Spares and Accessories for Hydraulic Steering

Spares and Accessories for Hydraulic Steering

Spares and Accessories for Hydraulic Steering

Show:
Sort By:

Vetus Hydraulic Steering Pressure Relief Valve (18mm)

Vetus Hydraulic Steering Pressure Relief Valve (18mm) The Vetus HS42B pressure relief valve is suitable for use in marine hydraulic steering systems. This Vetus pressure relief valve (PRV) comes complete with fittings. Brand Vetus Diameter 18mm Model HS42B ..

(14)

808.20€ 800.12€ Ex Tax: 800.12€

Vetus Nylon Hydraulic Steering Hose (10mm OD / 30 Metres)

Vetus Nylon Hydraulic Steering Hose (10mm OD / 30 Metres) This marine hydraulic steering hose from Vetus is made from nylon and is primarily designed for use with Vetus cylinders and helm pumps. The steering hose has an outside diameter of 10mm and measures 30 metres in length. The hydraulic steering hose requires a support sleeve for installation. Specifications Temperature Range -40ºC to +100ºC (-40ºF to +212ºF) Working Pressure 85 bar (1250 psi) Brand Vetus Unit of Sale 30 Metre Coil Bending Radius 60mm (2-3/8") ..

(15)

682.20€ 675.38€ Ex Tax: 675.38€

Vetus Hydraulic Steering Non-Return Valve with Bypass Valve (18mm)

Vetus Hydraulic Steering Non-Return Valve with Bypass Valve (18mm) The Vetus HS74B single non-return valve, with by-pass, comes complete with fittings. Brand Vetus Model HS74B Spares and Accessories Non Return Valve with Bypass Spare parts ..

(10)

668.00€ 661.32€ Ex Tax: 661.32€

Non-Return Valve Vetus for Double Station ( MT230-MT345 Cylinders)

Non-Return Valve Vetus for Double Station ( MT230-MT345 Cylinders)Spare parts and accessories for Vetus hydraulic steering systems.Non-return valves are used also for dual station.Recess flanges are Stainless Steel and fits old type Vetus pumps.The By-Pass faucet is mounted on hydraulic system to go at the helm. ..

(12)

490.73€ 485.83€ Ex Tax: 485.83€

Hydraulic Hose Vetus 12mm x 15mt

Hydraulic Hose Vetus 12mm x 15mt This marine hydraulic steering hose from Vetus is made from nylon and is primarily designed for use with Vetus cylinders and helm pumps. The steering hose has an outside diameter of 12mm and measures 15 metres in length. The hydraulic steering hose requires a support sleeve for installation. Specifications Temperature Range -40ºC to +100ºC (-40ºF to +212ºF) Working Pressure 85 bar (1250 psi) Brand Vetus Unit of Sale 15 Metre Coil Bending Radius 75mm (3") Bu..

(9)

479.16€ 474.37€ Ex Tax: 474.37€

Stainless bar for joining 2 Outboards up to 350hp Over the Hydraulic Steering

Stainless bar for joining 2 Outboards up to 350hp Over the Hydraulic SteeringStainless steel bar for single or dual cylinder type UC68-OBS, UC132-OBS, UC146-OBS and UC146-OBF Drake and with mechanicalsteering. Adjustable from 650 up to 850 mm. ..

(10)

422.50€ 418.27€ Ex Tax: 418.27€

Spare Terminal Vetus HS210 for cylinders MTC125 and MTC175

Spare Terminal Vetus HS210 for cylinders MTC125 and MTC175 The Vetus HS210 steering rod end is suitable for use with the MTC125 to MTC175 steering rams such as the Vetus MTC125-1. The steering ram rod end features a M20 x 15 thread is has a stainless steel 316 construction. Brand Vetus Model HS210 Spares and Accessories Ram Rod End ..

(8)

400.41€ 396.40€ Ex Tax: 396.40€

Coupling Bar Mavi Mare for 2 Outboards ( Contrarotating)

Coupling Bar Mavi Mare for 2 Outboards ( Contrarotating)Tie bar for twin engine with double cylinder ..

(10)

371.87€ 368.15€ Ex Tax: 368.15€

Hydraulic Hose Vetus 10mm x 15mt

Hydraulic Hose Vetus 10mm x 15mt This marine hydraulic steering hose from Vetus is made from nylon and is primarily designed for use with Vetus cylinders and helm pumps. The steering hose has an outside diameter of 10mm and measures 15 metres in length. The hydraulic steering hose requires a support sleeve for installation. Specifications Temperature Range -40ºC to +100ºC (-40ºF to +212ºF) Working Pressure 85 bar (1250 psi) Brand Vetus Unit of Sale 15 Metre Coil Bending Radius 60mm (2-3/8") ..

(10)

360.36€ 356.76€ Ex Tax: 356.76€

Vetus Double Station Non-Return Valve For MTC52 & MTC175

Vetus Double Station Non-Return Valve For MTC52 & MTC175Spare parts and accessories for Vetus hydraulic steering systems. Non-return valves are used also for dual station. Recess flanges are Stainless Steel and fits old type Vetus pumps. The By-Pass faucet is mounted on hydraulic system to go at the helm. ..

(4)

330.46€ 327.15€ Ex Tax: 327.15€

Marine Hydraulic tube Flex Sae 100 R7 9.7 x 16mm x 30mt

Marine Hydraulic tube Flex Sae 100 R7 9.7 x 16mm x 30mtResistant, flexible and lightweight SAE100 R7 flex tubing. For steering systems, gangways etc. ..

(3)

329.48€ 326.19€ Ex Tax: 326.19€

Coupling Bar Mavi Mare for 2 Outboards

Coupling Bar Mavi Mare for 2 OutboardsTie bar for twin engine with single cylinder ..

(13)

328.43€ 325.14€ Ex Tax: 325.14€

Vetus Limit Switches for Electro Hydraulic Pumps (Per Pair)

Vetus Limit Switches for Electro Hydraulic Pumps (Per Pair) These Vetus limit switches are designed to shut off the range of electro hydraulic pumps at a set point to avoid loading the hydraulic ram beyond its capabilities. This is vital for preventing damage to the hydraulic ram and the relevant fittings. Supplied as set of 2 pieces. Brand Vetus ..

(3)

277.20€ 274.43€ Ex Tax: 274.43€

Adjustable steering wheel Ultraflex X 72

Adjustable steering wheel Ultraflex X 72Adjustable steering wheel systems X 72, tilt range of 60° and five locking positions, suitable on front mount helms. For pump UP25F, UP28F, UP33F, UP39F,UPF45F and Silversteer High perfomance SilverSteer steering system for more than 300 HP outboards.A  A  The engine connection is made of high-strength Stainless-Steel (Ultrabolt).A  A A  Composed by separated sold pieces:A  A  1 UP28F-SVS Pump (Cod MTM 4655501) with 4.6 wheel turns or 1 UP33F-SVS Pump (Cod MTM 4655502) with 3.9 wheel turns. The pumps are complete with non-return valve and overpressure protection valve.A  A A  1 UC130/1-SVS Cylinder (Cod MTM 4655511) or 1 UC130/2-SVS Cylinder (Cod MTM 4655512); 1 Hose Kit OB-SVS; 2 Lt Hydraulic oil.A  A A  The two cylinders are different in the engine connection:A  A A  - UC130/1 (Cod MTM 4655511) is made for: Mercury 2 e 4ST from 135 to 300 HP - Yamaha 4ST from 150 to 350 HP - Honda 4ST from 150 to 250 HP - Suzuki 4ST from 100 to 175 HP;A  A  A..

(7)

253.37€ 250.83€ Ex Tax: 250.83€

kit 2 Hydraulic hoses Ultraflex 9mt R7 5/16 with two terminals

kit 2 Hydraulic hoses Ultraflex 9mt R7 5/16 with two terminalsKit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. ..

(12)

238.11€ 235.73€ Ex Tax: 235.73€

Connection Arm for Ultraflex UC128-OBF/1

Connection Arm for Ultraflex UC128-OBF/1Bar rigth arm for UC128-OBF/1 art. 4344728 ..

(10)

232.15€ 229.83€ Ex Tax: 229.83€

kit 2 Hydraulic hoses Ultraflex 9mt R7 5/16 with one terminal

kit 2 Hydraulic hoses Ultraflex 9mt R7 5/16 with one terminalKit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. ..

(15)

228.41€ 226.12€ Ex Tax: 226.12€

Fittings for a second Hydraulic Steering (Ultraflex)

Fittings for a second Hydraulic Steering (Ultraflex)Fittings for a second steering station or autopilot installationit includes all necessary fittings and 8 m (26.3 ft) of 3/8” dia. nylon tube for the compensating line ..

(6)

198.24€ Ex Tax: 198.24€

kit 2 Hydraulic hoses Ultraflex 6mt R7 5/16 with one terminal

kit 2 Hydraulic hoses Ultraflex 6mt R7 5/16 with one terminalKit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. ..

(9)

195.83€ 193.88€ Ex Tax: 193.88€

Vetus Fitting Kit for Dual Non Return Valve (8mm Fittings)

Vetus Fitting Kit for Dual Non Return Valve (8mm Fittings) The Vetus KITK30 8mm fitting kit for dual non-return valve is for use with K30-140B and MTC3008. Brand Vetus Model KITK30 Spares and Accessories Non Return Valve Block Fittings ..

(6)

190.08€ 188.18€ Ex Tax: 188.18€

kit 2 hoses 8.5mt R7 5/16 Hydraulic Steerings Ultraflex

kit 2 hoses 8.5mt R7 5/16 Hydraulic Steerings UltraflexKit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. ..

(12)

186.23€ 184.37€ Ex Tax: 184.37€

Vetus Service Kit DM11001 for HTP and HTPR Hydraulic Steering Pumps

Vetus Service Kit DM11001 for HTP and HTPR Hydraulic Steering Pumps The Vetus DM11001 service kit is suitable use with all Vetus HTP and HTPR hydraulic steering pumps (HTP20, HTP30, HTP42, HTP20R, HTP30R and HTP42R). The service/repair kit contains: a pump gasket, 11x O-rings, shaft seal, 2x 90 degree compression elbow fittings, 2x straight compression fittings, filler cap and a drain screw. Brand Vetus Contents Pump Gasket, 11 O-Rings, Shaft Seal, 2 Compression Elbows, 2 Straight Compression Fittings, Filler Cap & Drain Screw ..

(12)

184.80€ 182.95€ Ex Tax: 182.95€

kit 2 hoses 6.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)

kit 2 hoses 6.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. ..

(13)

181.78€ Ex Tax: 181.78€

Stainless Steel Flange for Vetus Pumps ( 78mm)

Stainless Steel Flange for Vetus Pumps ( 78mm) The Vetus HTPF adaptor flange is for use with the HTP pump and is constructed from stainless steel. The adaptor flange has a recess depth of 78mm and is supplied with a set of 4 stainless steels nuts, washers and bolts. Brand Vetus Model HTPF2 Spares and Accessories Helm Mounting Flange ..

(15)

176.22€ 174.46€ Ex Tax: 174.46€

Hydraulic Steering Tank Vetus HTANK

Hydraulic Steering Tank Vetus HTANK This transparent tank can be installed with all Vetus steering pumps up to 89 cm³ per revolution. It is also recommended for electro-hydraulic hatch lifters, when operating more than one cylinder. It has a capacity of about 200 cm³ and is supplied with a large vented screw cap, for easy filling and a mounting bracket. The tank comes complete with 1 metre of 8mm diameter hose, two matching hose clips, one G 1/4" and one G 3/8" nylon hose pillar. Height 120mm (4.7") Width 63mm (Excluding bracket) ..

(3)

176.22€ 174.46€ Ex Tax: 174.46€

kit 2 hoses 6mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)

kit 2 hoses 6mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. ..

(15)

170.87€ Ex Tax: 170.87€

kit 2 hoses 7.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)

kit 2 hoses 7.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. Nautech1 steering system kit for outboards:A A  Mercury 2 and 4ST from 100 to 300 HP - Yamaha 4ST from F70 to F150 and from F200 a F300 - Honda 4ST 75/90/115A and from 135 to 250 HP - Suzuki 4ST from 100 to 175 HP - Tohatsu 4ST form 70 to 115 HP - Selva 2ST from 80 to 150 and 4ST 150 HP - Johnson 4ST from 90 to 140 HP.A A  Practical and easy to install, includes:A A  1 UP28F Pump (Cod MTM 4656601), 4.3 wheel turnsA A  1 UC128-OBF/1 cylinder (Cod MTM 4655014)A A  2 Liters Ultraflex hydraulic oil.A A Thru-bulkheads are used for passing the 2 hydraulic hoses on the transom.A  To be completed with 2 hydraulic hoses kit.A A  Nautech2 steering system kit for outboards:A A  Evinrude 2ST from 75 to 300 HP - Yamaha 2ST from 75 to 300 HP and 4ST from F200 to F250 (..

(6)

168.21€ 166.52€ Ex Tax: 166.52€

Vetus Fitting Kit for Dual Non Return Valve (10mm Fittings)

Vetus Fitting Kit for Dual Non Return Valve (10mm Fittings) The Vetus KITK52175 fitting kit (10mm) for a dual non-return valve is for use with the K30/140B and MTC5210 to MTC17510. Brand Vetus Model KITK52175 Spares and Accessories Non Return Valve Block Fittings ..

(11)

142.56€ 141.13€ Ex Tax: 141.13€

Vetus BYPASS10 By-Pass Valve For 10mm Tubing

Vetus BYPASS10 By-Pass Valve For 10mm Tubing If, in emergency, a quick change-over to tiller steering is required - installation of a by-pass valve is required close to the ram. The Vetus BYPASS10 Valve is supplied with compression fittings and olives for 10mm copper tubing. For systems using Vetus HHOSE6 (6 x 10mm) nylon hose, order the HS145S sleeve inserts. Chromed brass with painted steel removable handle. Brand Vetus Model BYPASS10 ..

(6)

142.56€ 141.13€ Ex Tax: 141.13€

Vetus Seal Kit for Hydraulic Steering Cylinder MTC52 & MTC72

Vetus Seal Kit for Hydraulic Steering Cylinder MTC52 & MTC72 Vetus Part Number: HS863 The Vetus seal kit is suitable for the Vetus MTC52 and Vetus MTC72 hydraulic marine steering cylinders. Brand Vetus Model HS863 Spares and Accessories Seal kit ..

(4)

134.19€ 132.85€ Ex Tax: 132.85€

Hydraulic Hose sae100 r7 ( 9.7 x 16mm) 10mt

Hydraulic Hose sae100 r7 ( 9.7 x 16mm) 10mtResistant, flexible and lightweight SAE100 R7 flex tubing. For steering systems, gangways etc. ..

(12)

130.97€ Ex Tax: 130.97€

kit 2 hoses 5.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)

kit 2 hoses 5.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. Nautech1 steering system kit for outboards:A A  Mercury 2 and 4ST from 100 to 300 HP - Yamaha 4ST from F70 to F150 and from F200 a F300 - Honda 4ST 75/90/115A and from 135 to 250 HP - Suzuki 4ST from 100 to 175 HP - Tohatsu 4ST form 70 to 115 HP - Selva 2ST from 80 to 150 and 4ST 150 HP - Johnson 4ST from 90 to 140 HP.A A  Practical and easy to install, includes:A A  1 UP28F Pump (Cod MTM 4656601), 4.3 wheel turnsA A  1 UC128-OBF/1 cylinder (Cod MTM 4655014)A A  2 Liters Ultraflex hydraulic oil.A A Thru-bulkheads are used for passing the 2 hydraulic hoses on the transom.A  To be completed with 2 hydraulic hoses kit.A A  Nautech2 steering system kit for outboards:A A  Evinrude 2ST from 75 to 300 HP - Yamaha 2ST from 75 to 300 HP and 4ST from F200 to F250 (..

(5)

132.12€ 130.80€ Ex Tax: 130.80€

Vetus Support Sleeve & Olive Set for Steering Hose (HS04N / 10 Pieces)

Vetus Support Sleeve & Olive Set for Steering Hose (HS04N / 10 Pieces) The Vetus HS10131 sleeve insert has a diameter of 6mm, with an 8mm diameter olive, and is for use with HS04N nylon tubing. Set of 10. Brand Vetus Diameter Sleeve: 6mm, Olive: 8mm Model HS10131 ..

(10)

128.70€ 127.41€ Ex Tax: 127.41€

Bracket for Outboards Honda 115/130 hp to install with Navi Mare Hydraulic Steering (Mavi.mare)

Bracket for Outboards Honda 115/130 hp to install with Navi Mare Hydraulic Steering (Mavi.mare)Mounting bracket for cylinder engines Honda 115/130 ..

(8)

125.08€ Ex Tax: 125.08€

2 Hydraulic tubes for Ultraflex Steering 5mt (Ultraflex)

2 Hydraulic tubes for Ultraflex Steering 5mt (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. Nautech1 steering system kit for outboards:A A  Mercury 2 and 4ST from 100 to 300 HP - Yamaha 4ST from F70 to F150 and from F200 a F300 - Honda 4ST 75/90/115A and from 135 to 250 HP - Suzuki 4ST from 100 to 175 HP - Tohatsu 4ST form 70 to 115 HP - Selva 2ST from 80 to 150 and 4ST 150 HP - Johnson 4ST from 90 to 140 HP.A A  Practical and easy to install, includes:A A  1 UP28F Pump (Cod MTM 4656601), 4.3 wheel turnsA A  1 UC128-OBF/1 cylinder (Cod MTM 4655014)A A  2 Liters Ultraflex hydraulic oil.A A Thru-bulkheads are used for passing the 2 hydraulic hoses on the transom.A  To be completed with 2 hydraulic hoses kit.A A  Nautech2 steering system kit for outboards:A A  Evinrude 2ST from 75 to 300 HP - Yamaha 2ST from 75 to 300 HP and 4ST from F200 to F250 (..

(4)

123.11€ 121.87€ Ex Tax: 121.87€

Vetus Seal Kit for Hydraulic Steering Cylinder MTC45

Vetus Seal Kit for Hydraulic Steering Cylinder MTC45 Vetus Part Number: HS821 The Vetus seal kit is suitable for the Vetus MTC45 hydraulic marine steering cylinder. Brand Vetus Model HS821 Spares and Accessories Seal kit ..

(10)

120.99€ 119.78€ Ex Tax: 119.78€

Vetus BYPASS8 By-Pass Valve For 8mm Tubing

Vetus BYPASS8 By-Pass Valve For 8mm Tubing If, in emergency, a quick change-over to tiller steering is required - installation of a by-pass valve is required close to the ram. The Vetus BYPASS8 Valve is supplied with compression fittings and olives for 8mm copper tubing. For systems using Vetus HS04N (6 x 8mm) nylon hose, order the HS1011S sleeve inserts. Chromed brass with painted steel removable handle. Brand Vetus Model BYPASS8 ..

(6)

120.78€ 119.57€ Ex Tax: 119.57€

kit 2 hoses 4.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)

kit 2 hoses 4.5mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. Nautech1 steering system kit for outboards:A A  Mercury 2 and 4ST from 100 to 300 HP - Yamaha 4ST from F70 to F150 and from F200 a F300 - Honda 4ST 75/90/115A and from 135 to 250 HP - Suzuki 4ST from 100 to 175 HP - Tohatsu 4ST form 70 to 115 HP - Selva 2ST from 80 to 150 and 4ST 150 HP - Johnson 4ST from 90 to 140 HP.A A  Practical and easy to install, includes:A A  1 UP28F Pump (Cod MTM 4656601), 4.3 wheel turnsA A  1 UC128-OBF/1 cylinder (Cod MTM 4655014)A A  2 Liters Ultraflex hydraulic oil.A A Thru-bulkheads are used for passing the 2 hydraulic hoses on the transom.A  To be completed with 2 hydraulic hoses kit.A A  Nautech2 steering system kit for outboards:A A  Evinrude 2ST from 75 to 300 HP - Yamaha 2ST from 75 to 300 HP and 4ST from F200 to F250 (..

(6)

114.08€ 112.94€ Ex Tax: 112.94€

Stainless Steel Flange for Vetus Pumps ( 74mm)

Stainless Steel Flange for Vetus Pumps ( 74mm)Spare parts and accessories for Vetus hydraulic steering systems. Non-return valves are used also for dual station. Recess flanges are Stainless Steel and fits old type Vetus pumps. The By-Pass faucet is mounted on hydraulic system to go at the helm. ..

(3)

108.62€ Ex Tax: 108.62€

kit of Brass Fittings to install a Double Hydraulic Steering (Ultraflex)

kit of Brass Fittings to install a Double Hydraulic Steering (Ultraflex)Kit for double station mounting or automatic pilot, complete with all fittings for 3/8” nylon or copper tube. ..

(14)

107.68€ Ex Tax: 107.68€

kit 2 hoses 4mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)

kit 2 hoses 4mt R7 5/16 Hydraulic Steerings Ultraflex (Ultraflex)Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering. Nautech1 steering system kit for outboards:A A  Mercury 2 and 4ST from 100 to 300 HP - Yamaha 4ST from F70 to F150 and from F200 a F300 - Honda 4ST 75/90/115A and from 135 to 250 HP - Suzuki 4ST from 100 to 175 HP - Tohatsu 4ST form 70 to 115 HP - Selva 2ST from 80 to 150 and 4ST 150 HP - Johnson 4ST from 90 to 140 HP.A A  Practical and easy to install, includes:A A  1 UP28F Pump (Cod MTM 4656601), 4.3 wheel turnsA A  1 UC128-OBF/1 cylinder (Cod MTM 4655014)A A  2 Liters Ultraflex hydraulic oil.A A Thru-bulkheads are used for passing the 2 hydraulic hoses on the transom.A  To be completed with 2 hydraulic hoses kit.A A  Nautech2 steering system kit for outboards:A A  Evinrude 2ST from 75 to 300 HP - Yamaha 2ST from 75 to 300 HP and 4ST from F200 to F250 (..

(7)

105.05€ 104.00€ Ex Tax: 104.00€

Vetus Nylon Hydraulic Steering Hose (8mm OD / 15 Metres)

Vetus Nylon Hydraulic Steering Hose (8mm OD / 15 Metres) This marine hydraulic steering hose from Vetus is made from nylon and is primarily designed for use with Vetus cylinders and helm pumps. The steering hose has an outside diameter of 8mm and measures 15 metres in length. The hydraulic steering hose requires a support sleeve for installation. Specifications Brand Vetus Unit of Sale 15 Metre Coil Construction Nylon Diameter 6mm ID, 8mm OD Model HS04N ..

(11)

96.91€ 95.95€ Ex Tax: 95.95€

Rod End for Cylinders Vetus MTC52 & 72

Rod End for Cylinders Vetus MTC52 & 72 This Vetus rod end is suitable for the Vetus MTC52 and Vetus MTC72 hydraulic steering rams. This Rod End has an M12 thread and the diameter of the hole in the ball joint is 12mm. Brand Vetus Model HS879 Spares and Accessories Ram Rod End ..

(8)

94.49€ 93.54€ Ex Tax: 93.54€

Seaflow 90 Degree End Fitting for 8mm Hydraulic Hose (10mm Spigot)

Seaflow 90 Degree End Fitting for 8mm Hydraulic Hose (10mm Spigot) Seaflow hose end fitting with end spigot, designed for use in marine hydraulic steering systems. This is a 90 degree reusable fitting suitable for use with SAE100/R7 hose (Our part number 603508) to adapt to a 10mm spigot. Brand Seaflow Spares and Accessories Steering Hose Fitting ..

(5)

94.46€ 93.51€ Ex Tax: 93.51€

2 Hydraulic Hoses Kit 3,5 mt for Nautech1 steering system

2 Hydraulic Hoses Kit 3,5 mt for Nautech1 steering systemPractical and easy to install Hyco1 steering system kit for all outboards up to 150HP total.Includes:1 UP20F Pump (Cod MTM 4655002);2 Liters Ultraflex hydraulic oil;1 UC94OBF/1 Cylinder (Cod MTM 4655010);To be completed with 2 hydraulic hoses kit.Practical and easy to install Hyco2 steering system kit only for Mercury Optimax 75/90/115/125 HP and Honda BF115D/BF130A outboards.Includes:1 UP20F Pump (Cod MTM 4655002);2 Liters Ultraflex hydraulic oil;1 UC94OBF/3 Cylinder (Cod MTM 4655009);To be completed with 2 hydraulic hoses kit.White and black plastic R8W Bulkhead (Cod MTM 4636401) is used for passing the 2 hydraulic hoses on the transom. ..

(10)

99.39€ 90.65€ Ex Tax: 90.65€

10 m Hydraulic Hose SAE100 R7-5/16

10 m Hydraulic Hose SAE100 R7-5/16Hydraulic steering system for boats up to 9 m. Components and accessories are sold separately: 1 Cylinder;  1 Standard pump or 1 pump with non-return valve;  4 Reusable straight or curved fittings; 5/16 Hydraulic hose ..

(14)

96.76€ 88.24€ Ex Tax: 88.24€

Vetus Oil Seal Set & Gasket for Steering Pumps (HTP, HTPR, HTPT & HTPRT)

Vetus Oil Seal Set & Gasket for Steering Pumps (HTP, HTPR, HTPT & HTPRT) Vetus oil seal set and gasket suitable for use with the following Vetus steering pumps; HTP, HTPR, HTPT and HTPRT. Brand Vetus Contents Oil Seal Set & Gasket Suitability HTP, HTPR, HTPT & HTPRT Steering Pumps ..

(8)

85.69€ 84.84€ Ex Tax: 84.84€

Stainless Steel Flange for Vetus Pumps ( 38mm)

Stainless Steel Flange for Vetus Pumps ( 38mm)Spare parts and accessories for Vetus hydraulic steering systems. Non-return valves are used also for dual station. Recess flanges are Stainless Steel and fits old type Vetus pumps. The By-Pass faucet is mounted on hydraulic system to go at the helm. Stainless steel flangerecessed for adaptation pumpsart. 4344109/10/14 MTP from the old model tothe new model HTP. Can also be used to installthe pump in the retracted position of 38 mm.Comes with 4 stainless steel bolts for assembly...

(7)

91.36€ 83.32€ Ex Tax: 83.32€

Vetus Seal Kit for Hydraulic Cylinder MTC30

Vetus Seal Kit for Hydraulic Cylinder MTC30 This Vetus HS820 seal and gasket kit is suitable to completely overhaul the Vetus MTC30 and Vetus MTC3008 hydraulic steering rams (hydraulic cylinders). Brand Vetus Model HS820 Spares and Accessories Seal kit ..

(12)

79.69€ 78.89€ Ex Tax: 78.89€

Seaflow Straight End Fitting for 8mm Hydraulic Hose (10mm Spigot)

Seaflow Straight End Fitting for 8mm Hydraulic Hose (10mm Spigot) Seaflow hose end fitting with end spigot, designed for use in marine hydraulic steering systems. This is a straight reusable fitting suitable for use with SAE100/R7 hose (Our part number 603508) to adapt to a 10mm spigot. Brand Seaflow Spares and Accessories Steering Hose Fitting ..

(3)

78.22€ 77.44€ Ex Tax: 77.44€

Vetus Rod End for MTC30 Steering Cylinder

Vetus Rod End for MTC30 Steering Cylinder The Vetus HS840 steering rod end is suitable for use with the MTC30 steering rams such as the Vetus MTC3008. Brand Vetus Model HS840 Spares and Accessories Ram Rod End ..

(3)

77.87€ 77.09€ Ex Tax: 77.09€

Bracket Mavi Mare for Outboards Mercury 115/130 hp

Bracket Mavi Mare for Outboards Mercury 115/130 hpMounting bracket for cylinder engines Mercury Optimax 115 ..

(10)

81.79€ 74.59€ Ex Tax: 74.59€

Mounting Base for Vetus MTC30 Hydraulic Cylinder

Mounting Base for Vetus MTC30 Hydraulic Cylinder This Vetus mounting base / trunion is suitable for the Vetus MTC30 hydraulic steering arm. The HS130 mounting base is supplied with 2 screws. Brand Vetus Model HS130 Spares and Accessories Ram Mounting Base ..

(11)

74.84€ 74.10€ Ex Tax: 74.10€

Seaflow Hydraulic Steering Bypass Valve (3/8" BSP Female)

Seaflow Hydraulic Steering Bypass Valve (3/8" BSP Female) This Seaflow hydraulic steering bypass value is suitable for hydraulic steering use with 3/8" BSP female ports. Brand Seaflow Spares and Accessories Bypass Valve ..

(15)

73.68€ 72.95€ Ex Tax: 72.95€

Vetus Support Sleeves for Steering Hose (HHOSE6 / 20 Pieces)

Vetus Support Sleeves for Steering Hose (HHOSE6 / 20 Pieces) The Vetus HS145S sleeve insert has a diameter of 6.5mm and is for use with HHOSE6 nylon hose. Set of 20. Brand Vetus Model HS145S Spares and Accessories Steering Hose Fittings ..

(3)

71.17€ 70.46€ Ex Tax: 70.46€

By-Pass Faucet Vetus For MTC230 & MTC345 Cylinders

By-Pass Faucet Vetus For MTC230 & MTC345 CylindersSpare parts and accessories for Vetus hydraulic steering systems. Non-return valves are used also for dual station. Recess flanges are Stainless Steel and fits old type Vetus pumps. The By-Pass faucet is mounted on hydraulic system to go at the helm. ..

(13)

70.57€ 64.36€ Ex Tax: 64.36€

Vetus 90 Degree Brass Hose Connectors for HHOSE8 (2 Pack)

Vetus 90 Degree Brass Hose Connectors for HHOSE8 (2 Pack) Kit contains two 90 degree fittings to connect Vetus HHOSE8 to Vetus steering components. Brand Vetus Model V-HS1037MS Spares and Accessories Steering Hose Fittings ..

(14)

64.66€ 64.01€ Ex Tax: 64.01€

Chromed Dual thru-hull hose kit for Hydraulic Steering Tube (Ultraflex)

Chromed Dual thru-hull hose kit for Hydraulic Steering Tube (Ultraflex)Connection flange available in three different colours ..

(9)

67.89€ 62.66€ Ex Tax: 62.66€

Tee coupling 3/8 Ultraflex

Tee coupling 3/8 UltraflexBleeding tee coupling 3/8, Nickel-plated brass cylinder. ..

(4)

67.99€ 62.01€ Ex Tax: 62.01€

Drive Force HV10 Hydraulic Oil for Steering Systems (1 Litre Bottle)

Drive Force HV10 Hydraulic Oil for Steering Systems (1 Litre Bottle) Drive Force lubricating oil with a viscosity grade of 10. The oil is designed specifically to protect hydraulic systems from heat and wear problems, to reduce corrosion in moving parts. It also protects against oxidation and has a rust treatment to negate the effects of water contamination. An anti-foam treatment reduces the amount of foaming cause by agitation and the oil also has a good demulsibility rating. The oil is developed with advanced chemistry which gives high filterability and thermal stability. All these features result in a reliable hydraulic steering system for the user. The added protection to the steering components should result in fewer maintenance costs and there should also be a longer service between filter or fluid replacement. The additive treatment in this ISO 10 oil is consistent with the following specifications: ..

(9)

59.47€ 58.88€ Ex Tax: 58.88€