Marine Parts Cummins

Marine Parts Cummins

Marine Parts Cummins

Show:
Sort By:

Sherwood P1722C Engine Cooling Pump

Sherwood P1722C Engine Cooling Pump This is a genuine Sherwood P1722C flange mounted boat engine cooling pump, using raw water intake (river water or sea water) to cool the engine. The Sherwood P1722C is supplied with a 12 vane threaded and through key drive flexible neoprene impeller. The Sherwood P1722C flexible impeller engine cooling pump replaces the Sherwood pumps P1722-04, P1722A, P1722B, P1722B-01, P1722B-02, P1722X and P173. Typical applications for the Sherwood P1722C pump include: Cummins C series engines and Cummins 6C engines up to 450HP engines, replaces Cummins pumps 3912139, 3922589 and 3964989. The raw water engine cooling pump is the heart of the marine engine, supplying a continuous flow of raw water to maintain temperatures consistent with the demanding engine performance.Sherwood raw water pumps have a reputation of excellence in quality; and are chosen for their performance and dependab..

(15)

2,600.00€ 2,574.00€ Ex Tax: 2,574.00€

Bowman CM600-5020 (Cummins 6B)

Bowman CM600-5020 (Cummins 6B) This Bowman heat exchanger manifold assembly is suitable for direct fitting to Cummins 6B, 6BT and 6BTA engines. The Bowman CM600-5020 Cummins exhaust manifold is made from marine grade aluminium, and will fit most of the Cummins 6B engines. Order gaskets, hoses and exhaust outlet as extras. Specifications Brand Bowman Country of Origin United Kingdom Manifolds and Manicoolers Heat Exchanger Manifolds / Manicoolers Construction Marine Grade Aluminium Model CM60..

(14)

1,900.00€ 1,881.00€ Ex Tax: 1,881.00€

Bowman GL140-4076-2

Bowman GL140-4076-2 Bowman intercoolers / charge air heat exchangers are suitable for cooling both marine engines and land based engines, including: gensets, fire pumps and co-generation equipment. Charge air coolers are also suitable for use in engine testing and development programs. This Bowman GL140 three pass intercooler is designed to give increased fuel efficiency and engine power when used in conjunction with a turbo charger. Please Note: the figures listed above are based on Air temperature from 180°C to 50°C at 1.75 Bar G and using water temperature at 20°C. Heat rejection: 40 kW Specifications Flow Rate Charge Air Flow: 15.4kg per minute, Water flow: 215 LPM Height 220mm Length ..

(6)

1,800.00€ 1,782.00€ Ex Tax: 1,782.00€

Bowman FG100

Bowman FG100 Bowman intercoolers / charge air heat exchangers are suitable for cooling both marine engines and land based engines, including: gensets, fire pumps and co-generation equipment. Charge air coolers are also suitable for use in engine testing and development programs. This Bowman FG100 three pass intercooler is designed to give increased fuel efficiency and engine power when used in conjunction with a turbo charger. Please Note: the figures listed above are based on Air temperature from 180°C to 50°C at 1.75 Bar G and using water temperature at 20°C. Heat rejection: 25.4 kW Specifications Flow Rate Charge Air Flow: 9.8kg per minute, Water flow: 140 LPM Height 180mm (7") Length ..

(15)

999.00€ 989.01€ Ex Tax: 989.01€

R&D Flexible Engine Mount for Cummins Engines (80-235LBS)

R&D Flexible Engine Mount for Cummins Engines (80-235LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(10)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount for Cummins Engines (300-685LBS)

R&D Flexible Engine Mount for Cummins Engines (300-685LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(13)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount for Cummins Engines (250-565LBS)

R&D Flexible Engine Mount for Cummins Engines (250-565LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(9)

145.04€ 143.59€ Ex Tax: 143.59€

R&D Flexible Engine Mount for Cummins Engines (120-415LBS)

R&D Flexible Engine Mount for Cummins Engines (120-415LBS) The R&D flexible engine mount is designed to be a direct fit for Cummins marine engines. The flexible engine mount has added features of being fail-safe, working within controlled limits and able to withstand a roll-over test. The mount is soft vertically and at right angles to the crankshaft to isolate vibrations, as well as being able to cope with propeller thrust. It is fitted with an oil shield which is designed to protect the rubber. Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. Specifications Height 138mm (5.45"), Base: 63.5mm (2.5") Length Base: 127mm (5") ..

(15)

145.04€ 143.59€ Ex Tax: 143.59€

Engine Anode Cummins with Brass cap (16x50mm)

Engine Anode Cummins with Brass cap (16x50mm)Cummins engine (16x50mm) pencil anodes...

(6)

49.70€ 45.23€ Ex Tax: 45.23€

Drive Force Zinc Pencil Engine Anode for Cummins (3/8" UNC Thread)

Drive Force Zinc Pencil Engine Anode for Cummins (3/8" UNC Thread) Marine engine anode made from zinc. This anode is suitable for Cummins engines. The anode will corrode through electrolytic corrosion and prevent the internal components from being affected. Specifications Length Overall: 45mm (1.8"), Thread: 13mm (1/2") Construction Zinc Style Description Pencil Anode Suitability Cummins engines Thread Size 3/8" UNC Male ..

(7)

38.66€ 38.28€ Ex Tax: 38.28€

Replacement Marine Engine Spin-On Oil Filter Element (Cummins 6B)

Replacement Marine Engine Spin-On Oil Filter Element (Cummins 6B) A quality oil filter is an essential part of your equipment to help protect sensitive engine parts, especially in very high-performance engines. The Mann oil filter helps provide maximum filtration with embossed papers and have excellent corrosion resistance even with high engine oil pressure. The marine engine oil filter is suitable for Cummins 6B engines, including: 6-590, 6B-5.9, 6BT-5.9, 6BTA-5.9, 6T-590, 6TA-590, QSB 5.9, 6BT5.9-G1 and 6BT5.9-G2. Cummins Gensets: C 100 D5P - 6 BTA 5.9 G5, C 125 D5P - 6BTAA 5.9 G3, C 140 D5P - 6BTAA 5.9-G4 and C 75/ 82.5 D5P - 6 BT 5.9 G1. Cummins Construction Engines: QSB 5.9 TAA Tier 2 and QSB 5.9T Tier 2 This Mann W 950/18 oil filter element will replace the following elements: The oil filter element will also replace elements: Agco 72516594, 72516556, 72501532, Ammann 1-947559, 4-9501000017, 1-9..

(5)

34.99€ 34.64€ Ex Tax: 34.64€

Drive Force Spin On Fuel Filter Element For Cummins B & Volvo Engines

Drive Force Spin On Fuel Filter Element For Cummins B & Volvo Engines Marine fuel filter element for Cummins B Volvo and DIV engines, including the following engines and gensets: - Cummins 4-390, 4B-3.9, 4BT-3.9 and 4BTA-3.9 Engines - Cummins 6-590, 6B-5.9, 6BT-5.9, 6BTA-5.9, 6T-590, 6TA-590, 6BT5.9-G1, 6BT5.9-G2, 6BTA5.9-G1, 6BTA5.9-G2, 6BTA5.9-G3 and 6BTA5.9-G4 Engines - Cummins C 100 D5P - 6 BTA 5.9 G5, C 125 D5P - 6BTAA 5.9 G3, C 140 D5P - 6BTAA 5.9-G4, C 180 D5P - 6 CTA 8.3 G2-1, C 200 D5P - 6 CTAA 8.3 G1-1 and C 75/ 82.5 D5P - 6 BT 5.9 G1 - Cummins B3.9C, B5.9C, C8.3C and C8.3C Engines used in Volvo EC 140, EC 210, EC 240 and EC 290 Crawler Excavators This fuel filter element will replace the following elements: - Cummins 3931063 and 3903640 - Volvo 142139393 and 142440437 - Caterpillar 3I1221, 9Y-4516 and 9Y-4421 - Fiaam FP 4683 - Fram P-4102 - Hengst H60WK - Mahle KC6 - Mann WK 731 - Purflux CS162 - Tec..

(15)

17.71€ 17.53€ Ex Tax: 17.53€

Zink Anode for Cummins Engine 18 x 65mm

Zink Anode for Cummins Engine 18 x 65mmCummins engine (18x65mm) pencil anodes..

(12)

14.65€ 13.33€ Ex Tax: 13.33€