Engine Mounts

Engine Mounts

Engine Mounts

Show:
Sort By:

Vetus LMX500 Flexible Engine Mount (500kg Max Load)

Vetus LMX500 Flexible Engine Mount (500kg Max Load) Vetus LMX500 is a flexible engine mount designed for use with marine engines. This model is designed to accommodate more modern marine engines that are often lighter but more powerful than before. The mount gives ample vertical compression for vibration dampening, but has very high fore and aft stiffness to deal with extreme thrusts. This engine mount is suitable for engines between 95HP and 480HP. Specifications Height 173mm Brand Vetus Engine Mount Vetus Engine Mounts Dimensions Base: 184mm x 96mm M..

(8)

370.26€ 366.56€ Ex Tax: 366.56€

Vetus LMX340 Flexible Engine Mount (340kg Max Load)

Vetus LMX340 Flexible Engine Mount (340kg Max Load) Vetus LMX340 is a flexible engine mount designed for use with marine engines. This model is designed to accommodate more modern marine engines that are often lighter but more powerful than before. The mount gives ample vertical compression for vibration dampening, but has very high fore and aft stiffness to deal with extreme thrusts. This engine mount is suitable for engines between 95HP and 480HP. Specifications Height 173mm Brand Vetus Engine Mount Vetus Engine Mounts Dimensions Base: 184mm x 96mm M..

(4)

370.26€ 366.56€ Ex Tax: 366.56€

Vetus Hydraulic Flexible Engine Mount (67kg Max Load)

Vetus Hydraulic Flexible Engine Mount (67kg Max Load) Vetus MITSTEUN is a flexible engine mount designed for use with marine engines. The flexible mounting contains a rubber-metal damper and a hydraulic shock absorber to give excellent damping properties, absorbing vibrations and propeller thrust. This engine mount is suitable for marine engines with 1, 2 or 3 Cylinderinders, up to approximately 35HP. The hydraulic engine mount is particularly suitable for dealing with horizontal and vertical movements of the engine, and for reducing noise and vibrations in the engine room. Specifications Height 130mm (5-1/8") Brand Vetus Engine Mount Vetus Engine Mounts ..

(8)

366.30€ 362.64€ Ex Tax: 362.64€

R&D Flexible Engine Mount (Shear Type / 500 - 1201LBS / 1" Stud)

R&D Flexible Engine Mount (Shear Type / 500 - 1201LBS / 1" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Specifications Height 161.10mm (6.34"), Base: 86.62mm (3.41") Length Base: 174.63mm (6.88") Width Base: 101.6mm (4") Brand ..

(10)

307.96€ 304.88€ Ex Tax: 304.88€

Orbitrade 22323 Flexible Rubber Mount for Volvo Penta Engines

Orbitrade 22323 Flexible Rubber Mount for Volvo Penta Engines Orbitrade Marine flexible rubber engine mounting designed to replace Volvo part numbers 843323 and 876596. This engine mount is used for suspension support and requires part ORB 22323-1 for installation. It is suitable for the following Volvo Penta marine engine models: AQAD40A, AQAD40B, AQD40A, AD41A, AD41B, AD41D, AD41L-A, AD41P-A, AQAD41A, D41A, D41B, D41D, D41L-A, KAD42A, KAD42B, KAD42P-A. Specifications Brand Orbitrade Marine Engine Mount Engine Mounts For Volvo Engines Replaces Volvo 843323 and 876596 Suitability Volvo Penta: AQAD40A, A..

(8)

292.46€ 289.53€ Ex Tax: 289.53€

R&D Flexible Engine Mount Y75 for Yanmar Engines (40-130LBS)

R&D Flexible Engine Mount Y75 for Yanmar Engines (40-130LBS) The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount Y75. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 155mm (6.1'), Base: 87mm (3.43") Length 206mm (8.11") Width 60mm (2.36") Brand R&D Marine ..

(15)

268.17€ 265.49€ Ex Tax: 265.49€

R&D Flexible Engine Mount Y200 for Yanmar Engines (70-320LBS)

R&D Flexible Engine Mount Y200 for Yanmar Engines (70-320LBS) The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount Y200. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 155mm (6.1"), Base: 87mm (3.43") Length 206mm (8.11") Width 60mm (2.36") Brand R&D Marine ..

(12)

268.17€ 265.49€ Ex Tax: 265.49€

R&D Flexible Engine Mount Y150 for Yanmar Engines (60-240LBS)

R&D Flexible Engine Mount Y150 for Yanmar Engines (60-240LBS) The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount Y150. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 155mm (6.1"), Base: 87mm (3.43") Length 206mm (8.11") Width 60mm (2.36") Brand R&D Marine ..

(8)

268.17€ 265.49€ Ex Tax: 265.49€

R&D Flexible Engine Mount Y100 for Yanmar Engines (50-160LBS)

R&D Flexible Engine Mount Y100 for Yanmar Engines (50-160LBS) The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount Y100. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 155mm (6.1"), Base: 87mm (3.43") Length 206mm (8.11") Width 60mm (2.36") Brand R&D Marine ..

(4)

268.17€ 265.49€ Ex Tax: 265.49€

R&D Flexible Engine Mount 1GM10 for Yanmar Engines (40-131LBS)

R&D Flexible Engine Mount 1GM10 for Yanmar Engines (40-131LBS) The R&D flexible engine mount is designed to be a direct replacement for the Yanmar engine mount 1GM. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height Maximum: 155mm (6.1") Brand R&D Marine Country of Origin United Kingdom Engine Mount Engine Mounts For Yanm..

(12)

268.17€ 265.49€ Ex Tax: 265.49€

R&D Double Acting Shear Loaded Engine Mount (160-671LBS / 3/4" Stud)

R&D Double Acting Shear Loaded Engine Mount (160-671LBS / 3/4" Stud) The double acting shear engine mount is a unique mounting incorporating two rubber elements which are pre-loaded against each other, giving excellent isolation together with good control on problem installations. This flexible engine mount is suitable for a maximum load of 73kg to 305kg (160lbs to 671lbs). The dimensions of the double acting shear loaded flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 153mm (6.0"), Base: 75mm (2.96") Length Base: 181mm (7.12") Width Base: 80mm (3.1..

(7)

243.25€ 240.82€ Ex Tax: 240.82€

R&D Flexible Engine Mount (Shear Type / 880 - 2000LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 880 - 2000LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 183.51mm (7.22"), Base: 86.62mm (3.41") Length B..

(10)

228.41€ 226.13€ Ex Tax: 226.13€

R&D Flexible Engine Mount (Shear Type / 650 - 1500LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 650 - 1500LBS / 3/4" Stud) R&D 207016 flexible engine mountings have been designed and engineered for the rigours of marine engines. The design of the 207016 flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 183.51mm (7.22"), Base: 86.62mm (3.41") Length ..

(7)

228.41€ 226.13€ Ex Tax: 226.13€

R&D Flexible Engine Mount (Shear Type / 500 - 1200LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 500 - 1200LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 183.51mm (7.22"), Base: 86.62mm (3.41") Length B..

(9)

228.41€ 226.13€ Ex Tax: 226.13€

R&D Double Acting Shear Loaded Engine Mount (160-670LBS / 5/8" Stud)

R&D Double Acting Shear Loaded Engine Mount (160-670LBS / 5/8" Stud) The double acting shear engine mount is a unique mounting incorporating two rubber elements which are pre-loaded against each other, giving excellent isolation together with good control on problem installations. This flexible engine mount is suitable for a maximum load of 73kg to 305kg (160lbs to 670lbs). The dimensions of the double acting shear loaded flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 153mm (6.0"), Base: 75mm (2.96") Length Base: 181mm (7.12") Width Base: 80mm (3.1..

(15)

228.41€ 226.13€ Ex Tax: 226.13€

R&D Double Acting Shear Loaded Engine Mount (100-420LBS / 5/8" Stud)

R&D Double Acting Shear Loaded Engine Mount (100-420LBS / 5/8" Stud) The 800-032 double acting shear engine mount is a unique engine mounting incorporating two rubber elements which are pre-loaded against each other, giving excellent isolation together with good control on problem installations. The R&D 800-032 marine flexible engine mount is suitable for a maximum load of 46kg to 190kg (100lbs to 420lbs). The dimensions of the double acting shear loaded flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 153mm (6.0"), Base: 75mm (2.96") Length Base: 181mm (7.12") Width ..

(6)

228.41€ 226.13€ Ex Tax: 226.13€

Engine Shock Absorber-Marine Engine Mounts L M20 800KG

Engine Shock Absorber-Marine Engine Mounts L M20 800KGFlexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore) ..

(11)

194.67€ Ex Tax: 194.67€

Engine Shock Absorber-Marine Engine Mounts L M20 600KG

Engine Shock Absorber-Marine Engine Mounts L M20 600KGFlexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore) ..

(7)

182.46€ Ex Tax: 182.46€

R&D Flexible Engine Mount (Shear Type / 340 - 761LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 340 - 761LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 152mm (6"), Base: 60.33mm (2.38") Length Base: 12..

(5)

179.36€ 177.57€ Ex Tax: 177.57€

Vetus HY230 Flexible Engine Mount (230kg Max Load)

Vetus HY230 Flexible Engine Mount (230kg Max Load) Vetus HY230 is a flexible engine mount designed for use with marine engines. This model combines low vertical stiffness with high longitudinal stiffness to make is perfect for a marine diesel engine. This engine mount is suitable for engines between 40HP and 170HP. Specifications Height 130mm (5-1/8") Brand Vetus Engine Mount Vetus Engine Mounts Dimensions Base: 175mm x 75mm Stud Size M16 x 1.5 ..

(15)

172.26€ 170.54€ Ex Tax: 170.54€

R&D Flexible Engine Mount (Shear Type / 340 - 760LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 340 - 760LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 60.33mm (2.38") Length Base:..

(14)

166.11€ 164.45€ Ex Tax: 164.45€

Galvanized Steel Engines Support 230mm M16 500kg (Ancor)

Galvanized Steel Engines Support 230mm M16 500kg (Ancor)Galvanized steel elastic support with pin ..

(5)

151.74€ Ex Tax: 151.74€

Engine Shock Absorber-Marine Engine Mounts L M20 400KG

Engine Shock Absorber-Marine Engine Mounts L M20 400KGFlexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore) ..

(4)

148.82€ Ex Tax: 148.82€

Engine Shock Absorber - Marine Engine Mounts 115 mm, 600kg

Engine Shock Absorber - Marine Engine Mounts 115 mm, 600kgStainless Steel elastic support without pin ..

(14)

147.43€ Ex Tax: 147.43€

R&D Flexible Engine Mount for Cummins Engines (80-235LBS)

R&D Flexible Engine Mount for Cummins Engines (80-235LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(10)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount for Cummins Engines (300-685LBS)

R&D Flexible Engine Mount for Cummins Engines (300-685LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(13)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount for Cummins Engines (250-565LBS)

R&D Flexible Engine Mount for Cummins Engines (250-565LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(9)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount for Cummins Engines (120-415LBS)

R&D Flexible Engine Mount for Cummins Engines (120-415LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(15)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount (Shear Type / 80 - 233LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 233LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 139..

(8)

140.82€ 139.41€ Ex Tax: 139.41€

R&D Flexible Engine Mount (Shear Type / 300 - 683LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 300 - 683LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 13..

(4)

140.82€ 139.41€ Ex Tax: 139.41€

R&D Flexible Engine Mount (Shear Type / 250 - 563LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 563LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 13..

(9)

140.82€ 139.41€ Ex Tax: 139.41€

R&D Flexible Engine Mount (Shear Type / 120 - 413LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 413LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 13..

(15)

140.82€ 139.41€ Ex Tax: 139.41€

R&D Flexible Engine Mount (Shear Type / 80 - 232LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 232LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 13..

(9)

135.22€ 133.87€ Ex Tax: 133.87€

R&D Flexible Engine Mount (Shear Type / 300 - 682LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 300 - 682LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(12)

135.22€ 133.87€ Ex Tax: 133.87€

R&D Flexible Engine Mount (Shear Type / 250 - 562LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 562LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(7)

135.22€ 133.87€ Ex Tax: 133.87€

R&D Flexible Engine Mount (Shear Type / 120 - 412LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 412LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 13..

(13)

135.22€ 133.87€ Ex Tax: 133.87€

R&D Flexible Engine Mount (Shear Type / 80 - 231LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 231LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 127..

(11)

128.86€ 127.57€ Ex Tax: 127.57€

R&D Flexible Engine Mount (Shear Type / 300 - 681LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 300 - 681LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 12..

(6)

128.86€ 127.57€ Ex Tax: 127.57€

R&D Flexible Engine Mount (Shear Type / 250 - 561LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 561LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 12..

(12)

128.86€ 127.57€ Ex Tax: 127.57€

R&D Flexible Engine Mount (Shear Type / 120 - 411LBS / 3/4" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 411LBS / 3/4" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 165mm (6.5"), Base: 63.5mm (2.5") Length Base: 12..

(11)

128.86€ 127.57€ Ex Tax: 127.57€

Engine Shock Absorber-Marine Engine Mounts Vetus HY230 60SH

Engine Shock Absorber-Marine Engine Mounts Vetus HY230 60SHVetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore) ..

(5)

123.55€ Ex Tax: 123.55€

Engine Shock Absorber-Marine Engine Mounts Vetus HY150 50SH

Engine Shock Absorber-Marine Engine Mounts Vetus HY150 50SHVetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore) ..

(14)

123.55€ Ex Tax: 123.55€

Engine Shock Absorber-Marine Engine Mounts Vetus HY100 40SH

Engine Shock Absorber-Marine Engine Mounts Vetus HY100 40SHVetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore) ..

(9)

123.55€ Ex Tax: 123.55€

R&D Flexible Engine Mount (Shear Type / 80 - 230LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 80 - 230LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 12..

(7)

123.29€ 122.06€ Ex Tax: 122.06€

R&D Flexible Engine Mount (Shear Type / 50 - 175LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 50 - 175LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 12..

(3)

123.29€ 122.06€ Ex Tax: 122.06€

R&D Flexible Engine Mount (Shear Type / 300 - 680LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 300 - 680LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(6)

123.29€ 122.06€ Ex Tax: 122.06€

R&D Flexible Engine Mount (Shear Type / 250 - 560LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 250 - 560LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: 1..

(14)

123.29€ 122.06€ Ex Tax: 122.06€

R&D Flexible Engine Mount (Shear Type / 120 - 410LBS / 5/8" Stud)

R&D Flexible Engine Mount (Shear Type / 120 - 410LBS / 5/8" Stud) R&D flexible engine mountings have been designed and engineered for the rigours of marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 137mm (5.38"), Base: 63.5mm (2.5") Length Base: ..

(6)

123.29€ 122.06€ Ex Tax: 122.06€

Engine Shock Absorber-Marine Engine Mounts Y M16 80KG

Engine Shock Absorber-Marine Engine Mounts Y M16 80KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore) ..

(7)

104.89€ Ex Tax: 104.89€

Engine Shock Absorber-Marine Engine Mounts Y M16 180KG

Engine Shock Absorber-Marine Engine Mounts Y M16 180KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore) ..

(4)

104.89€ Ex Tax: 104.89€

Engine Shock Absorber-Marine Engine Mounts Y M16 50KG

Engine Shock Absorber-Marine Engine Mounts Y M16 50KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore) ..

(3)

104.89€ Ex Tax: 104.89€

Engine Shock Absorber-Marine Engine Mounts Y M16 120KG

Engine Shock Absorber-Marine Engine Mounts Y M16 120KGYanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore) ..

(15)

104.89€ Ex Tax: 104.89€

R&D Compression Flexible Engine Mount (320-500LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (320-500LBS / 5/8" Stud) The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375"). If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm. The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 116mm (4.57"), Base: 44.5mm (1.75") ..

(7)

103.12€ 102.09€ Ex Tax: 102.09€

R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (160-370LBS / 5/8" Stud) The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375"). If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm. The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 116mm (4.57"), Base: 44.5mm (1.75") ..

(10)

103.12€ 102.09€ Ex Tax: 102.09€

R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud)

R&D Compression Flexible Engine Mount (100-180LBS / 5/8" Stud) The compression flexible engine mounting is a low height mount with minimum deflection. Typical uses: 2 and 3 Cylinder Long Stroke, 4 Cylinder, 6 Cylinder and more. Compression mountings are lower in height and give reduced isolation compared to Shear and Super mountings. Clearance between the underside of the height adjusting nut and the top washer of the mounting should not be more than 9mm (0.375"). If required, increase the height with a spacer under the mount. The first adjusting nut adds approximately 10mm. The dimensions of the flexible engine mount are shown in the drawing located below the main image, click the image to and hold your mouse over the image view the full size drawing. Specifications Height 116mm (4.57"), Base: 44.5mm (1.75") ..

(10)

103.12€ 102.09€ Ex Tax: 102.09€

Engine Shock Absorber Ancor - Marine Engine Mounts 180mm , 600kg

Engine Shock Absorber Ancor - Marine Engine Mounts 180mm , 600kgAntivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%. ..

(11)

109.83€ 100.17€ Ex Tax: 100.17€

Engine Shock Absorber - Marine Engine Mounts 92 mm, 350kg

Engine Shock Absorber - Marine Engine Mounts 92 mm, 350kgStainless Steel elastic support without pin ..

(6)

107.75€ 98.27€ Ex Tax: 98.27€

XD Engine Mounts 120 x 70mm 100kg

XD Engine Mounts 120 x 70mm 100kgAnti-vibration mounts for low power Diesel engines and for mobile applications that require a high degree of insulation. Specific design with low vertical and radial stiffness, ideal for engines with large vibrations at low idle speeds. 80 mm length M16 threaded stud.A (SH = Shore) ..

(13)

106.68€ 97.29€ Ex Tax: 97.29€

XD Engine Mounts 120 x 70mm 75kg

XD Engine Mounts 120 x 70mm 75kgAnti-vibration mounts for low power Diesel engines and for mobile applications that require a high degree of insulation. Specific design with low vertical and radial stiffness, ideal for engines with large vibrations at low idle speeds. 80 mm length M16 threaded stud.A (SH = Shore) ..

(5)

104.32€ 95.14€ Ex Tax: 95.14€

Engine Shock Absorber-Marine Engine Mounts VD M12 120KG

Engine Shock Absorber-Marine Engine Mounts VD M12 120KGV structure flexible mount for big stress with little load. For small engines working most of the time at low run. ..

(9)

93.28€ Ex Tax: 93.28€