw water strainer features 2" BSP female SISO ports (side in side out) and is free-standing / base mounted. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimise air locks due to the water flow, which changes direction hal..

(10)

830.06€ 821.76€ Ex Tax: 821.76€

Seawater Filters Artic Steel BISO 2" BSP with Clear Lid (2205 Stainless)

Seawater Filters Artic Steel BISO 2" BSP with Clear Lid (2205 Stainless) Arctic Steel BISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-BISO-200-C-A BISO raw water strainer features a 2" BSP male inlet and 2" BSP female outlet port (bottom in side out) and is direct mount. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to m..

(7)

828.51€ 820.23€ Ex Tax: 820.23€

Water Filtor SISO 1.5"

Water Filtor SISO 1.5" Arctic Steel SISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-SISO-150-S-A raw water strainer features 1.5" BSP female SISO ports (side in side out) and is free-standing / base mounted. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimise air locks due to the water flow, which changes direction..

(9)

814.88€ 806.73€ Ex Tax: 806.73€

Arctic Steel Strainer SISO 1.25" BSP with Clear Lid (2205 Stainless)

Arctic Steel Strainer SISO 1.25" BSP with Clear Lid (2205 Stainless) Arctic Steel SISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-SISO-125-C-A raw water strainer features 1.25" BSP female SISO ports (side in side out) and is free-standing / base mounted. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimise air locks..

(9)

794.88€ 786.93€ Ex Tax: 786.93€

Sea water Filter Guidi Mediterraneo 2"1/2

Sea water Filter Guidi Mediterraneo 2"1/22" Water strainer "Mediterraneo" series with polycarbonate cover MEDITERRANEO water filter in nickel plated bronze , transparent polycarbonate cover, filter and bolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/ TO/97. Brass and Stainless Steel R.I.Na. approved seawater strainer. For large capacity pumps and engine cooling. ..

(13)

646.62€ 640.15€ Ex Tax: 640.15€

Sea water Filter Guidi Mediterraneo 2"

Sea water Filter Guidi Mediterraneo 2"MEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. Brass and Stainless Steel R.I.Na. approved seawater strainer. For large capacity pumps and engine cooling. ..

(7)

613.91€ 607.77€ Ex Tax: 607.77€

Water Filter Guidi Mediterraneo 1 1/2 inch

Water Filter Guidi Mediterraneo 1 1/2 inchMEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(4)

603.44€ 597.40€ Ex Tax: 597.40€

Water Filter SISO 1"

Water Filter SISO 1" Arctic Steel SISO water strainer with superior AISI Duplex 2205 cast stainless steel construction and electro-polished finish. Casting their strainers delivers a one-piece body so there are no welding weak-points to be found on Arctic Steel strainers. The electro-polish removes carbon and impurities, enhancing corrosion resistance and giving a chromium rich shine. The WS-SISO-100-C-A raw water strainer features 1" BSP female SISO ports (side in side out) and is free-standing / base mounted. A full height basket is utilised, with a high-impact resistant ABS construction. Using a basket that is the full height of the strainer maximise the filtration area and coupled with offset ports which create a swirling water flow, allows for better filtration and longer periods between cleaning. The inlet and outlet design also acts to minimise air locks due to the water flow, which changes direction hal..

(6)

541.85€ 536.43€ Ex Tax: 536.43€

Maestrini Bracket Mounted Brass Water Strainer (1-1/4" BSP Female)

Maestrini Bracket Mounted Brass Water Strainer (1-1/4" BSP Female) The Maestrini high capacity remote mount water strainer is constructed from brass with a polycarbonate transparent lid with O-ring seal. The polycarbonate filter basket is easy to clean and can be accessed simply by removing the four thumb screws on the top of the water strainer. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 1-1/4" BSP female inlet port is located on the base of the strainer and the 1-1/4" BSP female outlet port is on the side of the body. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Flow Rate 8,400 LPH at 0.1 Bar, 28,400 LPH at 1 Bar ..

(10)

528.96€ 523.67€ Ex Tax: 523.67€

Maestrini Bracket Mounted Brass Water Strainer (1-1/2" BSP Female)

Maestrini Bracket Mounted Brass Water Strainer (1-1/2" BSP Female) The Maestrini high capacity remote mount water strainer is constructed from brass with a polycarbonate transparent lid with O-ring seal. The polycarbonate filter basket is easy to clean and can be accessed simply by removing the four thumb screws on the top of the water strainer. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 1-1/2" BSP female inlet is located on the base of the strainer and the 1-1/2" BSP female outlet is on the side of the body. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Flow Rate 10,400 LPH at 0.1 Bar, 35,200 LPH at 1 Bar ..

(4)

528.96€ 523.67€ Ex Tax: 523.67€

Bronze Hull Mounted Water Strainer (1-1/2" BSP / 250mm x 90mm)

Bronze Hull Mounted Water Strainer (1-1/2" BSP / 250mm x 90mm) Cast bronze raw water intake strainer with stainless steel filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable with wingnuts so the filter gauze can be serviced or replaced easily. Ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Height 250mm (9.8") Strainer Design Hull Mounted ..

(4)

523.87€ 518.63€ Ex Tax: 518.63€

Bronze Hull Mounted Water Strainer (1-1/4" BSP / 250mm x 90mm)

Bronze Hull Mounted Water Strainer (1-1/4" BSP / 250mm x 90mm) Cast bronze raw water intake strainer with stainless steel filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable with wingnuts so the filter gauze can be serviced or replaced easily. Ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Height 250mm (9.8") Strainer Design Hull Mounted ..

(12)

512.83€ 507.70€ Ex Tax: 507.70€

Seawater Filter Seaflow (1-1/2" / 200LPM)

Seawater Filter Seaflow (1-1/2" / 200LPM) Seaflow 1-/12" raw water strainer suitable for bulkhead mounting, features a rotating stainless steel bracket for easy installation and a transparent cover to allow easy inspection of the strainer. Strainer can handle 200LPM and also comes with a stainless steel net. Specifications Flow Rate 200 LPM Height 301mm Width Strainer: 191mm / Bracket: 204mm Brand Seaflow Strainer Design Remote Bracket Mount Thread Gender ..

(7)

505.98€ 500.92€ Ex Tax: 500.92€

Seawater Filter Seaflow (2" / 300LPM)

Seawater Filter Seaflow (2" / 300LPM) Seaflow 2" raw water strainer suitable for bulkhead mounting, features a rotating stainless steel bracket for easy installation and a transparent cover to allow easy inspection of the strainer. Strainer can handle 300LPM and also comes with a stainless steel net. Specifications Flow Rate 300 LPM Height 301mm Width Strainer: 191mm / Bracket: 204mm Brand Seaflow Strainer Design Remote Bracket Mount Thread Gender F..

(14)

483.57€ 478.73€ Ex Tax: 478.73€

Sea water Filter Vetus FTR 1320 2 1/2"

Sea water Filter Vetus FTR 1320 2 1/2"Polypropylene body seawater Vetus FTR1320 strainer with adjustable Stainless Steel mounting brackets. For pumps and engine cooling. ..

(14)

411.74€ 407.63€ Ex Tax: 407.63€

Maestrini Bracket Mounted Brass Water Strainer (3/4" BSP Female)

Maestrini Bracket Mounted Brass Water Strainer (3/4" BSP Female) The Maestrini high capacity remote mount water strainer is constructed from brass with a polycarbonate transparent lid with O-ring seal. The stainless steel 316 filter basket is easy to clean and can be accessed simply by removing the four thumb screws on the top of the water strainer. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 3/4" BSP female inlet is located on the base of the strainer and the 3/4" BSP female outlet is on the side of the body. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Flow Rate 4,000 LPH at 0.1 Bar, 13,500 LPH at 1 Bar ..

(11)

410.78€ 406.68€ Ex Tax: 406.68€

Maestrini Bracket Mounted Brass Water Strainer (1" BSP Female)

Maestrini Bracket Mounted Brass Water Strainer (1" BSP Female) The Maestrini high capacity remote mount water strainer is constructed from brass with a polycarbonate transparent lid with O-ring seal. The polycarbonate filter basket is easy to clean and can be accessed simply by removing the four thumb screws on the top of the water strainer. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 1" BSP female inlet is located on the base of the strainer and the 1" BSP female outlet is on the side of the body. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Flow Rate 5,000 LPH at 0.1 Bar, 16,800 LPH at 1 Bar ..

(9)

408.25€ 404.17€ Ex Tax: 404.17€

Bronze Hull Mounted Water Strainer (1" BSP / 210mm x 85mm)

Bronze Hull Mounted Water Strainer (1" BSP / 210mm x 85mm) Cast bronze raw water intake strainer with stainless steel filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable with wingnuts so the filter gauze can be serviced or replaced easily. Ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Height 210mm (8-1/4") Strainer Design Hull Mounted ..

(15)

403.66€ 399.62€ Ex Tax: 399.62€

Sea water Filter Vetus FTR 1320 2"

Sea water Filter Vetus FTR 1320 2"Polypropylene body seawater Vetus FTR1320 strainer with adjustable Stainless Steel mounting brackets. For pumps and engine cooling. ..

(9)

399.91€ 395.92€ Ex Tax: 395.92€

Sea water Filter Vetus Ftr1320 11/2

Sea water Filter Vetus Ftr1320 11/2Polypropylene body seawater Vetus FTR1320 strainer with adjustable Stainless Steel mounting brackets. For pumps and engine cooling. ..

(7)

362.64€ 359.01€ Ex Tax: 359.01€

Maestrini DZR Brass Hull Mounted Water Strainer (1-1/4" BSP)

Maestrini DZR Brass Hull Mounted Water Strainer (1-1/4" BSP) Maestrini cast DZR Brass raw water intake strainer with plastic filter gauze. This "AMALFI" series water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable so the filter gauze can be serviced or replaced easily. The 1-1/4" BSP ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Specifications Height 231mm Brand Maestrini Strainer Design Hull Mounted Thread Gender Female|Male ..

(10)

358.72€ 355.14€ Ex Tax: 355.14€

Maestrini DZR Brass Hull Mounted Water Strainer (1" BSP)

Maestrini DZR Brass Hull Mounted Water Strainer (1" BSP) Maestrini cast DZR Brass raw water intake strainer with plastic filter gauze. This "AMALFI" series water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable so the filter gauze can be serviced or replaced easily. The 1" BSP ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Specifications Height 228.5mm Brand Maestrini Strainer Design Hull Mounted Thread Gender Female|Male ..

(3)

345.21€ 341.75€ Ex Tax: 341.75€

Bronze Hull Mounted Water Strainer (3/4" BSP / 150mm x 57mm)

Bronze Hull Mounted Water Strainer (3/4" BSP / 150mm x 57mm) Cast bronze raw water intake strainer with stainless steel filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable so the filter gauze can be serviced or replaced easily. Ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Height 150mm (5.9") Strainer Design Hull Mounted ..

(8)

322.56€ 319.33€ Ex Tax: 319.33€

Maestrini Bronze Hull Mounted Water Strainer (1" BSP)

Maestrini Bronze Hull Mounted Water Strainer (1" BSP) Maestrini bronze raw water intake strainer 'AMALFI' features a clear cap for easy inspection of the filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the Maestrini 2009F strainer is removable so the filter gauze can be serviced or replaced easily. The 1" BSP ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Specifications Series AMALFI Brand Maestrini Strainer Design Hull Mounted Construction Bronze ..

(9)

307.69€ 304.62€ Ex Tax: 304.62€

Sea water Filter Seaflow (2-1/2" / 550LPM)

Sea water Filter Seaflow (2-1/2" / 550LPM) Seaflow 2-1/2" raw water strainer suitable for bulkhead mounting, features a rotating stainless steel bracket for easy installation and a transparent cover to allow easy inspection of the strainer. Strainer can handle 550LPM and also comes with a stainless steel net. Specifications Flow Rate 550 LPM Height 301mm Width Strainer: 191mm / Bracket: 204mm Brand Seaflow Strainer Design Remote Bracket Mount Thread Gender ..

(13)

303.57€ 300.54€ Ex Tax: 300.54€

Strainer in 316 Stainless for Water Filters BISO 6"

Strainer in 316 Stainless for Water Filters BISO 6" Arctic Steel 316 stainless steel basket is the full height of the strainer to ensure superior filtering. The WS-BISO600-011-2 strainer basket features 2mm perforations and is suitable for 6" BISO water strainer models (bottom in side out). Specifications Brand Arctic Steel Length 354mm Construction 316 Stainless Steel Diameter Top OD: 298mm, Bottom OD: 231mm, ID: 209mm Depth 0.8mm ..

(6)

296.50€ 293.53€ Ex Tax: 293.53€

Maestrini Bronze Hull Mounted Water Strainer (3/4" BSP)

Maestrini Bronze Hull Mounted Water Strainer (3/4" BSP) Maestrini bronze raw water intake strainer 'AMALFI' features a clear cap for easy inspection of the filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the Maestrini 2009E strainer is removable so the filter gauze can be serviced or replaced easily. The 3/4" BSP ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Specifications Series AMALFI Brand Maestrini Strainer Design Hull Mounted Construction Bronz..

(12)

293.07€ 290.14€ Ex Tax: 290.14€

Sea water Filter Guidi Mediterraneo 1"

Sea water Filter Guidi Mediterraneo 1"MEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(10)

264.95€ 262.30€ Ex Tax: 262.30€

Sea water Filter Guidi IONIO 1 "1/2

Sea water Filter Guidi IONIO 1 "1/2IONIO water filterfilter and bolts in s.s. AISI 316 L. Rina approved, certificate no.MAC/13997/1/TO/97. ..

(5)

256.78€ Ex Tax: 256.78€

Sea water Filter Guidi IONIO 1 "1/4

Sea water Filter Guidi IONIO 1 "1/4IONIO water filterfilter and bolts in s.s. AISI 316 L. Rina approved, certificate no.MAC/13997/1/TO/97. ..

(3)

235.67€ 233.31€ Ex Tax: 233.31€

Sea water Filter Guidi Mediterraneo 1 1/4"

Sea water Filter Guidi Mediterraneo 1 1/4"MEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(10)

234.09€ 231.74€ Ex Tax: 231.74€

Sea water Filter Guidi IONIO 1"

Sea water Filter Guidi IONIO 1"IONIO water filterfilter and bolts in s.s. AISI 316 L. Rina approved, certificate no.MAC/13997/1/TO/97. ..

(8)

223.63€ 221.40€ Ex Tax: 221.40€

Sherwood Raw Water Strainer (20 Mesh / 1-1/2" NPT)

Sherwood Raw Water Strainer (20 Mesh / 1-1/2" NPT) Sherwood 18029 water strainer for marine raw water intake. The strainer body is made from non corrosive materials making it durable and reliable, and is clear so you can clearly check the filter bowl. The filter basket is made from stainless steel. The strainer is lightweight and can be mounted with an optional mounting bracket. It offers full flow filtering with low back pressure to provide optimum performance. The Sherwood strainer is easy to clean and service. Specifications Height 206.375mm (8.125") Width 127mm (5") Brand Sherwood Strainer Design Rem..

(6)

222.05€ 219.83€ Ex Tax: 219.83€

Sherwood Raw Water Strainer (20 Mesh / 1-1/4" NPT)

Sherwood Raw Water Strainer (20 Mesh / 1-1/4" NPT) Sherwood 18016 water strainer for marine raw water intake. The strainer body is made from non corrosive materials making it durable and reliable, and is clear so you can clearly check the filter bowl. The filter basket is made from stainless steel. The strainer is lightweight and can be mounted with an optional mounting bracket. It offers full flow filtering with low back pressure to provide optimum performance. The Sherwood strainer is easy to clean and service. Specifications Height 177.8mm (7") Width 127mm (5") Brand Sherwood Strainer Design Remote Br..

(5)

209.67€ 207.57€ Ex Tax: 207.57€

Sea water Filter Guidi Mediterraneo 3/4"

Sea water Filter Guidi Mediterraneo 3/4"MEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(7)

199.05€ 197.06€ Ex Tax: 197.06€

Sea water Filter Guidi IONIO 3/4"

Sea water Filter Guidi IONIO 3/4"IONIO water filterfilter and bolts in s.s. AISI 316 L. Rina approved, certificate no.MAC/13997/1/TO/97. ..

(3)

191.78€ Ex Tax: 191.78€

Sherwood Raw Water Strainer (20 Mesh / 1" NPT)

Sherwood Raw Water Strainer (20 Mesh / 1" NPT) Sherwood 18005 water strainer for marine raw water intake. The strainer body is made from non corrosive materials making it durable and reliable, and is clear so you can clearly check the filter bowl. The filter basket is made from stainless steel. The strainer is lightweight and can be mounted with an optional mounting bracket. This raw water strainer offers full flow filtering with low back pressure to provide optimum performance. The Sherwood strainer is easy to clean and service. Specifications Height 161.3mm (6.35") Width 127mm (5") Brand Sherwood Strainer Design ..

(5)

188.31€ 186.43€ Ex Tax: 186.43€

Bronze Hull Mounted Water Strainer (1/2" BSP / 140mm x 55mm)

Bronze Hull Mounted Water Strainer (1/2" BSP / 140mm x 55mm) Cast bronze raw water intake strainer with plastic filter gauze. This water strainer mounts on the hull of the boat and filters the raw water taken in on its way to the raw water cooling system. The top of the strainer is removable so the filter gauze can be serviced or replaced easily. Ports are located on the bottom of the strainer (inlet) and on the side of the strainer (outlet). Height 140mm (5-1/2") Strainer Design Hull Mounted ..

(6)

186.52€ 184.65€ Ex Tax: 184.65€

Sherwood Water Strainer Mounting Bracket (1-1/2" NPT)

Sherwood Water Strainer Mounting Bracket (1-1/2" NPT) The Sherwood mounting bracket is designed for Sherwood non-metallic water inlet strainers. This bracket will suit the Sherwood water strainer model with 1.5" threaded ports. Specifications Brand Sherwood Strainer Spares Brackets & Kits Construction Stainless Steel ..

(11)

171.20€ 169.49€ Ex Tax: 169.49€

Maestrini Bracket Mounted Brass Water Strainer (1/2" BSP / Clear Lid)

Maestrini Bracket Mounted Brass Water Strainer (1/2" BSP / Clear Lid) The Maestrini high capacity remote mount water strainer is constructed from brass with a polycarbonate transparent lid with O-ring seal. The polypropylene filter basket is easy to clean and can be accessed simply by removing the lid. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 1/2" BSP female inlet is located on the base of the strainer and the 1/2" BSP female outlet is on the side of the body. Specifications Flow Rate 2,900 LPH at 0.1 Bar, 9,550 LPH at 1 Bar Height 136.5mm Series Pisa Width ..

(5)

167.90€ 166.22€ Ex Tax: 166.22€

Maestrini Bracket Mounted Brass Water Strainer (3/4" BSP / Metal Lid)

Maestrini Bracket Mounted Brass Water Strainer (3/4" BSP / Metal Lid) The Maestrini high capacity remote mount water strainer is constructed from brass with a metal lid with O-ring seal. The polypropylene filter basket is easy to clean and can be accessed simply by removing the lid. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 3/4" BSP female inlet is located on the base of the strainer and the 3/4" BSP female outlet is on the side of the body. Specifications Approvals Fire Tested in Accordance to ISO 7840, Annex A. Complies to Seafish Standards. Flow Rate 4,200 LPH at 0.1 Bar, 13,900 LPH at 1 Bar Height ..

(13)

162.89€ 161.26€ Ex Tax: 161.26€

Maestrini Bracket Mounted Brass Water Strainer (3/4" BSP / Clear Lid)

Maestrini Bracket Mounted Brass Water Strainer (3/4" BSP / Clear Lid) The Maestrini high capacity remote mount water strainer is constructed from brass with a polycarbonate transparent lid with O-ring seal. The polypropylene filter basket is easy to clean and can be accessed simply by removing the lid. The Maestrini remote water strainer is designed to be bracket mounted through the side using the integral mounting lugs. The 3/4" BSP female inlet is located on the base of the strainer and the 3/4" BSP female outlet is on the side of the body. Specifications Flow Rate 4,200 LPH at 0.1 Bar, 13,900 LPH at 1 Bar Height 136.5mm Series Pisa Width ..

(5)

162.89€ 161.26€ Ex Tax: 161.26€

Sea water Filter Guidi Mediterraneo 3/8"

Sea water Filter Guidi Mediterraneo 3/8"MEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(13)

149.82€ Ex Tax: 149.82€

Sea water Filter Guidi Mediterraneo 1/2"

Sea water Filter Guidi Mediterraneo 1/2"MEDITERRANEO water filterin nickel plated bronze , transparent polycarbonate cover, filter andbolts in s.s. AISI 316 L. Rina approved, certificate no. MAC/13997/1/TO/97. ..

(15)

149.82€ Ex Tax: 149.82€

Vetus Ftr330 filter 1 1/2

Vetus Ftr330 filter 1 1/2Polypropylene body seawater strainer for pumps and engine cooling. ..

(6)

128.21€ Ex Tax: 128.21€

Sherwood Water Strainer Bowl (1", 1-1/4" & 1-1/2")

Sherwood Water Strainer Bowl (1", 1-1/4" & 1-1/2") The Sherwood replacement see through bowl is suitable for Sherwood sea water strainers. This strainer bowl fits Sherwood strainer models with 1", 1-1/4" and 1-1/2" ports. Specifications Height 106mm (4.2") Brand Sherwood Strainer Spares Bases & Bowls Construction Plastic Diameter 104.1mm (4.1") ..

(9)

128.01€ 126.73€ Ex Tax: 126.73€

Water Filter Vetus FTR330 25mm

Water Filter Vetus FTR330 25mmPolypropylene body seawater strainer for pumps and engine cooling. ..

(8)

126.45€ Ex Tax: 126.45€

Vetus filter Ftr330 1 1/4

Vetus filter Ftr330 1 1/4Polypropylene body seawater strainer for pumps and engine cooling. ..

(8)

125.81€ Ex Tax: 125.81€

Spare Filter for Guidi Mediterraneo 2 1/2"

Spare Filter for Guidi Mediterraneo 2 1/2"Spares for water strainers. Stainless steel basket for filter Mediterraneo ..

(5)

126.78€ 117.01€ Ex Tax: 117.01€