Engine Vent Systems

Engine Vent Systems

Engine Vent Systems

Show:
Sort By:

Ventilation System Racor 8000 Closed (Right Hand / 1133 LPM)

Ventilation System Racor 8000 Closed (Right Hand / 1133 LPM) Racor CCV8000 RH crankcase breather filter unit with right hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CCV8000 crankcase vent system is a closed breather filter for turbocharged engines, where the emissions are returned to the turbo after filtration. It has a bypass assembly valve, which will release a red indicator on the lid to show the element is blocked and in need of changing. The Racor CCV closed crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 40 for Closed Crankcase systems. This will give the..

(7)

1,600.00€ 1,584.00€ Ex Tax: 1,584.00€

Ventilation System Racor 8000 Closed (Left Hand / 1133 LPM)

Ventilation System Racor 8000 Closed (Left Hand / 1133 LPM) Racor CCV8000 LH crankcase breather filter unit with left hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CCV8000 crankcase vent system is a closed breather filter for turbocharged engines, where the emissions are returned to the turbo after filtration. It has a bypass assembly valve, which will release a red indicator on the lid to show the element is blocked and in need of changing. The Racor CCV closed crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 40 for Closed Crankcase systems. This will give the r..

(11)

1,600.00€ 1,584.00€ Ex Tax: 1,584.00€

Ventilation System Racor 6000 Closed (Right Hand / 566 LPM)

Ventilation System Racor 6000 Closed (Right Hand / 566 LPM) Racor CCV6000 RH crankcase breather filter unit with right hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CCV6000 crankcase vent system is a closed breather filter for turbocharged engines, where the emissions are returned to the turbo after filtration. It has a bypass assembly valve, which will release a red indicator on the lid to show the element is blocked and in need of changing. The Racor CCV closed crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 40 for Closed Crankcase systems. This will give the ..

(6)

1,250.00€ 1,237.50€ Ex Tax: 1,237.50€

Ventilation System Racor 6000 Closed (Left Hand / 566 LPM)

Ventilation System Racor 6000 Closed (Left Hand / 566 LPM) Racor CCV6000 LH crankcase breather filter unit with left hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CCV6000 crankcase vent system is a closed breather filter for turbocharged engines, where the emissions are returned to the turbo after filtration. It has a bypass assembly valve, which will release a red indicator on the lid to show the element is blocked and in need of changing. The Racor CCV closed crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 40 for Closed Crankcase systems. This will give the ro..

(10)

1,250.00€ 1,237.50€ Ex Tax: 1,237.50€

Ventilation System Racor 4500 Closed (Right Hand / 283 LPM)

Ventilation System Racor 4500 Closed (Right Hand / 283 LPM) Racor CCV4500 RH crankcase breather filter unit with right hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CCV4500 crankcase vent system is a closed breather filter for turbocharged engines, where the emissions are returned to the turbo after filtration. It has a bypass assembly valve, which will release a red indicator on the lid to show the element is blocked and in need of changing. The Racor CCV closed crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 40 for Closed Crankcase systems. This will give the ..

(8)

980.83€ 971.02€ Ex Tax: 971.02€

Ventilation System Racor 4500 Closed (Left Hand / 283 LPM)

Ventilation System Racor 4500 Closed (Left Hand / 283 LPM) Racor CCV4500 LH crankcase breather filter unit with left hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CCV4500 crankcase vent system is a closed breather filter for turbocharged engines, where the emissions are returned to the turbo after filtration. It has a bypass assembly valve, which will release a red indicator on the lid to show the element is blocked and in need of changing. The Racor CCV closed crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 40 for Closed Crankcase systems. This will give the ro..

(6)

980.83€ 971.02€ Ex Tax: 971.02€

Ventilation System Racor 4500 Open (Right Hand / 283 LPM)

Ventilation System Racor 4500 Open (Right Hand / 283 LPM) Racor CV4501-04R crank case breather filter unit with right hand flow. This CV4501 crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl together with an 04 grade crankcase breather filter element. The Racor CV4501 crankcase vent system is an open breather filter for naturally aspirated engines, where emissions are returned to atmosphere after filtration. The CV4501 engine crankcase breather system does not have a bypass valve, so should be regularly serviced to prevent damaging pressure building up within the crankcase. The Racor CV4501 open crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. T..

(15)

889.49€ 880.59€ Ex Tax: 880.59€

Ventilation System Racor 4500 Open (Left Hand / 283 LPM)

Ventilation System Racor 4500 Open (Left Hand / 283 LPM) Racor CV4501-04L crank case breather filter unit with left hand flow. This crankcase unit has a die cast head and a glass-filled nylon and black powder epoxy-coated steel bowl. The Racor CV4501 crankcase vent system is an open breather filter for naturally aspirated engines, where emissions are returned to atmosphere after filtration. It does not have a bypass valve, so should be regularly serviced to prevent damaging pressure building up within the crankcase. The Racor CV open crank vent breather filter system will prevent oil pollution by collecting the engine blow back and separate out the oil mist. The collected oil is then returned to the engine sump. Racor offers a rough guide for selecting the right crankcase vent system for your engine. This is to take the rated horsepower and divide by 20 for Open Crankcase systems. This will give the rough cubic ..

(12)

889.49€ 880.59€ Ex Tax: 880.59€

in-line Helicoidal Blowers 24v 3000M3 Hour

in-line Helicoidal Blowers 24v 3000M3 HourBi-directional flow in-line helicoidal blowers with permanent magnet electric motor for continuous use. Varnished Steel drum with dynamically and statically balanced Polypropylene fan. ..

(7)

850.75€ 842.24€ Ex Tax: 842.24€

Ventilation Hose Seaflow (152mm ID / 10M)

Ventilation Hose Seaflow (152mm ID / 10M) The Seaflow insulated ducting hose with a 152mm ID is suitable for air conditioning, mechanical ventilation including simple or double flow, it can help with the reduction of condensation and heat dispersion. Perfect for industrial and marine use. This ducting hose is constructed from addivated polyolefin resins film, thermos, insulating coating in netted and closed cell foam polyethylene, external protection in addivated polyolefin resins film and embedded steel wire helix. Specifications Temperature Range Min: -40°C Max: 110 °C Brand Seaflow Unit of Sale 10 Metres Bending Radius ..

(7)

674.98€ 668.23€ Ex Tax: 668.23€

Ventilation Hose Seaflow (127mm ID / 10M)

Ventilation Hose Seaflow (127mm ID / 10M) The Seaflow insulated ducting hose with a 127mm ID is suitable for air conditioning, mechanical ventilation including simple or double flow, it can help with the reduction of condensation and heat dispersion. Perfect for industrial and marine use. This ducting hose is constructed from addivated polyolefin resins film, thermos, insulating coating in netted and closed cell foam polyethylene, external protection in addivated polyolefin resins film and embedded steel wire helix. Specifications Temperature Range Min: -40°C Max: 110 °C Brand Seaflow Unit of Sale 10 Metres Bending Radius ..

(6)

626.93€ 620.66€ Ex Tax: 620.66€

Helicoidal blowers 24v 1800m3

Helicoidal blowers 24v 1800m3Bi-directional flow in-line helicoidal blowers with permanent magnet electric motor for continuous use. Varnished Steel drum with dynamically and statically balanced Polypropylene fan. ..

(6)

611.33€ 605.21€ Ex Tax: 605.21€

Ventilation Hose Seaflow (102mm ID / 10M)

Ventilation Hose Seaflow (102mm ID / 10M) The Seaflow insulated ducting hose with a 102mm ID is suitable for air conditioning, mechanical ventilation including simple or double flow, it can help with the reduction of condensation and heat dispersion. Perfect for industrial and marine use. This ducting hose is constructed from addivated polyolefin resins film, thermos, insulating coating in netted and closed cell foam polyethylene, external protection in addivated polyolefin resins film and embedded steel wire helix. Specifications Temperature Range Min: -40°C Max: 110 °C Brand Seaflow Unit of Sale 10 Metres Bending Radius ..

(13)

594.53€ 588.58€ Ex Tax: 588.58€

Aluminum Gebo ventilator 600 x 175 mm

Aluminum Gebo ventilator 600 x 175 mmGebo ventilator built in white varnished light alloy (RAL9010), flush mounted, complete with rear conveyor that does not allow water coming in fromoutside. The particular drawing makes an air dynamic air flow when boat is going, so it is suitable for the engine room. Thanks to the Clamps system,no drilling needed and no screws at sight. Dims. 600x175 mm. ..

(7)

557.78€ 552.21€ Ex Tax: 552.21€

Ventilation Hose Seaflow (76mm ID / 10M)

Ventilation Hose Seaflow (76mm ID / 10M) The Seaflow insulated ducting hose with a 76mm ID is suitable for air conditioning, mechanical ventilation including simple or double flow, it can help with the reduction of condensation and heat dispersion. Perfect for industrial and marine use. This ducting hose is constructed from addivated polyolefin resins film, thermos, insulating coating in netted and closed cell foam polyethylene, external protection in addivated polyolefin resins film and embedded steel wire helix. Specifications Temperature Range Min: -40°C Max: 110 °C Brand Seaflow Unit of Sale 10 Metres Bending Radius ..

(7)

536.64€ 531.27€ Ex Tax: 531.27€

Bilge Blower Jabsco 35770-0094 ( 24V / 102mm)

Bilge Blower Jabsco 35770-0094 ( 24V / 102mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35770-0094 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where a bracket is used to mount the blower to any solid surface. This is a heavy duty blower which is suitable for continuous duty, with a 5,000 h..

(4)

499.00€ 494.01€ Ex Tax: 494.01€

Bilge Blower jabsco 35770-0092 (12V / 102mm)

Bilge Blower jabsco 35770-0092 (12V / 102mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35770-0092 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where a bracket is used to mount the blower to any solid surface. This is a heavy duty blower which is suitable for continuous duty, with a 5,000 ho..

(8)

499.00€ 494.01€ Ex Tax: 494.01€

Bilge Blower Jabsco 35760-0094 ( 24V / 102mm)

Bilge Blower Jabsco 35760-0094 ( 24V / 102mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35760-0094 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flange mounting which installs directly onto the bulkhead. This is a heavy duty blower which is suitable for continuous duty, with a 5,000 hour motor life. ..

(7)

499.00€ 494.01€ Ex Tax: 494.01€

Bilge Blower Jabsco 35760-0092 ( 12V / 102mm)

Bilge Blower Jabsco 35760-0092 ( 12V / 102mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35760-0092 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flange mounting which installs directly onto the bulkhead. This is a heavy duty blower which is suitable for continuous duty, with a 5,000 hour motor life. ..

(7)

499.00€ 494.01€ Ex Tax: 494.01€

Spare Filter Racor CCV 55222-10

Spare Filter Racor CCV 55222-10 Genuine Racor CCV 55222-10 ultra grade service filter element for Racor 8000 series open and closed crankcase vent filter unit. The 10 grade is an ultra high density longer lasting filter element which is suitable for petrol and diesel applications. Specifications Series CCV 8000 Series Brand Racor Open Closed Crankcase Systems Open|Closed Country of Origin United States Crankcase Ventilation Filter Element Filter Density ..

(15)

473.70€ 468.96€ Ex Tax: 468.96€

Bilge Blower Jabsco 35440-0010 / 24V / 102mm )

Bilge Blower Jabsco 35440-0010 / 24V / 102mm ) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35440-0010 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where a bracket is used to mount the blower to any solid surface. ..

(9)

429.34€ 425.05€ Ex Tax: 425.05€

Stainless Steel Reccesed Air Vent Vetus 890 x 198mm

Stainless Steel Reccesed Air Vent Vetus 890 x 198mm316 Stainless Steel Vetus SSV recessed air vent with Anodized Aluminum grids. ..

(5)

422.50€ 418.27€ Ex Tax: 418.27€

Jabsco Snail Cam Blower (Flangemount / 24V / 102mm Ducting Hose)

Jabsco Snail Cam Blower (Flangemount / 24V / 102mm Ducting Hose) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35400-0010 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flange mounting which installs directly onto the bulkhead. ..

(11)

399.00€ 395.01€ Ex Tax: 395.01€

Bilge Blower Jabsco 35440-0000 (12V / 102mm)

Bilge Blower Jabsco 35440-0000 (12V / 102mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35440-0000 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where a bracket is used to mount the blower to any solid surface. ..

(7)

399.00€ 395.01€ Ex Tax: 395.01€

Bilge Blower Jabsco 35400-0000 ( 12V / 102mm)

Bilge Blower Jabsco 35400-0000 ( 12V / 102mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35400-0000 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flange mounting which installs directly onto the bulkhead. ..

(12)

399.00€ 395.01€ Ex Tax: 395.01€

Vetus Aluminium Suction Vent (90HP Engines)

Vetus Aluminium Suction Vent (90HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 90hp, requiring 1 on starboard side and 1 port side. Specifications Height 172mm (6.8") Width 670mm (26-3/8") Brand Vetus With Flyscreen No ..

(3)

394.02€ 390.08€ Ex Tax: 390.08€

Racor Open Crankcase Ventilation System Element Kit For CV820

Racor Open Crankcase Ventilation System Element Kit For CV820 This replacement Racor RAC-CV820SK open crankcase filter element is suitable for the Racor CV820 crankcase emissions ventilation system. Specifications Brand Racor Open Closed Crankcase Systems Open Crankcase Ventilation Filter Element Suitability Racor CV820 Crankvent crankcase emissions system. ..

(6)

390.93€ 387.02€ Ex Tax: 387.02€

Vetus Aluminium Suction Vent (70HP Engines)

Vetus Aluminium Suction Vent (70HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 70hp, requiring 1 on starboard side and 1 port side. Specifications Height 159mm (6-1/4") Width 590mm (23.2") Brand Vetus With Flyscreen No ..

(5)

372.24€ 368.52€ Ex Tax: 368.52€

Vetus Aluminium Suction Vent (60HP Engines)

Vetus Aluminium Suction Vent (60HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 60hp, requiring 1 on starboard side and 1 port side. Specifications Height 146mm (5-3/4") Width 570mm (22.4") Brand Vetus With Flyscreen No ..

(4)

362.34€ 358.72€ Ex Tax: 358.72€

Stainless Steel Air Vent Vetus 750 x 198mm

Stainless Steel Air Vent Vetus 750 x 198mm316 Stainless Steel Vetus SSV recessed air vent with Anodized Aluminum grids. ..

(8)

358.77€ 355.19€ Ex Tax: 355.19€

Inline Bilge Blower Vetus VENT17824 (24V / 178mm)

Inline Bilge Blower Vetus VENT17824 (24V / 178mm) Vetus in-line ventilation extraction fan in a cast aluminium housing. This high capacity fan is suitable for ventilating bilges, engine compartments and other similar areas. The extractor is suitable for bulkhead mounting and accepts 178mm air ducting hose. Vetus VENT17824 complies with ISO 9097 marine standard and is ignition protected. Warning! Extraction ventilators should never be operated when the engines are running. The suction power of the engine may over-rotate the ventilator and cause the electric motor to burn out. Amps 4A Flow Rate ..

(9)

356.40€ 352.84€ Ex Tax: 352.84€

Inline Bilge Blower Vetus VENT17812 (12V / 178mm)

Inline Bilge Blower Vetus VENT17812 (12V / 178mm) Vetus in-line ventilation extraction fan in a cast aluminium housing. This high capacity fan is suitable for ventilating bilges, engine compartments and other similar areas. The extractor is suitable for bulkhead mounting and accepts 178mm air ducting hose. Vetus VENT17812 complies with ISO 9097 marine standard and is ignition protected. Warning! Extraction ventilators should never be operated when the engines are running. The suction power of the engine may over-rotate the ventilator and cause the electric motor to burn out. Amps 8A Flow Rate ..

(3)

356.40€ 352.84€ Ex Tax: 352.84€

Vetus Aluminium Suction Vent (50HP Engines)

Vetus Aluminium Suction Vent (50HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 50hp, requiring 1 on starboard side and 1 port side. Specifications Height 146mm (5-3/4") Width 490mm (19.3") Brand Vetus With Flyscreen No ..

(15)

348.48€ 345.00€ Ex Tax: 345.00€

Bilge Blower Jabsco 36740-0010 24V / 76mm

Bilge Blower Jabsco 36740-0010 24V / 76mm The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 36740-0010 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where the mounting bracket supplied is used to mount the blower to any solid surface. ..

(15)

320.14€ 316.94€ Ex Tax: 316.94€

Bilge Blower Jabsco 36740-0000 12V / 76mm

Bilge Blower Jabsco 36740-0000 12V / 76mm The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 36740-0000 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where a bracket is used to mount the blower to any solid surface. ..

(15)

320.14€ 316.94€ Ex Tax: 316.94€

Bilge Blower Jabsco 34739-0020 (24V / 76mm)

Bilge Blower Jabsco 34739-0020 (24V / 76mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 34739-0020 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flange mounting which installs directly onto the bulkhead. ..

(6)

320.14€ 316.94€ Ex Tax: 316.94€

Bilge Blower Jabsco 34739-0010 (12V / 76mm)

Bilge Blower Jabsco 34739-0010 (12V / 76mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 34739-0010 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flange mounting which installs directly onto the bulkhead. ..

(8)

320.14€ 316.94€ Ex Tax: 316.94€

Vetus Aluminium Suction Vent (40HP Engines)

Vetus Aluminium Suction Vent (40HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 40hp, requiring 1 on starboard side and 1 port side. Specifications Height 130mm (5-1/8") Width 450mm (17.7") Brand Vetus With Flyscreen No ..

(8)

289.08€ 286.19€ Ex Tax: 286.19€

Racor Element For 6000 Series Crankcase Systems (10 Grade)

Racor Element For 6000 Series Crankcase Systems (10 Grade) Genuine Racor CCV55274-10 ultra grade service filter element for Racor 6000 series open and closed crankcase vent filter unit. The 10 grade is an ultra high density longer lasting filter element which is suitable for petrol and diesel applications. Specifications Series CCV 6000 Series Brand Racor Open Closed Crankcase Systems Open|Closed Country of Origin United States Crankcase Ventilation Filter Element Filter Density ..

(15)

278.23€ 275.45€ Ex Tax: 275.45€

Racor Element For 8000 Series Crankcase Systems (08 Grade)

Racor Element For 8000 Series Crankcase Systems (08 Grade) Genuine Racor CCV55222-08 high grade service filter element for Racor 8000 series open and closed crankcase vent filter unit. The 08 grade is a high density filter element which is suitable for petrol and diesel applications. Specifications Series CCV 8000 Series Brand Racor Open Closed Crankcase Systems Open|Closed Crankcase Ventilation Filter Element Filter Density High Filter Grade 8 ..

(4)

266.16€ 263.50€ Ex Tax: 263.50€

Vetus Aluminium Suction Vent (30HP Engines)

Vetus Aluminium Suction Vent (30HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 30hp, requiring 1 on starboard side and 1 port side. Specifications Height 130mm (5-1/8") Width 360mm (14.2") Brand Vetus With Flyscreen No ..

(14)

261.36€ 258.75€ Ex Tax: 258.75€

Centrifugal blowers Ocean 24v ( 1000 m3 / Hour)

Centrifugal blowers Ocean 24v ( 1000 m3 / Hour)High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules. ..

(6)

240.03€ Ex Tax: 240.03€

Vetus Aluminium Suction Vent (25HP Engines)

Vetus Aluminium Suction Vent (25HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 25hp, requiring 1 on starboard side and 1 port side. Specifications Height 117mm (4-5/8") Width 350mm (13.8") Brand Vetus With Flyscreen No ..

(8)

237.60€ 235.22€ Ex Tax: 235.22€

Stainless Steel Air Vent Vetus 660 x 159mm

Stainless Steel Air Vent Vetus 660 x 159mm316 Stainless Steel Vetus SSV recessed air vent with Anodized Aluminum grids. ..

(9)

236.97€ 234.60€ Ex Tax: 234.60€

Vetus Aluminium Suction Vent (20HP Engines)

Vetus Aluminium Suction Vent (20HP Engines) Vetus aluminium suction air vents, designed for engine rooms and other such applications. This air vent, with polished anodised aluminium frame and grills, uses suction to extract and vent hot air from the engine room. A marine diesel engine also needs fresh combustion air to enter the engine room (around 4.5m³ per hp per hour), and this air vent allows this. This Vetus air vent is suitable for engines up to 20hp, requiring 1 on starboard side and 1 port side. Specifications Height 117mm (4-5/8") Width 300mm (11.8") Brand Vetus With Flyscreen No ..

(3)

223.74€ 221.50€ Ex Tax: 221.50€

Bilge Blower Jabsco 35515-0010 (Flexmount / 12V / 76mm)

Bilge Blower Jabsco 35515-0010 (Flexmount / 12V / 76mm) The Jabsco snail cam ventilation blower is suitable for ventilating areas such as the engine room, fuel compartments, galley and head. This blower is made from corrosion resistant materials, including a nickel plated motor, to extend life and maintain performance. The motor shaft is also sealed for moisture protection. All this makes the Jabsco 35515-0010 a very efficient air intake or extraction blower which can handle high volumes of air flow. Despite handling such large volumes of air, this blower is quiet and has a low current draw. Owing to the radial design, Jabsco's snail cam blowers give higher output in more complex installations, such as those with long lengths of ducting hose or those with multiple bends. The blower is suitable for flexible mounting where a bracket is used to mount the blower to any solid surface. ..

(7)

218.37€ 216.18€ Ex Tax: 216.18€

Centrifugal Bilge Blowers Ocean 24v 1000m3 with Flange

Centrifugal Bilge Blowers Ocean 24v 1000m3 with FlangeHigh quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules. ..

(3)

213.50€ Ex Tax: 213.50€

Bilge Blower Vetus VENT7624 24V / 76mm

Bilge Blower Vetus VENT7624 24V / 76mm Vetus ventilation blower suitable for flange mounting onto the bulkhead. Features of the Vetus VENT7624 include - Ignition protected - Complies with ISO 9097 Marine Standard - Delrin impeller - Capacity 4 cubic metres (140 cu ft) per minute - Static pressure: 57mm H2O - Ideal for galley, toilet and engine room applications - For 24volts DC, 4 amp rating - Accepts 76mm id (3") vent hose Please note: Vetus do NOT recommend using this extraction ventilator to provide air to the main engine(s). Every marine engine is able to draw sufficient air by itself, provided of course, that the ventilation openings to the engine room are adequate. If a Vetus extraction ventilator is placed in the air duct, the electric motor may overheat, as the suction power of the engine may cause the fan to over rotate. The purpose of this Vetus ventilator, is to extract heat from the engine room when the engines are stopped, or when petro..

(10)

213.84€ 211.70€ Ex Tax: 211.70€

Bilge Blower Vetus VENT7612 12V 76mm

Bilge Blower Vetus VENT7612 12V 76mm Vetus ventilation blower suitable for flange mounting onto the bulkhead. Features of the Vetus VENT7612 include - Ignition protected - Complies with ISO 9097 Marine Standard - Delrin impeller - Capacity 4 cubic metres (140 cu ft) per minute - Static pressure: 57mm H2O - Ideal for galley, toilet and engine room applications - For 12volts dc, 8 amp rating - Accepts 76mm id (3") vent hose Please note: Vetus do NOT recommend using this extraction ventilator to provide air to the main engine(s). Every marine engine is able to draw sufficient air by itself, provided of course, that the ventilation openings to the engine room are adequate. If a Vetus extraction ventilator is placed in the air duct, the electric motor may overheat, as the suction power of the engine may cause the fan to over rotate. The purpose of this Vetus ventilator, is to extract heat from the engine room when the engines are stopped, or when petrol..

(14)

213.84€ 211.70€ Ex Tax: 211.70€

Air suction and ventilation hose 180 mm x 10mt

Air suction and ventilation hose 180 mm x 10mtAir suction and ventilation hose resistant to temperature, built in PVC coated tissue, self extinguishing V(TM)-O, according to UL94 and grade M2 according to NFP92 503 with steel wire reinforcement between the 2 layers. Temperature range : -20° C, +120° C. Rolls length 10 m. ..

(5)

213.49€ 211.35€ Ex Tax: 211.35€

Racor Element For 6000 Series Crankcase Systems (08 Grade)

Racor Element For 6000 Series Crankcase Systems (08 Grade) Genuine Racor CCV55274-08 high grade service filter element for Racor 6000 series open and closed crankcase vent filter unit. The 08 grade is a high density filter element which is suitable for petrol and diesel applications. Specifications Series CCV 6000 Series Brand Racor Open Closed Crankcase Systems Open|Closed Crankcase Ventilation Filter Element Filter Density High Filter Grade 8 ..

(3)

203.12€ 201.09€ Ex Tax: 201.09€

Air suction and ventilation hose 152 mm x 10mt

Air suction and ventilation hose 152 mm x 10mtAir suction and ventilation hose resistant to temperature, built in PVC coated tissue, self extinguishing V(TM)-O, according to UL94 and grade M2 according to NFP92 503 with steel wire reinforcement between the 2 layers. Temperature range : -20° C, +120° C. Rolls length 10 m. ..

(15)

202.01€ 199.99€ Ex Tax: 199.99€

Air suction and ventilation hose 120 mm x 10mt

Air suction and ventilation hose 120 mm x 10mtAir suction and ventilation hose resistant to temperature, built in PVC coated tissue, self extinguishing V(TM)-O, according to UL94 and grade M2 according to NFP92 503 with steel wire reinforcement between the 2 layers. Temperature range : -20° C, +120° C. Rolls length 10 m. ..

(11)

190.53€ 188.62€ Ex Tax: 188.62€

Centrifugal Bilge blowers Ocean 24v 750m3

Centrifugal Bilge blowers Ocean 24v 750m3High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules. Electric blower in strong white ABS, homologated by R.I.N.A, Complying with ISO 8849. Screws and shaft in stainless steel. Flex mount and very strong dynamic flange mount. Low current draw. Countinuous duty Best ratio on the market between volume air flow and compact size. All models are ignition protected, suitable for engine room...

(4)

177.85€ Ex Tax: 177.85€

Centrifugal Bilge blowers Ocean 12v 750m3

Centrifugal Bilge blowers Ocean 12v 750m3High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules. ..

(12)

177.85€ Ex Tax: 177.85€

Air suction and ventilation hose 110 mm x 10mt

Air suction and ventilation hose 110 mm x 10mtAir suction and ventilation hose resistant to temperature, built in PVC coated tissue, self extinguishing V(TM)-O, according to UL94 and grade M2 according to NFP92 503 with steel wire reinforcement between the 2 layers. Temperature range : -20° C, +120° C. Rolls length 10 m. ..

(11)

179.05€ 177.26€ Ex Tax: 177.26€

Air Hose for Bilge Blowers 90mm x 10mt

Air Hose for Bilge Blowers 90mm x 10mtSteel helical wire light PVC air bellow hose. For air supply and intake. ..

(10)

159.99€ Ex Tax: 159.99€

Inline Electric Blower HD Continuous 24v 1000m3

Inline Electric Blower HD Continuous 24v 1000m3In-line Heavy Duty electric blowers for continuous use. Large capacity with high efficiency silent fan designed with aerospace technology according to ISO8846 EN55014. ..

(11)

157.11€ Ex Tax: 157.11€

In-line electric blowers HD Continuous 12v-1000 m3/h

In-line electric blowers HD Continuous 12v-1000 m3/hIn-line Heavy Duty electric blowers for continuous use. Large capacity with high efficiency silent fan designed with aerospace technology according to ISO8846 EN55014. ..

(13)

157.11€ Ex Tax: 157.11€

Air Hose for Bilge Blowers 80mm x 10mt

Air Hose for Bilge Blowers 80mm x 10mtSteel helical wire light PVC air bellow hose. For air supply and intake. Air suction and ventilation hose resistant to temperature, built in PVC coated tissue, self extinguishing V(TM)-O, according to UL94 and grade M2 according to NFP92 503 with steel wire reinforcement between the 2 layers. Temperature range : -20° C, +120° C. Rolls length 10 m...

(12)

156.43€ Ex Tax: 156.43€