Impellers for Water Pumps

Impellers for Water Pumps

Impellers for Water Pumps

Show:
Sort By:

Johnson Neoprene Pump Impeller for Johnson F95 Pump Models (12 Blade)

Johnson Neoprene Pump Impeller for Johnson F95 Pump Models (12 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F95 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has eight blades and is supplied complete with lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump impellers are manufactured in strict compliance with the pump specifications set by the engine manufact..

(4)

672.86€ 666.14€ Ex Tax: 666.14€

Jabsco Flexible Neoprene Pump Impeller (12 Blades)

Jabsco Flexible Neoprene Pump Impeller (12 Blades) The Jabsco 17938-0001 flexible neoprene impeller has 12 impeller blades and is suitable for use with Volvo Penta D12 and D13 engines, and the following Jabsco pumps: - Jabsco 29830-0001 and 29830-0101 pumps - Jabsco 50570-0001 pumps as fitted to Volvo Penta D13 engines - Jabsco 50680-0031 pumps as fitted to Volvo Penta D13 commercial engines - Jabsco 50500-0001 pumps as fitted to Volvo Penta D16 engines The Jabsco neoprene flexible impellers are used for pumping fresh or salt water. Neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the in..

(15)

381.98€ 378.16€ Ex Tax: 378.16€

Impeller Johnson 09-842B

Impeller Johnson 09-842BSPX FLOW Johnson Pump original impellers. ..

(3)

341.42€ 338.00€ Ex Tax: 338.00€

Jabsco 17370-0001 Neoprene Impeller

Jabsco 17370-0001 Neoprene Impeller This Jabsco 17370-0001 Neoprene Impeller is for the following pumps: 18200-0000, 18200-0002, 18760-0013, 18760-0001, 18760-0002, 18760-0003, 18760-0004, 18760-3000, 17970-0000, 17360-1001. The Jabsco 17370-0001 Flexible Neoprene Impeller replaces the following Impellers: Caterpillar Impellers: 3N1888, 3N4859, 3N8459, 3406 & 3408 Cummins Impellers: 217308, 3008503 Detroit Diesel Impeller: 8927570 The Jabsco 17370-0001 flexible neoprene impeller has 12 impeller blades and a double flat drive. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump..

(7)

331.54€ 328.23€ Ex Tax: 328.23€

Johnson Neoprene Pump Impeller for Johnson F9 Pump Models (9 Blade)

Johnson Neoprene Pump Impeller for Johnson F9 Pump Models (9 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F9 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has nine blades and is supplied complete with 2 x lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-802B can be used to replace the Jabsco 6760-0001 Europe and USA flexible impeller. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump impel..

(12)

296.37€ 293.40€ Ex Tax: 293.40€

Johnson Neoprene Pump Impeller for Johnson F9 Pump Models (12 Blade)

Johnson Neoprene Pump Impeller for Johnson F9 Pump Models (12 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F9 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has twelve blades and is supplied complete with lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-814B can be used to replace the Jabsco 21676-0001 Europe and 17936-0001 USA flexible impellers as well as Orbitrade 15814 and Volvo Penta 875814. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and..

(11)

296.37€ 293.40€ Ex Tax: 293.40€

Jabsco 17936-0001 Neoprene Impeller

Jabsco 17936-0001 Neoprene Impeller This Jabsco Neoprene Impeller is suitable for the following Pumps: Jabsco 10660, 10590-0111, 10590-0231, 10590-0341, 10660-200, 11100-0601, 11100-0641, 17490-0001, 18300-0000, 18320-0000, 18320-0001, 18320-0002, 18340-0000, 18370-0000, 22040-01, 22040-0131, 22040-0501, 22040-0531, 23010-0131, 23010-0531, 50270-0011, 50270-0111, 50270-0211, 50270-0311, 50270-0911, 50270-2011, 50270-2111, 50270-2211, 50270-2311, 50270-2911, 52270-0011, 52270-2011, 6980-0001, 6980-0002, 6980-0003, 6980-0004, 6980-0005, 6980-0006, 6980-0011, 6980-0411 and 6980-3000. The Jabsco 17936-0001 Flexible Neoprene Impeller replaces the following Impellers: - Caterpillar impeller: 4L8470 - Cummins impeller: 3008503 - Detroit Diesel impellers: 5196168, 5198550 & 8924839 - Jabsco impellers: 21676-0001 & 17936-0001 - Johnson impeller: 09-814B - Man impeller: 50.06506-0073 - Perkins impeller: 0460027 ..

(9)

248.71€ 246.23€ Ex Tax: 246.23€

Impeller Johnson 09-820b

Impeller Johnson 09-820bSPX FLOW Johnson Pump original impellers. ..

(11)

245.53€ 243.08€ Ex Tax: 243.08€

Sherwood Impeller 30000k

Sherwood Impeller 30000kDim. Ø int.mm. 24.35 Ø ext.mm.114.3 thickness mm.109.5, nr.10 blades ..

(8)

217.81€ Ex Tax: 217.81€

Johnson Neoprene Pump Impeller for Johnson F75 Pump Models (12 Blade)

Johnson Neoprene Pump Impeller for Johnson F75 Pump Models (12 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F75 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has eight blades and is supplied complete with lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump impellers are manufactured in strict compliance with the pump specifications set by the engine manufact..

(8)

197.52€ 195.55€ Ex Tax: 195.55€

Jabsco Neoprene Pump Impeller with 8 Blades

Jabsco Neoprene Pump Impeller with 8 Blades The Jabsco 8981-0005B flexible neoprene impeller has 8 impeller blades and a single flat drive. Also used in the following Jabsco pumps: 30520-0001, 30520-2001, 30520-4001 and 30560-3102. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. This Impeller has an M profile. ..

(3)

189.58€ 187.68€ Ex Tax: 187.68€

Jabsco Flexible Nitrile Pump Impeller (Ding Drive Keyway / 12 Blades)

Jabsco Flexible Nitrile Pump Impeller (Ding Drive Keyway / 12 Blades) The Jabsco 5929-0003 flexible nitrile impeller has 12 impeller blades and a ding drive. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. The impeller is also used in Jabsco pump model 11810. This Impeller has a K profile. ..

(12)

189.50€ 187.60€ Ex Tax: 187.60€

Jabsco Flexible Nitrile Pump Impeller (Twin Flat Drive / 8 Blades)

Jabsco Flexible Nitrile Pump Impeller (Twin Flat Drive / 8 Blades) The Jabsco 14282-0003B flexible nitrile impeller has 8 impeller blades and a twin flat drive. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. This impeller is suitable for use with Jabsco 30520-7000 and 53080-2003 pumps. This Impeller has an M ..

(7)

179.57€ 177.78€ Ex Tax: 177.78€

Jabsco 14282-0001B Neoprene Pump Impeller (Twin Flat Drive / 8 Blades)

Jabsco 14282-0001B Neoprene Pump Impeller (Twin Flat Drive / 8 Blades) The Jabsco 14282-0001B flexible neoprene impeller has 8 impeller blades and a double flat drive. This neoprene impeller is suitable for industrial pump applications. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. This Impeller has an M profile. ..

(9)

179.57€ 177.78€ Ex Tax: 177.78€

Impeller Sherwood 22000k

Impeller Sherwood 22000kSize Ø int.mm. 20.7 Ø 114.3 109.5 mm thick est.mm. nr. 10 blades ..

(14)

171.97€ Ex Tax: 171.97€

Drive Force Impeller Puller for Impellers over 65mm - 114mm Diameter

Drive Force Impeller Puller for Impellers over 65mm - 114mm Diameter The Drive Force impeller puller is an impeller removal tool designed to help remove impellers with over 65mm - 114mm diameters from the pump without damaging the fragile pump body. Traditional tools such as screwdrivers should not be used as these can easily damage the body of the pump which may lead to pump failure. By removing the end cover screws, it is possible to remove the impeller by using an impeller removal tool even in confined spaces. Remember it is important to always carry spare impellers on board in case of an emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. New impellers should always be greased before installation as it makes it easy to install the impeller into the pump bore and secondly it gives added protection to the impeller during initial prim..

(4)

170.73€ 169.02€ Ex Tax: 169.02€

Johnson Neoprene Pump Impeller for Johnson F8 Pump Models (11 Blade)

Johnson Neoprene Pump Impeller for Johnson F8 Pump Models (11 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F8 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has eleven blades and is supplied complete with spline plug, lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-819B flexible neoprene impeller replaces the following impellers... - Caterpillar impellers: 5N9360 - Cummins impellers: NH250M, NT855M, V504M, V555MSC, VT555MSC, VT55MBC & VT555MBC - Detroit: 8924838 - Globe impeller: 125 - Jabsco impeller: 836-0001 & 17935-0001 - Johnson impellers: 09-1029B - Onan impell..

(15)

170.17€ 168.47€ Ex Tax: 168.47€

Impeller for JABSCO 17936-01

Impeller for JABSCO 17936-01Impellers starting with code: 18140... 18150... 18160... are made of Neoprene for fresh and salt water (engine cooling and water systems pumps). Impellers starting with code: 18141... 18151... 18161... are made of Nitrile for bilge, oils and derivatives. Turbine néoprène pour pompe série Ref.: JAB17936-0001B Désignation: Turbine néoprène pour pompe série Référence d'origine: 4L8470 Diamètre arbre: 1" (25,4 mm) Matière: Néoprène Modèle: 6-71TA - 6-71TI - 6V93 - 6V92TIA - 8V71 - 12V71 - 16V71 - D2530M/MT - D2540L/ML/MT - 500 Nombre de pales: 12 Type de moteur: Inboard Motoriste: Caterpillar, MAN Description: ..

(14)

157.18€ 155.60€ Ex Tax: 155.60€

Drive Force Impeller Puller for Impellers up to 65mm Diameter

Drive Force Impeller Puller for Impellers up to 65mm Diameter The Drive Force impeller puller is an impeller removal tool designed to help remove impellers with a diameter up to 65mm from the pump without damaging the fragile pump body. Traditional tools such as screwdrivers should not be used as these can easily damage the body of the pump which may lead to pump failure. By removing the end cover screws, it is possible to remove the impeller by using an impeller removal tool even in confined spaces. Remember it is important to always carry spare impellers on board in case of an emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. New impellers should always be greased before installation as it makes it easy to install the impeller into the pump bore and secondly it gives added protection to the impeller during initial prime. Most Johnso..

(12)

156.45€ 154.88€ Ex Tax: 154.88€

Impeller Johnson 09-0820b

Impeller Johnson 09-0820bSize Ø int.mm. 22.5 Ø 130 mm-thick 96.5 est.mm., nr. 12 blades ..

(5)

153.62€ Ex Tax: 153.62€

Jabsco 14609-0001 Neoprene Impeller (6 Blades)

Jabsco 14609-0001 Neoprene Impeller (6 Blades) The Jabsco 14609-0001 flexible neoprene impeller has 6 impeller blades, a single flat drive and replaces: Jabsco 1414-0001, 14609-0001 and 14787-0001. This impeller is suitable for Jabsco 9040-0511 pumps as fitted to Hawker Siddeley Marine AB 1W engines. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maint..

(3)

151.03€ 149.52€ Ex Tax: 149.52€

Jabsco SK33 Service Kit for Flexible Impeller Pumps

Jabsco SK33 Service Kit for Flexible Impeller Pumps This Jabsco SK33 service kit is suitable for Jabsco flexible impeller pumps. 21820-200, 21820-2001, 21820-205, 3270-0000, 3270-20, 3270-2301, 3270-2401, 3270-251, 3270-261, 3270-205, 3270-1951, 3280-200, 3370-200, 3370-221, 3370-201, 3370-241, 3370-251, 3370-271, 3380-200, 3380-221, 5850-0001 and 9380. 1x Impeller - 1210-0001 1x Shaft Seal - SP2701-21B 1x O-Ring - SP2000-21B 1x Gasket - 3298-0000 6x End Cover Screws - 91002-0020 Specifications Brand Jabsco Contents 1 x Impeller, 1 x Seal, 1 x O-Ring, 1 x Gasket & 6 x End Cover Screws Model SK33 Suitability ..

(6)

146.04€ 144.58€ Ex Tax: 144.58€

Jabsco SK384-0101 Service Kit for Flexible Impeller Pumps

Jabsco SK384-0101 Service Kit for Flexible Impeller Pumps 29540-1001, 52040-2001, 52040-2003, 52040-2021, 52040-2401, 52051-2051. 1x Neoprene Impeller - 1210-0001B 1x Seal - SP2700-1027 1x Gasket - 3298 6x End Cover Screws - X3001-095F Specifications Brand Jabsco Contents Neoprene Impeller, Seal, Gasket & End Cover Screws Model SK384-0101 Suitability See Description ..

(6)

143.04€ 141.60€ Ex Tax: 141.60€

Jabsco 14281-0003B Nitrile Impeller with 12 Blades (Double Flat Drive)

Jabsco 14281-0003B Nitrile Impeller with 12 Blades (Double Flat Drive) The Jabsco 14281-0003B flexible nitrile impeller has 12 impeller blades and a twin flat drive. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. This impeller is suitable for use with Jabsco pumps 17430-7000, 30510-7000, 53040-2003 and 53040-2..

(13)

143.01€ 141.58€ Ex Tax: 141.58€

Jabsco 17018-1101 Neoprene Impeller

Jabsco 17018-1101 Neoprene Impeller Jabsco 17018-1101 Neoprene Impeller replaces the following: Volvo impellers: VP3817587 & 3583602 Caterpillar impeller: 3N5895 This Jabsco Impeller fits the following Pumps: 17350-0011, 21810, 21890, 23340-1001, 23340-1101, 29700-1101, 29700-1201, 29700-1301, 29700-1331, 29700-1401, 50350-1001, 50390-1201, 50430-0301. The Jabsco 17018-1101 flexible neoprene impeller has 8 impeller blades, and a splined drive. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation..

(10)

133.27€ 131.93€ Ex Tax: 131.93€

Sherwood impeller 29000k

Sherwood impeller 29000kSize Ø int.mm. 23.8 Ø 102 mm thick est.mm. 95, nr. 12 blades ..

(14)

131.84€ Ex Tax: 131.84€

Jabsco 14281-0001B Neoprene Impeller

Jabsco 14281-0001B Neoprene Impeller The Jabsco 14281-0001B flexible neoprene impeller has 12 impeller blades and a double flat drive, suitable for 28240 and 28260 series of pumps. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. This Impeller has a K profile. Specifications Brand ..

(9)

128.05€ 126.77€ Ex Tax: 126.77€

Impeller 09-802b for Johnson Pump F9

Impeller 09-802b for Johnson Pump F9SPX FLOW Johnson Pump original impellers. ..

(4)

119.39€ Ex Tax: 119.39€

Jabsco Flexible Neoprene Pump Impeller (8 Blades)

Jabsco Flexible Neoprene Pump Impeller (8 Blades) The Jabsco 11979-0001B flexible neoprene impeller has 8 impeller blades and is supplied as an impeller kit, with seal and O-ring. This impeller kit is suitable for the following Jabsco engine cooling pumps: 10170-0011, 17200-0001, 17380-0001, 17380-0011, 17380-0021, 17380-0031, 18930-0000, 18930-0010, 18930-0020 and 18940-0010. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always adv..

(14)

119.73€ 118.53€ Ex Tax: 118.53€

Sherwood impeller 18000k

Sherwood impeller 18000kSize Ø int.mm. 20.7 Ø 94.5 101.5 mm thick est.mm., nr. 12 blades ..

(8)

116.08€ Ex Tax: 116.08€

Johnson Neoprene Impeller for Johnson F7B (8 Blade)

Johnson Neoprene Impeller for Johnson F7B (8 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller has eight blades and is supplied complete with gaskets, O-ring, lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson flexible pump impeller is designed to be installed to some of the F7 range of Johnson Pumps, including the following: Pump Suitability for the Johnson 09-1028B Impeller: - Johnson F7B-3 pumps (10-22045-1 & 10-22054-1) - Johnson F7B-3000, F7B-3020 & F7B-3030 pumps (10-24209-1, 10-24209-3 & 10-24209-5) - Johnson F7B-30007, F7B-30207 & F7B-30307 pumps (10-24209-7, 10-24209-9 & 10-24209-11) - Johnson F7B-5 pumps (10-22342-) - Johnson F7B-5000, F7B-5001, F7B-5001 MC & F7B..

(12)

117.06€ 115.89€ Ex Tax: 115.89€

Jabsco SK228 Service Kit for Jabsco 4760 & 5640 Impeller Pumps

Jabsco SK228 Service Kit for Jabsco 4760 & 5640 Impeller Pumps Jabsco SK228 pump service kit for Jabsco 4760, 4760-01, 4760-101, 4760-111, 4760-141, 4760-151, 4760-21, 4760-41, 4760-51, 4760-61, 4760-71, 4760-81, 4760-91 and 5640 pumps. End Cover Screws - SP1002-01 Gasket - 2995-0030 Impeller - 673-0001 Seal - SP2701-04 Specifications Brand Jabsco Contents See Description Model SK228 Suitability See Description ..

(3)

115.66€ 114.50€ Ex Tax: 114.50€

Impeller JABSCO 17935-01

Impeller JABSCO 17935-01Impellers starting with code: 18140... 18150... 18160... are made of Neoprene for fresh and salt water (engine cooling and water systems pumps). Impellers starting with code: 18141... 18151... 18161... are made of Nitrile for bilge, oils and derivatives. Turbine néoprène ø25mm axe à cannelure 12 pâles ø95mm Ref.: JAB17935-0001-P Désignation: Turbine néoprène ø25mm axe à cannelure 12 pâles ø95mm Diamètre arbre: 1" (25,4 mm) Matière: Néoprène Nombre de pales: 12 Description: ..

(14)

114.00€ Ex Tax: 114.00€

Sherwood impeller 26000k

Sherwood impeller 26000kSize Ø int.mm. 20 Ø 94.5 79.8 mm thick est.mm., nr. 12 blades ..

(6)

109.76€ Ex Tax: 109.76€

Jabsco Neoprene Key Drive Pump Impeller (8 Blades, 65mm OD, 51mm Wide)

Jabsco Neoprene Key Drive Pump Impeller (8 Blades, 65mm OD, 51mm Wide) The Jabsco 4598-0001 flexible neoprene impeller has 8 impeller blades and a key drive, suitable for JD 3/4"-200, JD 3/4"-201, JD 3/4"-205, JD 3/4"-208, 14620, 4590-0001 & 4620-0001 pumps. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. The Jabsco 4598-0001 flexible neoprene..

(8)

109.00€ 107.91€ Ex Tax: 107.91€

Johnson MC97 Pump Impeller for Johnson F6 Pump Models (12 Blade)

Johnson MC97 Pump Impeller for Johnson F6 Pump Models (12 Blade) The genuine Johnson MC97 flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F6 range of Johnson Pumps which suits the impeller dimensions listed in the Overview. MC97 has been developed to meet new environmental regulations for rubber manufacturing processes and will replace the regular Johnson neoprene impeller compound. The development of MC97 has also resulted in an extended service life of the impeller compared to impellers in neoprene. The Johnson flexible pump impeller has twelve blades and is supplied complete with gaskets, O-ring lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-812B-1 can be used ..

(6)

108.00€ 106.92€ Ex Tax: 106.92€

Jabsco Neoprene Pump Impeller (10 Blades, Through Pin Drive, 51mm OD)

Jabsco Neoprene Pump Impeller (10 Blades, Through Pin Drive, 51mm OD) This Jabsco Impeller is for the following Pumps: Jabsco 2620-0001, 2620-0051, 2620-1001 and 9900-0001. The Jabsco 18673-0001 Flexible Neoprene Impeller replaces the following Impellers: - Jabsco impellers: 18673-0001 & 673-0001 - Johnson impeller: 1026B - Perkins impeller: 24880194 - Volvo impellers: 875808, 897055 & 804696 The Jabsco 18673-0001 flexible neoprene impeller has 10 impeller blades, a splined drive and is supplied as an impeller kit, with fixing screw, gasket and O-ring. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You shou..

(14)

103.67€ 102.64€ Ex Tax: 102.64€

Jabsco 17935-0001 Neoprene Impeller

Jabsco 17935-0001 Neoprene Impeller This Jabsco Impeller fits the following Pumps: 3570, 10770-0111, 10880-0051, 10880-0151, 10880-2461, 10880-2561, 10880-2611, 10880-2661, 10980-0051, 12600-0001, 12600-0011, 12600-0021, 14300-0001, 14440-0001, 17520-0001, 17520-0002, 17520-0051, 17520-0052, 17810-1000, 21680-05, 2570-0001, 2570-0011, 2570-0011, 2570-0021, 2570-0051, 2570-0151, 2570-0211, 2570-3000, 29770-0001, 3110-0001, 3110-0011, 3240-0011, 3240-1001, 3570-0001, 50200-2011, 50200-2111, 50200-2211, 50200-2311, 50220-0011, 50220-0111, 50220-0211, 50220-0311, 50230-0311, 51200-2011, 51220-0011, 52200-2001, 52200-2011, 52200-2041, 52200-2051, 52220-0011, 52220-0041, 52220-0051, 52230-0001, 6400-0001, 6400-0004, 6400-0051, 6400-1051, 6590-0001, 6590-0004, 7420-0001, 7420-0004, 7420-0004, 7420-0101, 7420-0101, 7420-1001, 8150-0211 & 8950-0001. The Jabsco 17935-0001 Flexible Neoprene Impeller replaces the followin..

(12)

103.67€ 102.64€ Ex Tax: 102.64€

Impeller Johnson 09-838s

Impeller Johnson 09-838sDim. Ø int.mm. 25.40 Ø ext.mm.94 thickness mm.63, nr.11 blades ..

(7)

98.87€ Ex Tax: 98.87€

Jabsco Neoprene Spline Drive Pump Impeller (9 Blade, OD 95mm, W 63mm)

Jabsco Neoprene Spline Drive Pump Impeller (9 Blade, OD 95mm, W 63mm) This Jabsco Impeller is suitable for the following Pumps: 10630, 10630-01, 10630-07, 10630-200, 10630-207, 10630-57, 10650, 10650-200, 10670, 10670-01, 10670-10, 10670-11, 10670-200, 10670-201, 10670-210, 10670-211, 10770-0051, 10770-0151, 10770-0331, 10770-0351, 10770-0531, 10770-0551, 10770-07, 10770-57, 10770-62, 10880-0101, 10880-07, 10880-21, 10880-62, 10980-01, 11740-200, 11740-205, 11790, 11790-01, 21090-204, 21180, 21180-05, 21780, 21810-01, 21880-200, 21880-205, 29750-1001, 21980, 4360, 4800-101, 4800-111, 4800-161, 4800-171, 4800-21, 4800-21-01, 4800-41, 4800-51, 4800-53, 4800-54, 4800-71, 50570-0001, 50590-0001, 6400-200, 6400-205, 6400-207, 6590-200, 7870-200, 7870-201, 7870-221, 7870-231, 7870-251, 823-200, 823-205. The Jabsco 836-0001-P flexible neoprene impeller has 9 impeller blades, a spline drive and is supplied as an impel..

(8)

99.00€ 98.01€ Ex Tax: 98.01€

Jabsco Flexible Nitrile Pump Impeller (Spline Drive / 9 Blades)

Jabsco Flexible Nitrile Pump Impeller (Spline Drive / 9 Blades) This Jabsco Impeller is for the following Pumps: 11870-0001, 11870-0003, 11870-0004, 11870-0005, 11870-0006, 11870-0007, 50200-2003, 50200-2103, 50200-2203, 50200-2303, 50200-2903, 50200-9203, 50200-9303, 50200-9403, 50220-0903, 51200-2003, 51200-9013, 52200-2003, 6590-0003, 6590-0005 & 6590-237 The Jabsco 836-0003 Flexible Nitrile Impeller replaces the following Impellers: - Ancor impeller: J050405 - CEF impeller: 500205 - GLM impeller: 89560 - Jabsco impellers: 17935-0003 - Johnson impellers: 09-1029B-9 & 09-814B-9 - Oberdorfer impeller: 7054 - Sierra impeller: 18-3078 - Volvo impellers: 875660-3 & 875736-1 The Jabsco 836-0003 flexible nitrile impeller has 9 impeller blades and a spline drive. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impeller..

(12)

99.00€ 98.01€ Ex Tax: 98.01€

Johnson Neoprene Pump Impeller for Johnson F5 Pump Models (12 Blade)

Johnson Neoprene Pump Impeller for Johnson F5 Pump Models (12 Blade) The genuine Johnson neoprene flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F5 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has twelve blades and is supplied complete with gaskets, lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-801B can be used to replace the Jabsco 4568-0001 Europe and USA flexible impeller. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump..

(9)

98.58€ 97.59€ Ex Tax: 97.59€

Johnson Nitrile Pump Impeller 09-1027B for Johnson F5 Pumps (12 Blade)

Johnson Nitrile Pump Impeller 09-1027B for Johnson F5 Pumps (12 Blade) The genuine Johnson nitrile flexible impeller is suitable for applications where diesel or light oils are present. The Johnson flexible pump impeller is designed to be installed to some of the F5 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has twelve blades and is supplied complete with lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-1027B-9 can be used to replace the Jabsco 1210-0003 Europe and USA flexible impeller. For water-pumping applications, use Johnson MC97 impeller 09-1027B-1. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johns..

(4)

97.05€ 96.08€ Ex Tax: 96.08€

Impeller JABSCO 18948-01

Impeller JABSCO 18948-01Impellers starting with code: 18140... 18150... 18160... are made of Neoprene for fresh and salt water (engine cooling and water systems pumps). Impellers starting with code: 18141... 18151... 18161... are made of Nitrile for bilge, oils and derivatives. ..

(5)

102.16€ 93.17€ Ex Tax: 93.17€

Neoprene Impeller Jabsco 17240-0001

Neoprene Impeller Jabsco 17240-0001 This Jabsco Flexible Neoprene Impeller is for the following Pumps: Jabsco 29860-2001, 29860-2101, 29880-0001, 29880-0101, 29890-0001, 29880-0201, 29860-2201, 29870-2001 and 29870-2101. The Jabsco 17240-0001 flexible neoprene impeller has 9 impeller blades and a splined drive. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than correct..

(13)

92.00€ 91.08€ Ex Tax: 91.08€

Jabsco Flexible Nitrile Pump Impeller (Pin Drive / 10 Blades)

Jabsco Flexible Nitrile Pump Impeller (Pin Drive / 10 Blades) The Jabsco 18673-0003 flexible nitrile impeller has 10 impeller blades and a slotted shaft pin drive or through hole pin drive suitable for the following pumps: 2620-0003, 2620-0053, 2620-1003. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. This Impel..

(4)

90.00€ 89.10€ Ex Tax: 89.10€

Jabsco Neoprene Pump Impeller (6 Blades, Single Flat Drive, 51mm OD)

Jabsco Neoprene Pump Impeller (6 Blades, Single Flat Drive, 51mm OD) This Jabsco Impeller is suitable for the following Pumps: 12560-0001, 12570-0001, 12580-0001, 18660-0121, 6360-0001, 6360-1001, 6370-0001, 6370-1001, 6380-0001, 6380-1001. The Jabsco 6303-0001-P flexible neoprene impeller has 6 impeller blades, a single flat drive and is supplied as an impeller kit, with gasket, 3 O-rings and lubricant. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for sev..

(9)

88.81€ 87.92€ Ex Tax: 87.92€

Johnson Nitrile Pump Impeller for Johnson F3 Pump Models (6 Blade)

Johnson Nitrile Pump Impeller for Johnson F3 Pump Models (6 Blade) The genuine Johnson nitrile flexible impeller is suitable for applications where diesel or light oils are present. The Johnson flexible pump impeller is designed to be installed to some of the F3 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has six blades and is supplied complete with gaskets, O-ring, lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pump type. Johnson Pump impellers are manufactured in strict compliance with the pump specifications set by the engine manufacturers. Specificat..

(3)

87.08€ 86.21€ Ex Tax: 86.21€

Johnson MC97 Pump Impeller 09-810B for Johnson F4 Pumps (6 Blade)

Johnson MC97 Pump Impeller 09-810B for Johnson F4 Pumps (6 Blade) The genuine Johnson MC97 flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to some of the F4 range of Johnson Pumps which suits the impeller dimensions listed below. MC97 has been developed to meet new environmental regulations for rubber manufacturing processes and will replace the regular Johnson neoprene impeller compound. The development of MC97 has also resulted in an extended service life of the impeller compared to impellers in neoprene. The Johnson pump flexible impeller has six blades and is supplied complete with standard gaskets, O-ring, lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-810B-1 can be used to r..

(7)

85.50€ 84.65€ Ex Tax: 84.65€

Johnson MC97 Pump Impeller 09-1026B for Johnson F4/F5 Pumps (6 Blade)

Johnson MC97 Pump Impeller 09-1026B for Johnson F4/F5 Pumps (6 Blade) The genuine Johnson MC97 flexible impeller is suitable for general water-pumping duties such as engine cooling, water transfer, wash down and bilge water pumping purposes. The Johnson flexible pump impeller is designed to be installed to the following Johnson F4 and F5 range of pumps. Johnson Pump Impeller Suitability: Johnson F4B, F4B-4, F4B-9, F4B-903, F4B/6-M and F5B series pumps, including the following Johnson pump models: 10-22055-1, 10-22160-1, 10-24018-1, 10-24018-2, 10-24047-1, 10-24097-1, 10-24097-2, 10-24124-1, 10-24124-2, 10-24124-3, 10-24124-4, 10-24124-5, 10-24124-6, 10-24167-1, 10-24167-2, 10-24463-01, 10-24465-01, 10-24751-01, 10-24752-01, 10-31917-1, 10-32588-1, 10-35024-1, 10-35058-1, 10-35064-1, 10-35087-1, 10-35094-1, 10-35098-1, 10-35098-2, 10-35098-3 and 10-35098-4. The Johnson 09-1026B-1 can be used to replace the Jab..

(10)

85.50€ 84.65€ Ex Tax: 84.65€

Jabsco 18777-0001-P Neoprene Impeller Kit

Jabsco 18777-0001-P Neoprene Impeller Kit The Jabsco 18777-0001-P flexible neoprene impeller has 10 impeller blades, a splined drive and is supplied as an impeller kit, with gasket, spline sealing plug and lubricant. The Jabsco neoprene flexible impellers are used for pumping fresh or salt water, neoprene impellers are the most commonly used material and is suitable for use where only small amounts of oil or diesel fuel are present. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. The Jabsco 18777-0001-P flexible neoprene impeller replaces Jabsco impellers: ..

(15)

85.00€ 84.15€ Ex Tax: 84.15€

Impeller extractor over 1 inch

Impeller extractor over 1 inchImpeller extractor. ..

(6)

90.91€ 82.91€ Ex Tax: 82.91€

Impeller JOHNSON 09-804B-9

Impeller JOHNSON 09-804B-9Johnson replacement impellers. ..

(5)

88.48€ 80.69€ Ex Tax: 80.69€

Impeller for Pump Johnson F75

Impeller for Pump Johnson F75SPX FLOW Johnson Pump original impellers. ..

(4)

86.15€ 78.57€ Ex Tax: 78.57€

Jabsco Nitrile Flat Drive Pump Impeller with 6 Blades

Jabsco Nitrile Flat Drive Pump Impeller with 6 Blades The Jabsco 7273-0003 flexible nitrile impeller has 6 impeller blades and a single flat drive. The Jabsco 7273-0003 flexible nitrile impeller replaces the Jabsco 6303-0003 and 7273-0003 impellers. The impeller fits Jabsco Water Puppy bilge pumps and Jabsco pumps 12520-0003, 12520-1003, 12520-0273 and 12520-1273. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but ..

(9)

79.00€ 78.21€ Ex Tax: 78.21€

Jabsco Flexible Nitrile Pump Impeller (Pin Drive / 6 Blades)

Jabsco Flexible Nitrile Pump Impeller (Pin Drive / 6 Blades) The Jabsco 4528-0003 flexible nitrile impeller has 6 impeller blades and a slotted shaft pin drive or through hole pin drive. The Jabsco nitrile flexible pump impeller is suitable for pumping fuel or water heavily contaminated with oil or diesel. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. You should replace your flexible pump impellers at least once every year or sooner depending on use. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative rather than corrective maintenance. The Jabsco 4528-0003 Nitrile Flexible Impeller replaces the following popular O..

(4)

79.00€ 78.21€ Ex Tax: 78.21€

Johnson Nitrile Pump Impeller for Johnson F7 Pump Models (8 Blade)

Johnson Nitrile Pump Impeller for Johnson F7 Pump Models (8 Blade) The genuine Johnson nitrile flexible impeller is suitable for applications where diesel or light oils are present. The Johnson flexible pump impeller is designed to be installed to some of the F7 range of Johnson Pumps which suits the impeller dimensions listed below. The Johnson flexible pump impeller has twelve blades and is supplied complete with lubrication gel and instruction manual to aid installation of the impeller into the flexible impeller pump. The Johnson 09-1028B-9 can be used to replace the Jabsco 17937-0003 and 920-0003 Europe and USA flexible impellers. For water-pumping applications, use Johnson neoprene impeller 09-1028B. It is highly recommended to make sure you use an original pump impeller for your flexible impeller pump as this will ensure that the quality complies with the performance and dimension requirements for each pum..

(13)

77.00€ 76.23€ Ex Tax: 76.23€

Neoprene Impeller for Water Pump Johnson F8

Neoprene Impeller for Water Pump Johnson F8Johnson replacement impellers. ..

(6)

82.91€ 75.61€ Ex Tax: 75.61€

Jabsco Flexible Neoprene Pump Impeller (Spline Drive / 12 Blades)

Jabsco Flexible Neoprene Pump Impeller (Spline Drive / 12 Blades) This Jabsco Impeller is for the following Pumps: Jabsco 9380, 10970, 21690, 29500, 10170-0011, 10550-01, 10550-200, 10550-205, 10550-2701, 10950-200, 10950-201, 10950-204, 10950-205, 10950-2101, 10950-2141, 10950-2201, 10950-2241, 10950-2401, 10950-2441, 10950-2451, 10950-2601, 10950-2701, 10970-21, 11410-200, 11470-200, 11570-200, 11590-204, 11850-0101, 11850-0701, 11850-0701, 11850-0711, 14210-0001, 14320-0001, 1673-0001, 1673-1001, 1673-2001, 18400-0050, 18830-0000, 18830-0010, 18840-0010, 21080-200, 21080-204, 21090-200, 21190-200, 21690-05, 21690-200, 21820-200, 21820-2001, 21820-205, 29500-1001, 29500-1101, 29500-1201, 29500-1251, 29500-1351, 29500-1401, 29500-1451, 29500-1501, 29500-1901, 29500-3001, 29520-2001, 29530-2001, 29540-1001, 29540-1101, 29540-1201, 29540-1301, 30410-9001, 3270-0000, 3270-0001, 3270-1951, 3270-20, 3270-200, 3270-20..

(7)

75.00€ 74.25€ Ex Tax: 74.25€

Nitrile Spare Impeller for Pump Johnson F8

Nitrile Spare Impeller for Pump Johnson F8Johnson replacement impellers. ..

(12)

80.75€ 73.64€ Ex Tax: 73.64€