Clutch Pumps

Clutch Pumps

Clutch Pumps

Show:
Sort By:

Clutch Pump Jabsco 51270-2011

Clutch Pump Jabsco 51270-2011 The Jabsco manual foot mounted clutched pump is suitable for bilge and deckwash applications. The Jabsco clutched pump features 2" BSP connections and is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This standard duty bilge and deckwash pump has a mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. This Jabsco Pump 51270-2011 has the following Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw X3001-176FB 5 2 End Cover 12062-0000 1 3 Gasket 816-0000 1 4 Impeller 17936-0001B 1 5 Wearplate 2574-0000 1 6 Seal Assembly 21849 1 7 Cam 834-0001 1 8 Screw (3 Pack) 91005-0040 1 10 O-Ring X4020-324A 1 11 Bearing Housing 50273-0000 1 14 Seal 92701-0180 1 15 Bearing SP2601-0458 1 17 Shaft 5127..

(15)

2,600.00€ 2,574.00€ Ex Tax: 2,574.00€

Clutch Pump Jabsco 51270-0011

Clutch Pump Jabsco 51270-0011 Jabsco manual flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has 2" BSP ports and is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This standard duty bilge and deckwash pump has a mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. Jabsco Pump 51270-0011 Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw SP1095-0640 5 2 End Cover 12062-0000 1 3 Gasket 816-0000 1 4 Impeller 17936-0001B 1 5 Wearplate 2574-0000 1 6 Seal Assembly 21849 1 7 Cam 834-0001 1 8 Screw (3 Pack) 91005-0040 1 10 O-Ring X4020-324A 1 11 Bearing Housing 50273-0000 1 13 Bolt SP1095-28 4 14 Seal 92701-0180 1 15 Bearing SP2601-0458 1 17 Shaft 51277-0000 1 21 Bearing SP26..

(8)

2,600.00€ 2,574.00€ Ex Tax: 2,574.00€

Clutch Pump Jabsco 51220-0011

Clutch Pump Jabsco 51220-0011 The Jabsco manual flange mounted clutched pump is suitable for bilge and deckwash applications. The Jabsco clutched pump features 1-1/2" BSP connections and is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This standard duty bilge and deckwash pump has a mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. This Jabsco Pump 51220-0011 has the following Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw SP1095-0640 5 2 End Cover 12062-0000 1 3 Gasket 816-0000 1 4 Impeller 17935-0001B 1 5 Wearplate 2574-0000 1 6 Seal Assembly 21849 1 7 Cam 834-0001 1 8 Screw (3 Pack) 91005-0040 1 9 Body 10634 1 10 O-Ring X4020-324A 1 11 Bearing Housing 50273-0000 1 13 Bolt SP1095-28 4 14 Seal 92701-018..

(6)

2,350.00€ 2,326.50€ Ex Tax: 2,326.50€

Clutch Pump Jabsco 51200-2011

Clutch Pump Jabsco 51200-2011 Jabsco manual foot mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump features 1-1/2" BSP connections and is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This standard duty bilge and deckwash pump has a mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. Jabsco Pump 51200-2011 Spare Parts: Part ID Spare Parts Part Numbers Quantity 1 Screw X3001-176FB 5 2 End Cover 12062-0000 1 3 Gasket 816-0000 1 4 Impeller 17935-0001B 1 5 Wearplate 2574-0000 1 6 Cam 834-0001 1 7 Screw (3 Pack) 91005-0040 1 10 Screw X3001-180F 3 11 Outer Guide Tube 51089-0000 1 12 Clutch Spring 51213-0000 1 13 Inner Guide Tube 51088-0000 1 14 Engaging Mechanism 51210-0000 1 15 Retaining Bolt 5..

(15)

2,350.00€ 2,326.50€ Ex Tax: 2,326.50€

Clutch Pump Jabsco 50270-2311 (24V)

Clutch Pump Jabsco 50270-2311 (24V) Jabsco 24V foot mounted clutched pump for bilge and deckwash applications. The pump has 2" BSP female ports and is 270mm long with a 180mm pulley diameter (1B pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50270-2311 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17936-0001B 1 4 Wearplate 2574-0000 1 6 Cam 6988-0000 1 ..

(6)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-2211

Clutch Pump Jabsco 50270-2211 The Jabsco 12V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 2" BSP female threaded ports and measures 270mm long with a 180mm pulley diameter (1B pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50270-2211 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17936-00..

(8)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-2111

Clutch Pump Jabsco 50270-2111 The Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 2" BSP female threaded ports and measures 270mm long with a 180mm pulley diameter (2A pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. This Jabsco Pump 50270-2111 has the following Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 ..

(10)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-2011

Clutch Pump Jabsco 50270-2011 Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 2" BSP female ports and is 270mm long with a 180mm pulley diameter (2A pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50270-2011 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17936-0001B 1 4 Wearplate 2574-0000 1 6 Cam 6988-0000 1 7 Scr..

(3)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-0311

Clutch Pump Jabsco 50270-0311 The Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 2" nominal bore flanged ports with 2" BSP counter flanges and measures 270mm long with a 180mm pulley diameter (1B pulley) and 173mm across the ports. The Jabsco clutched pump is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze constructed body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. This Jabsco Pump 50270-0311 has the following Spare Parts: Part ID Spare Parts Part Number Quantity 1 En..

(6)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-0211

Clutch Pump Jabsco 50270-0211 Jabsco 12V flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has a 2" flange and is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 3 metres. 1B pulley. Jabsco Pump 50270-0211 Spare Parts: Part ID Spare Parts Part Numbers Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17936-0001B 1 4 Wearplate 2574-0000 1 6 Cam 6988-0000 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil 12V SP2300-0063FCUS 1 17 Screw X3001-176FB 3 18 Screw SP1095..

(6)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-0111

Clutch Pump Jabsco 50270-0111 Jabsco manual foot mounted clutched pump 50270-0111 for bilge and deckwash applications. The Jabsco clutched pump has 2" BSP connections and is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This standard duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 3 metres. Jabsco Pump 50270-0111 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17936-0001B 1 4 Wearplate 2574-0000 1 6 Cam 6988-0000 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil 24V SP2300-0064FCUS 1 17 Screw X3001-176FB 3 18 Sc..

(5)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Jabsco 50270-0011

Clutch Pump Jabsco 50270-0011 Jabsco 12V flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has a 2" flange and is capable of pumping 267 litres per minute (59 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 3 metres. (2A pulley). Jabsco Pump 50270-011 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17936-0001B 1 4 Wearplate 2574-0000 1 6 Cam 6988-0000 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil (12V) SP2300-0063FCUS 1 17 Screw X3001-176FB 3 18 Screw SP10..

(15)

2,200.00€ 2,178.00€ Ex Tax: 2,178.00€

Clutch Pump Johnson F8B-5000-VF

Clutch Pump Johnson F8B-5000-VF The Johnson F8B-5000-VF clutched pump, constructed from bronze, is suitable for deckwash and bilge applications. The clutched pump has a neoprene impeller, mechanical seal and the pump self primes. This Johnson pump has 1-1/2" flange connections and has a flow rate of 282 litres per minute (2000 rpm). Pump dimensions: Height 154mm, Length 256mm, Width 152mm. Suitable for 12V or 24V systems. Clutch sold separately. 10-13025-99 Spare Parts: Position Spare Part Part Number 1 Impeller 09-819B 2 Cam 01-42680 3 Screw 01-46794-02 4 Seal 09-0.2247.051 5 Gasket / O-Ring 01-42424 6 End Cover 01-42422-1 7 Screw 0.0144.200 8 Wearplate 01-42423 9 Shaft 01-35138 10 Bearing 0.3431.780 11 Bearing Seal 0.2234.337 Service Kit 09-45579 ..

(9)

1,900.00€ 1,881.00€ Ex Tax: 1,881.00€

Clutch Pump Jabsco 51080-2001

Clutch Pump Jabsco 51080-2001 Jabsco manual foot mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has 1" BSP connections and is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This standard duty bilge and deckwash pump has a mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. Jabsco Pump 51080-2001 Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw X3001-147F 6 2 End Cover 11831-0000 1 3 Gasket 890-0000 1 4 Impeller & Gasket Kit 17937-0001-P 1 5 Wearplate 4156-0000 1 6 Cam 934-0000 1 7 Screw (3 Pack) 91004-0090 1 9 & 14 Engaging Mechanism Assembly 51090-0000 1 10 Screw X3001-178F 3 11 Outer Guide Tube 51089-0000 1 12 Spring 51093-0000 1 13 Inner Guide Tube 51088-0000 1 15 Retain..

(5)

1,800.00€ 1,782.00€ Ex Tax: 1,782.00€

Clutch Pump Jabsco 50220-0311

Clutch Pump Jabsco 50220-0311 Jabsco 24V flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has a 1-1/2" flange and is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. (1B pulley). Jabsco Pump 50220-0311 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17935-0001B 1 4 Wearplate 2574-0000 1 6 Cam 834-0001 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil 24V SP2300-0064FCUS 1 17 Screw X3001-176FB 3 18 Screw ..

(6)

1,750.00€ 1,732.50€ Ex Tax: 1,732.50€

Clutch Pump Jabsco 50220-0211

Clutch Pump Jabsco 50220-0211 Jabsco 12V flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has a 1-1/2" flange and is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. 1B pulley. Jabsco Pump 50220-0211 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17935-0001B 1 4 Wearplate 2574-0000 1 6 Cam 834-0001 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil 12V SP2300-0063FCUS 1 17 Screw X3001-176FB 3 18 Screw SP..

(6)

1,750.00€ 1,732.50€ Ex Tax: 1,732.50€

Clutch Pump Jabsco 50220-0111

Clutch Pump Jabsco 50220-0111 Jabsco 24V flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has a 1-1/2" flange and is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. (2A pulley). Jabsco Pump 50220-0111 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17935-0001B 1 4 Wearplate 2574-0000 1 6 Cam 834-0001 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil 24V SP2300-0064FCUS 1 17 Screw X3001-176FB 3 18 Screw ..

(7)

1,750.00€ 1,732.50€ Ex Tax: 1,732.50€

Clutch Pump Jabsco 50220-0011

Clutch Pump Jabsco 50220-0011 Jabsco 12V flange mounted clutched pump for bilge and deckwash applications. The Jabsco clutched pump has a 1-1/2" flange and is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a mechanical shaft seal with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. The pump can self-prime up to 2.4 metres. (2A pulley). Jabsco Pump 50220-0011 Spare Parts: Part ID Spare Parts Part Number Quantity 1 End Cover 12062-0000 1 2 Gasket 816-0000 1 3 Impeller 17935-0001B 1 4 Wearplate 2574-0000 1 6 Cam 834-0001 1 7 Screw (3 Pack) 91005-0040 1 9 O-Ring X4020-324A 1 10 Bearing Housing 50273-0000 1 12 Bolt SP1095-28 4 13 Seal 92701-0180 1 14 Clutch Adaptor 52201-0200B 1 16 E/M Clutch Field Coil (12V) SP2300-0063FCUS 1 17 Screw X3001-176FB 3 18 Scre..

(12)

1,750.00€ 1,732.50€ Ex Tax: 1,732.50€

Clutch Pump Jabsco 50200-2311

Clutch Pump Jabsco 50200-2311 The Jabsco 24V foot mounted clutched pump for bilge and deckwash applications. The pump has 1-1/2" BSP female ports and is 200mm long with a 180mm pulley diameter (1B pulley) and 152mm across the ports. The Jabsco clutched pump is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50200-2311 Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw X3001-176FB 6 2 End Cover 12062-0000 1 3 Gasket 816-0000 1 4 Impeller 17935-0001B 1 5 Wearpla..

(8)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Clutch Pump Jabsco 50200-2211

Clutch Pump Jabsco 50200-2211 Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1-1/2" BSP female ports and is 200mm long with a 180mm pulley diameter (1B pulley) and 152mm across the ports. The Jabsco clutched pump is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50200-2211 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Screw | X3001-176FB | 6 2 | End Cover | 12062-0000 | 1 3 | Gasket | 816-0000 | 1 4 | Impeller | 17935-0001B ..

(4)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Clutch Pump Jabsco 50200-2111

Clutch Pump Jabsco 50200-2111 Jabsco 24V foot mounted clutched pump for bilge and deckwash applications. The pump has 1-1/2" BSP female ports and is 200mm long with a 180mm pulley diameter (2A pulley) and 152mm across the ports. The Jabsco clutched pump is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50200-2111 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Screw | X3001-176FB | 6 2 | End Cover | 12062-0000 | 1 3 | Gasket | 816-0000 | 1 4 | Impeller | 17935-0001B ..

(11)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Clutch Pump Jabsco 50200-2011

Clutch Pump Jabsco 50200-2011 The Jabsco 12V foot mounted clutched pump is for bilge and deckwash applications. The pump has 1-1/2" BSP female ports and measures 200mm long with a 180mm pulley diameter (2A pulley) and 152mm across the ports. The Jabsco clutched pump is capable of pumping 195 litres per minute (43 gallons) at 3 metres total head. The starting torque of this clutch pump is 17.6Nm. This heavy duty bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 3 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50200-2011 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Screw | X3001-176FB | 6 2 | End..

(10)

1,300.00€ 1,287.00€ Ex Tax: 1,287.00€

Electro-Magnetic Clutch Pump Johnson 2" F9B-5600

Electro-Magnetic Clutch Pump Johnson 2" F9B-5600With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage whenever the pump starts priming air, thereby preventing dry running and pump damage. Automatically controlled pumps are available in sizes from 1" to 2½" (20 l/min to 625 l/min), with clutches in 12 or 24 volts. Wear parts are easily replaceable and service kits are available for all standard models. Vacuum Switch as extra accessory. Note! Clutch to be ordered separately. The Johnson F9B-5600 clutched pump, constructed from bronze, is suitable for deckwash and bilge applications. The clutched pump has a neoprene impeller, mechanical seal and the pump self primes. This Johnson pump has 2" BSP connections and has a flow rate of 37..

(3)

1,201.28€ 1,189.27€ Ex Tax: 1,189.27€

Jabsco 50080-2301 Bronze Clutch Pump (24V / 1" BSP / Single B)

Jabsco 50080-2301 Bronze Clutch Pump (24V / 1" BSP / Single B) The Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 1" BSP female threaded ports and measures 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze constructed body, stainless steel shaft and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. This Jabsco Clutch Pump 50080-2301 has the following Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Screw | X3001-147F | 6 2 | End Cover | 11831-0000 | 1 3 | Gasket | 890-0000 | 1 4 | Imp..

(3)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Jabsco 50080-2001 Bronze Clutch Pump (12V / 1" BSP / Twin A)

Jabsco 50080-2001 Bronze Clutch Pump (12V / 1" BSP / Twin A) The Jabsco 12V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 1" BSP female threaded ports and measures 160mm long with a 180mm pulley diameter (2A pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze body, stainless steel shaft and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco 50080-2001 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Screw | X3001-147F | 6 2 | End Cover | 11831-0000 | 1 3 | Gasket | 890-0000 | 1 4 | Impeller & Gasket Kit | 17937-0001-P | 1 5 | Wearpla..

(12)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Clutched Pump Jabsco 50580-2301

Clutched Pump Jabsco 50580-2301 1" bronze bilge and deck wash pump, 80-size, foot mounted with BSP ports and a 24V DC electric clutch with 1B pulley. This Jabsco Clutch Pump has a 180mm diameter pulley with an Output at 1500 RPM: 80 LPM (17.5 GPM) at 3m total head. This pump has a bronze body, stainless steel shaft, mechanical shaft seal and a Neoprene impeller fitted as standard for maximum performance with clean or lightly contaminated water (Nitrile option for use with oily water). Can handle moderate amounts of suspended solid matter. Jabsco Pump 50580-2301 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Bearing | SP2601-0468 | 2 3 | Cam | 53082-0000 | 1 4 | End Cover | 50355-0000 | 1 5 | Electro Magnetic Clutch Field Coil (24V) | SP2300-0064FCUS | 1 6 | Screw | X3001-176FB | 7 7 | Impeller & Gasket Kit | 920-0001-P | 1 8 | Key | SP1401-10 | 1 9 | Seal Assembly | 96080-0620 | 1 10 | O-Ring..

(5)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Clutched Pump Jabsco 50580-2201

Clutched Pump Jabsco 50580-2201 Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and is 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco 50580-2201 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Bearing | SP2601-0468 | 2 3 | Cam | 53082-0000 | 1 4 | End Cover | 50355-0000 | 1 5 | Electro Magnetic Clutch - Field Coil 12V | SP2300-0063FCUS | 1 6 |..

(14)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Clutched Pump Jabsco 50580-2101

Clutched Pump Jabsco 50580-2101 The Jabsco 24V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 1" BSP female ports and measures 160mm long with a 180mm pulley diameter (2A pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Pump 50580-2101 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Bearing | SP2601-0468 | 2 3 | Cam | 53082-0000 | 1 4 | End Cover | 50355-0000 | 1 5 | Electro Magnetic Clut..

(15)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Clutched Pump Jabsco 50580-2001

Clutched Pump Jabsco 50580-2001 The Jabsco 12V foot mounted clutched pump is suitable for bilge and deckwash applications. The pump features 1" BSP female ports and measures 160mm long with a 180mm pulley diameter (2A pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze body, stainless steel shaft, mechanical shaft seal and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water applications. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco 50580-2001 Spare Parts: Part ID | Spare Parts | Part Number | Quantity 1 | Bearing | SP2601-0468 | 2 3 | Cam | 53082-0000 | 1 4 | End Cover | 50355-0000 | 1 5 | E/M Clutch - Field Coil 12..

(14)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Clutch Pump Jabsco 50080-2201

Clutch Pump Jabsco 50080-2201 Jabsco 12V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and measures 160mm long with a 180mm pulley diameter (1B pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze body, stainless steel shaft and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Clutch Pump 50080-2101 Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw X3001-147F 6 2 End Cover 11831-0000 1 3 Gasket 890-0000 1 4 Impeller & Gasket Kit 17937-0001-P 1 5 Wearplate 4156-0000 1 6 Seal SP2700-1027B 1 ..

(9)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Clutch Pump Jabsco 50080-2101

Clutch Pump Jabsco 50080-2101 Jabsco 24V foot mounted clutched pump for bilge and deckwash applications. The pump has 1" BSP female ports and measures 160mm long with a 180mm pulley diameter (2A pulley). The Jabsco clutched pump is capable of pumping 80 litres per minute (17.5 gallons) at 3 metres total head. This bilge and deckwash pump has a bronze body, stainless steel shaft and comes with a neoprene impeller fitted for maximum performance when pumping clean or slightly contaminated water. A nitrile impeller may be fitted for use with oily water. The pump can self-prime up to 2 metres of vertical lift and is tolerant to moderate amounts of suspended solids. Jabsco Clutch Pump 50080-2101 Spare Parts: Part ID Spare Parts Part Number Quantity 1 Screw X3001-147F 6 2 End Cover 11831-0000 1 3 Gasket 890-0000 1 4 Impeller & Gasket Kit 17937-0001-P 1 5 Wearplate 4156-0000 1 6 Seal SP2700-1027B 1 ..

(3)

1,200.00€ 1,188.00€ Ex Tax: 1,188.00€

Electromagnetic Clutch Pump Nautic M 40mm 120l / m 24v

Electromagnetic Clutch Pump Nautic M 40mm 120l / m 24vBronze impeller and pump with Stainless Steel shaft and electromagnetic clutch. Vertical lift max 15 m – 1400 RPM. For fresh and salt water. ..

(7)

962.01€ 952.39€ Ex Tax: 952.39€

Electromagnetic Clutch Pump Nautic M 30mm 75l / m 24V

Electromagnetic Clutch Pump Nautic M 30mm 75l / m 24VBronze impeller and pump with Stainless Steel shaft and electromagnetic clutch. Vertical lift max 15 m – 1400 RPM. For fresh and salt water. ..

(10)

921.03€ 911.82€ Ex Tax: 911.82€

Electromagnetic Clutch Pump Nautic M 30mm 75l / m 12V

Electromagnetic Clutch Pump Nautic M 30mm 75l / m 12VBronze impeller and pump with Stainless Steel shaft and electromagnetic clutch. Vertical lift max 15 m – 1400 RPM. For fresh and salt water. ..

(12)

921.03€ 911.82€ Ex Tax: 911.82€

Ancor Manual Clutch Pump 1" 1/2 - 250 lt/m

Ancor Manual Clutch Pump 1" 1/2 - 250 lt/mLt/min capacity fresh and salt water manual clutch pumps. Nitrile impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. ..

(15)

857.34€ 848.77€ Ex Tax: 848.77€

Ancor Manual Clutch Pump 1" 1/4 - 200 lt/m

Ancor Manual Clutch Pump 1" 1/4 - 200 lt/m200 Lt/min capacity fresh and salt water manual clutch pump. Nitrile impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. ..

(5)

848.28€ 839.79€ Ex Tax: 839.79€

Electro-Magnetic Clutch Pump Johnson F8B-5001 1 1/2"

Electro-Magnetic Clutch Pump Johnson F8B-5001 1 1/2"With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage whenever the pump starts priming air, thereby preventing dry running and pump damage. Automatically controlled pumps are available in sizes from 1" to 2½" (20 l/min to 625 l/min), with clutches in 12 or 24 volts. Wear parts are easily replaceable and service kits are available for all standard models. Vacuum Switch as extra accessory. Note! Clutch to be ordered separately. F8B-5001 Clutch Pump 1-1/2" BSP (No Clutch)..

(5)

737.59€ 730.21€ Ex Tax: 730.21€

Electromagnetic Clutch Pump IFE 24v 258lt minute

Electromagnetic Clutch Pump IFE 24v 258lt minuteBrass impeller and pump with Stainless Steel shaft and electromagnetic clutch. Max lift 65 m – 1400 RPM. For fresh and salt water. ..

(9)

668.33€ 661.64€ Ex Tax: 661.64€

Electromagnetic Clutch Pump IFE 12v 258lt minute

Electromagnetic Clutch Pump IFE 12v 258lt minuteBrass impeller and pump with Stainless Steel shaft and electromagnetic clutch. Max lift 65 m – 1400 RPM. For fresh and salt water. ..

(15)

668.33€ 661.64€ Ex Tax: 661.64€

Magnetic Clutch Pump Ancor 1 1/4" 12v

Magnetic Clutch Pump Ancor 1 1/4" 12v200 Lt/min capacity fresh and salt water electromagnetic clutch pump. Nitrile impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. ..

(3)

593.01€ 587.08€ Ex Tax: 587.08€

Manual Clutch Pump Ancor 100lt / minute

Manual Clutch Pump Ancor 100lt / minute100 and 250 Lt/min capacity fresh and salt water manual clutch pumps. Nitrile impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. ..

(8)

531.13€ 525.82€ Ex Tax: 525.82€

Johnson Electromagnetic Clutch (12V / Twin A Groove)

Johnson Electromagnetic Clutch (12V / Twin A Groove) The Johnson electromagnetic clutch is suitable for use with Johnson flexible impeller clutch pumps. The 2 x A groove on this clutch should suit that on the engine pulley. The alternative Johnson reference for this clutch is: 0.3454.001. Voltage 12V DC Brand Johnson Diameter 178mm ..

(11)

517.94€ 512.76€ Ex Tax: 512.76€

Johnson Electromagnetic Clutch (24V / Twin A Groove)

Johnson Electromagnetic Clutch (24V / Twin A Groove) The Johnson electromagnetic clutch is suitable for use with Johnson flexible impeller clutch pumps. The 2 x A groove on this clutch should suit that on the engine pulley. The alternative Johnson reference for this clutch is: 0.3454.002. Voltage 24V DC Brand Johnson Diameter 178mm ..

(13)

510.38€ 505.28€ Ex Tax: 505.28€

Johnson Electromagnetic Clutch (12V / Single B Groove)

Johnson Electromagnetic Clutch (12V / Single B Groove) The Johnson electromagnetic clutch is suitable for use with Johnson flexible impeller clutch pumps. The 1 x B groove on this clutch should suit that on the engine pulley. The alternative Johnson reference for this clutch is: 0.3454.003. Voltage 12V DC Brand Johnson Diameter 178mm ..

(15)

505.06€ 500.01€ Ex Tax: 500.01€

Electro-Magnetic Clutch Pump 1" F7B-5001

Electro-Magnetic Clutch Pump 1" F7B-5001With an electro-magnetic clutch you will have pumping power whenever needed, at a push of a button, without being at the pump. Combined with a vacuum switch (recommended for bilge pump application), the clutch will automatically disengage whenever the pump starts priming air, thereby preventing dry running and pump damage. Automatically controlled pumps are available in sizes from 1" to 2½" (20 l/min to 625 l/min), with clutches in 12 or 24 volts. Wear parts are easily replaceable and service kits are available for all standard models. Vacuum Switch as extra accessory. ***Note! Clutch have to be ordered separately. The Johnson F7B-5001 clutched pump is for deckwash and bilge applications. The bronze clutched pump has a neoprene impeller, mechanical seal and the pump self primes. This Johnson pump has 1" BSP ports and has a flow rate of 107 litres per minute (2000 rpm). ..

(15)

489.00€ 484.11€ Ex Tax: 484.11€

Ancor PM36 with electromagnetic clutch

Ancor PM36 with electromagnetic clutchBronze self-priming pumps, input 1’, capacity It./min. 28/96. Self-priming flexible impeller pumps with electromagnetic clutch. Spare impeller art. 2727104 Bronze body Neoprene impeller cooling pump...

(11)

443.25€ 438.82€ Ex Tax: 438.82€

Jabsco Electric Clutch Pump Pulley SP2300-0063RA (1B)

Jabsco Electric Clutch Pump Pulley SP2300-0063RA (1B) This is a Jabsco 1-B groove pulley set suitable for the following Jabsco electric clutched pumps: 21960 series, 10670 series, 10680 series, 50080/50580 series, 50200 series, 50220 series and 50270 series. Specifications Brand Jabsco Model SP2300-0063RA Suitability Jabsco 21960, 10670, 10680, 50080/50580, 50200, 50220 & 50270 Series Electric Clutched Pumps ..

(4)

384.46€ 380.62€ Ex Tax: 380.62€

Jabsco Electric Clutch Pump Pulley SP2300-0061RA (2A)

Jabsco Electric Clutch Pump Pulley SP2300-0061RA (2A) This Jabsco 2A pulley set is suitable for electric clutched pumps. The pulley is a twin A groove pulley for 1/2" belting. Specifications Brand Jabsco Model SP2300-0061RA ..

(3)

384.46€ 380.62€ Ex Tax: 380.62€

Jabsco Field Coil SP2300-0064FC for Magnetic Clutch (24 Volt)

Jabsco Field Coil SP2300-0064FC for Magnetic Clutch (24 Volt) Jabsco SP2300-0064FC Field Coil for electro-magnetic clutch unit. Voltage: 24 volts Outside diameter: 140mm 10670 Series, 10680 Series, 21960 Series, 50080/50580 Series, 50220 Series, 50270 Series. Specifications Voltage 24V DC Brand Jabsco Diameter OD: 140mm Model SP2300-0064FC Suitability See Description Bobine inductrice 24V Ref.: JABSP2300-0064FCUS Désignation: Bobine inductrice 24V Tension: 24 V Description: ..

(13)

317.92€ 314.74€ Ex Tax: 314.74€

Jabsco Field Coil SP2300-0063FC for Magnetic Clutch (12 Volt)

Jabsco Field Coil SP2300-0063FC for Magnetic Clutch (12 Volt) Jabsco SP2300-0063FC Field Coil for electro-magnetic clutch unit. Voltage: 12 volts Outside diameter: 140mm 10670 Series, 10680 Series, 21960 Series, 50080/50580 Series, 50220 Series, 50270 Series. Specifications Voltage 12V DC Brand Jabsco Diameter OD: 140mm Model SP2300-0063FC Suitability See Description Bobine inductrice 12V Ref.: JABSP2300-0063FCUS Désignation: Bobine inductrice 12V Modèle: SP2300-0063FCUS Descrip..

(6)

317.92€ 314.74€ Ex Tax: 314.74€

Service Kit for Johnson F9b-5600

Service Kit for Johnson F9b-5600Johnson fresh and salt water pump. Neoprene impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. Attention: Electromagnetic clutch with pulley sold separately. ..

(14)

247.08€ Ex Tax: 247.08€

Johnson 0.3454.002 Electro-Magnetic Clutch Pulley 24V 2xA 7"

Johnson 0.3454.002 Electro-Magnetic Clutch Pulley 24V 2xA 7"Electro-Magnetic Clutches Pulleys for clutch pumps F7B-5001, F8B-5001, F9B-5600 , F95B-5000, F7B-5000 , F8B-5000 VF , F8B-5000 TSS , F9B-5600 VF, F9B-5600 TSS ..

(8)

247.08€ Ex Tax: 247.08€

johnson 0.3454.003 Electro-Magnetic Clutch Pulley 12V 1xB 7"

johnson 0.3454.003 Electro-Magnetic Clutch Pulley 12V 1xB 7"Johnson fresh and salt water pump. Neoprene impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. Attention: Electromagnetic clutch with pulley sold separately. ..

(3)

244.60€ Ex Tax: 244.60€

Johnson 0.3454.001 Electro-Magnetic Clutch Pulley 12V 2xA 7"

Johnson 0.3454.001 Electro-Magnetic Clutch Pulley 12V 2xA 7"Electro-Magnetic Clutches Pulleys for clutch pumps F7B-5001, F8B-5001, F9B-5600 , F95B-5000, F7B-5000 , F8B-5000 VF , F8B-5000 TSS , F9B-5600 VF, F9B-5600 TSS ..

(5)

228.02€ Ex Tax: 228.02€

Johnson 0.3454.004 Electro-Magnetic Clutch Pulley 24V 1xB 7"

Johnson 0.3454.004 Electro-Magnetic Clutch Pulley 24V 1xB 7"Johnson fresh and salt water pump. Neoprene impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. Attention: Electromagnetic clutch with pulley sold separately. ..

(4)

217.79€ 215.61€ Ex Tax: 215.61€

Kit Reparation for Pump Ancor Cj018 / 018e

Kit Reparation for Pump Ancor Cj018 / 018e200 Lt/min capacity fresh and salt water electromagnetic clutch pump. Nitrile impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. ..

(6)

106.67€ 97.28€ Ex Tax: 97.28€

Kit Reparation for Clutch Pump Johnson F7b-5001

Kit Reparation for Clutch Pump Johnson F7b-5001Johnson fresh and salt water pump. Nitrile impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM. Attention: Electromagnetic clutch with pulley sold separately. ..

(9)

102.61€ 93.58€ Ex Tax: 93.58€