Spare parts for Morse Systems

Spare parts for Morse Systems

Spare parts for Morse Systems

Show:
Sort By:

Dual Station Morse for cable 33c

Dual Station Morse for cable 33c A dual station unit allows the boats operator to control the engine from two different helm positions. This unit uses the Morse change over system to allow two control levers to operate the same engine. A selector is used to decide which lever operates the engine at any time, and can be changed when both levers are set to neutral. This eliminates accidental or unauthorised use from the station that is not in use. This is the dual station unit for the engine operation. The engine dual station unit is connected to each station with 330 (33C) cables, and then one cable goes to the engine. Brand Morse ..

(12)

494.23€ 489.29€ Ex Tax: 489.29€

DriveForce Lost Motion Dual Station Engine Kit (330 Cable)

DriveForce Lost Motion Dual Station Engine Kit (330 Cable) Dual station connection kit with brackets and slotted connection ends. Works with both push or pull throttle applications. Accepts two standard 33c type cables. Brand DriveForce System Lost Motion ..

(3)

274.24€ 271.50€ Ex Tax: 271.50€

Conversion Kit for Morse MT3 (For 43C Cables)

Conversion Kit for Morse MT3 (For 43C Cables) This Morse Controls conversion kit is suitable for fitting Morse 43C cables to the single Morse MT3 control head. Specifications Brand Morse Spares and Accessories Conversion Kit ..

(11)

257.51€ 254.93€ Ex Tax: 254.93€

Morse Dual Station Control Lever Selector Unit

Morse Dual Station Control Lever Selector Unit Morse dual station selector kit to choose which control lever is in operation. The selector is used with the Morse change over system for dual station controls. This system requires one dual station gearbox unit and one dual station engine unit as well as 7 lengths of 330 (33C) cable. One of these cables is used to join the selector kit to the gearbox control unit. Brand Morse System Morse Change Over ..

(6)

244.86€ 242.41€ Ex Tax: 242.41€

Morse Kit to Convert 33C Cable to Stop Cable

Morse Kit to Convert 33C Cable to Stop Cable The Morse DC kit fits to the end of a 330/33C type cables to convert it to a push / pull stop cable. Supplied with a T handle to be mounted through a bulkhead or panel to operate the stop cable. Using the 330 cable as a stop cable allows for greater load applications due to the heavy duty nature of the cable compared to normal stop cables. The kit also includes a thumbscrew nut, which can be used to increase the friction on the cable, particularly useful for variable hydraulic pump applications. Features a built in damper facility so the cable can be locked in the on or off position. Brand Morse ..

(14)

184.75€ 182.90€ Ex Tax: 182.90€

Kit K14F Ultraflex for Yamaha

Kit K14F Ultraflex for YamahaKit K14F for cables C2-C8-MachZero-33C on engines Yamaha 9,9 D/FT9,9D / F15A ..

(4)

168.00€ 166.32€ Ex Tax: 166.32€

Kit Ultraflex 14B

Kit Ultraflex 14BKIT K14B for cables C2-C8-MachZero-33C on engines Yamaha 9,9 D / 15 D ..

(15)

158.44€ 156.70€ Ex Tax: 156.70€

Fitting Kit for Morse MT3 Single Control Head

Fitting Kit for Morse MT3 Single Control Head This fitting kit is suitable for the fitting of a Morse MT3 single control head. The Morse MT3 fitting kit contains the throttle eye terminal C clip (607201-4), which is no longer available individually. Specifications Brand Morse Replaces 607201-4 Morse MT3 Throttle Eye Terminal C Clip Spares and Accessories Fitting Kit ..

(9)

113.52€ 112.38€ Ex Tax: 112.38€

Bracket Ultraflex S56

Bracket Ultraflex S56S56 Bracket plate for control B89, B90. ..

(6)

108.98€ 107.89€ Ex Tax: 107.89€

Kit Double Station Ultraflex L23 (Ultraflex)

Kit Double Station Ultraflex L23 (Ultraflex)Dual station selector with single lever controls. Advisable with dual lever. The selector gives a smoother drive and lets using separately throttle and gear , from cabin or from flying bridge. Double station single lever controls selector...

(13)

95.00€ 94.05€ Ex Tax: 94.05€

Stop Cable Outer Clamp & Inner Pivot

Stop Cable Outer Clamp & Inner Pivot Stop cable outer clamp and inner pivot for stop cable. This pivot and pin fits a 6mm thick lever and 6.5mm diameter hole. Brand AG Spares and Accessories Pivot ..

(14)

91.98€ 91.06€ Ex Tax: 91.06€

Conversion Kit for Ultraflex B Series (For 43C Cables)

Conversion Kit for Ultraflex B Series (For 43C Cables) This Uflex K32 boat control conversion kit is suitable for fitting 43C cables to the range of Uflex B series boat control heads. Each conversion kit consists of 2 converters. The Uflex K32 SK28 cable adaption kit is only available at this Special Price whilst stocks last at ASAP Supplies. Specifications Brand Ultraflex Spares and Accessories Conversion Kit ..

(11)

88.86€ 87.97€ Ex Tax: 87.97€

Fitting Kit for Kobelt 2092 (For 43C Cables)

Fitting Kit for Kobelt 2092 (For 43C Cables) Kobelt cable connection kit suitable for fitting 43C cables to Kobelt 2092 control head. The control head requires one kit per each connection point. Brand Kobelt Spares and Accessories Fitting Kit ..

(6)

87.19€ 86.32€ Ex Tax: 86.32€

Fitting Kit for Kobelt 2046 (For 43C Cables)

Fitting Kit for Kobelt 2046 (For 43C Cables) Kobelt cable connection kit suitable for fitting 43C cables to Kobelt 2046 control head. The control head requires one kit per each connection point. Brand Kobelt Spares and Accessories Fitting Kit ..

(12)

87.19€ 86.32€ Ex Tax: 86.32€

Kit Ultraflex K24

Kit Ultraflex K24Kit K24 to fit cable C4 to controls B47/49 for O.M.C. and Volvo. ..

(15)

91.13€ 83.11€ Ex Tax: 83.11€

Ultraflex Kit to Connect 33C Cable to Johnson/Evinrude Engines

Ultraflex Kit to Connect 33C Cable to Johnson/Evinrude Engines Outboard connection kit for 33C (330 Series) control cables. This kit provides all the fittings required to connect the end of a 33C control cable to a Johnson or Evinrude engine. This connection kit allows Johnson and Evinrude outboard engines to be operated by a control head. Brand Uflex Spares and Accessories Connection Kit ..

(12)

81.36€ 80.55€ Ex Tax: 80.55€

Side Mounting Bracket for Converted 33C Push/Pull Stop Cable

Side Mounting Bracket for Converted 33C Push/Pull Stop Cable This bracket is designed especially to allow side mounting of the 607297 330 series stop cable conversion kit. Height: 110mm Width: 48mm Brand Morse Spares and Accessories Bracket ..

(15)

80.68€ 79.87€ Ex Tax: 79.87€

Morse 430/43C Control Cable End Pivot (6.4mm Thick)

Morse 430/43C Control Cable End Pivot (6.4mm Thick) Morse control end pivot. Brass pivot with 1/4" thread for 430/43C/40XL type cables. For max lever thickness 6.4mm. Sold singularly. Brand Morse Colour Brass Construction Brass ..

(10)

72.32€ 71.60€ Ex Tax: 71.60€

Morse Clevis End for 430/43C Cable (6.4mm Pin / 7.1mm Jaw)

Morse Clevis End for 430/43C Cable (6.4mm Pin / 7.1mm Jaw) The Morse clevis end is suitable for use with a 430 / 43C cable. The clevis end has a 6.4mm pin and a 7.1mm jaw. Brand Morse Spares and Accessories Clevis End ..

(15)

72.07€ 71.35€ Ex Tax: 71.35€

Fitting Kit for Kobelt 2047 (For 33C Cables / Throttle)

Fitting Kit for Kobelt 2047 (For 33C Cables / Throttle) Kobelt cable connection kit suitable for fitting 33C cables to the throttle lever of the Kobelt 2047 control head. The control head requires one kit per each connection point. Brand Kobelt Spares and Accessories Fitting Kit ..

(8)

69.34€ 68.64€ Ex Tax: 68.64€

Kit K40 for cable C2 Ultraflex (Ultraflex)

Kit K40 for cable C2 Ultraflex (Ultraflex)Kit K40 for cable C2 - MachZero to Selva ..

(11)

70.27€ 64.08€ Ex Tax: 64.08€

Fitting Kit for Kobelt 2004 (For 33C Cables)

Fitting Kit for Kobelt 2004 (For 33C Cables) The Kobelt 606511-33 cable connection kit is suitable for fitting 33C cables to the Kobelt 2004 control head. The control head requires one kit for each connection point. Brand Kobelt Spares and Accessories Fitting Kit ..

(10)

62.93€ 62.30€ Ex Tax: 62.30€

Fitting Kit for Kobelt 2092 (For 33C Cables)

Fitting Kit for Kobelt 2092 (For 33C Cables) The Kobelt cable connection kit is suitable for fitting 33C cables to the Kobelt 2092 control head. The control head requires one kit per each connection point. Brand Kobelt Spares and Accessories Fitting Kit ..

(10)

60.19€ 59.59€ Ex Tax: 59.59€

Fitting Kit for Kobelt 2046 (For 33C Cables)

Fitting Kit for Kobelt 2046 (For 33C Cables) The Kobelt cable connection kit is suitable for fitting 33C cables to the Kobelt 2046 control head. The control head requires one kit for each connection point. Brand Kobelt Spares and Accessories Fitting Kit ..

(3)

60.19€ 59.59€ Ex Tax: 59.59€

Kit Ultraflex K22

Kit Ultraflex K22Kit K22 to fit cable C22 to controls B58, B59, B204, B208, B203T, B203S. Connection kit for C22 cables on B58 / B59 controls...

(7)

60.16€ 59.56€ Ex Tax: 59.56€

Kit K8 for cable C2 Ultraflex (Mavi.mare)

Kit K8 for cable C2 Ultraflex (Mavi.mare)Kit K8 for cable C2, Mach Zero on engines Yamaha 20C, 20D, 20V, 25D, 30A and 30G. ..

(12)

63.45€ 58.57€ Ex Tax: 58.57€

Morse 430/43C Control Cable End Pivot (3.2mm Thick)

Morse 430/43C Control Cable End Pivot (3.2mm Thick) Morse control end pivot. Brass pivot with 1/4" thread for 430/43C/40XL type cables. For max lever thickness 3.2mm. Sold singularly. Brand Morse Colour Brass Construction Brass ..

(5)

56.59€ 56.03€ Ex Tax: 56.03€

stainless steel bracket for cable stop (Indemar)

stainless steel bracket for cable stop (Indemar)Stainless steel bracket for cable stop engine, throttle, fuel valves, etc. Dims. 110x48 mm. Protrusion 30 m. ..

(4)

55.01€ 50.77€ Ex Tax: 50.77€

Kit Ultraflex K61

Kit Ultraflex K61Connection kit for C22 cables on lever controls.K61: for controls B301 / B302 / B201K22: for controls B58 / B59 / B46 / B50 / B204 / B208 / B322 / B324 ..

(7)

49.22€ 45.43€ Ex Tax: 45.43€

Helix spire thru-bulkhead tube for flexible control cables D50x120CM White

Helix spire thru-bulkhead tube for flexible control cables D50x120CM Whitethru-bulkhead tubes and motorwell boots > white cap thru-bulkhead tube ..

(8)

44.79€ 41.34€ Ex Tax: 41.34€

Helix spire thru-bulkhead tube for flexible control cables D50x120CM Black

Helix spire thru-bulkhead tube for flexible control cables D50x120CM Blackthru-bulkhead tubes and motorwell boots > black cap thru-bulkhead tube ..

(8)

44.79€ 41.34€ Ex Tax: 41.34€

X41 Security Kit for Morse Ultraflex B400

X41 Security Kit for Morse Ultraflex B400Safety kit for B400 single lever control. Allows engine starting only with disengaged gear. ..

(15)

41.37€ 38.18€ Ex Tax: 38.18€

Safety switch Ultraflex X12

Safety switch Ultraflex X12X12 Neutral Safety switchPrevents starting in gear. Suitable for B89, B90, B59, B58, B65, B66,B73, B74, B76, B183, B184, B85, B77, B78, B79, B99, B101, B204,B208, B301, B302 Safety kit for single and twin lever controls. Allows engine starting only with disengaged gear...

(12)

34.34€ 34.00€ Ex Tax: 34.00€

Helix spire thru-bulkhead tube for flexible control cables D50x80CM White

Helix spire thru-bulkhead tube for flexible control cables D50x80CM Whitethru-bulkhead tubes and motorwell boots > white cap thru-bulkhead tube ..

(3)

35.70€ 32.95€ Ex Tax: 32.95€

Helix spire thru-bulkhead tube for flexible control cables D50x80CM Black

Helix spire thru-bulkhead tube for flexible control cables D50x80CM Blackthru-bulkhead tubes and motorwell boots > black cap thru-bulkhead tube ..

(14)

35.70€ 32.95€ Ex Tax: 32.95€

K60 kit for adapting C5 Ultraflex (Ultraflex)

K60 kit for adapting C5 Ultraflex (Ultraflex)Kit to fit Cable C5, C16 to control box B301 and B302 MACH5. ..

(5)

32.59€ 30.08€ Ex Tax: 30.08€

Kit K57 for cables C2 Ultraflex (Ultraflex)

Kit K57 for cables C2 Ultraflex (Ultraflex)Kit K57 for cables C2 - MachZero - C8 - 33C on engines OMC, Johnson, Evinrude Connection kit for C2 / MACHZero / C8 cables on Johnson/Evinrude engines...

(15)

30.30€ 30.00€ Ex Tax: 30.00€

Kit K56 for cables C2 Ultraflex (Ultraflex)

Kit K56 for cables C2 Ultraflex (Ultraflex)Kit K56 for cables C2 - MachZero - C8 - 33C on engines Mercury Connection kit for C2 / MACHZero / C8 cables on Mercury/Mercruiser engines...

(12)

30.30€ 30.00€ Ex Tax: 30.00€

Stop Cable End Fitting for Bracket Mounting

Stop Cable End Fitting for Bracket Mounting This stop cable end fitting connector kit allows the stop cable end to be bracket mounted. Brand AG Spares and Accessories Fitting Kit ..

(8)

24.66€ 24.41€ Ex Tax: 24.41€

Ball Joint Ultraflex L7 C2-Mach Zero-C7-C8-33C (Ultraflex)

Ball Joint Ultraflex L7 C2-Mach Zero-C7-C8-33C (Ultraflex)Stainless steel balljoint threaded 10.32 UNF.To be used on cables: C2-Mach Zero-C7-C8-33C End ball joint for C2 / MACHZero / C8 engine control cables...

(5)

24.24€ 24.00€ Ex Tax: 24.00€

Black Fast-mounting Rubber bellow (Nuova Rade)

Black Fast-mounting Rubber bellow (Nuova Rade)Rubber Cable steering bellow. Fast mounting. Can be changed without dismounting any mechanical part. ..

(7)

25.72€ 23.74€ Ex Tax: 23.74€

Kit K23 to fit cables C14 Ultraflex (Ultraflex)

Kit K23 to fit cables C14 Ultraflex (Ultraflex)Kit K23 to fit cables C14 and Mach14 to controls B47/49. Connection kit for C14 cables on B47 / B49 controls...

(6)

22.22€ 22.00€ Ex Tax: 22.00€

Kit K35 for C5 cable adaptation Ultraflex (Ultraflex)

Kit K35 for C5 cable adaptation Ultraflex (Ultraflex)Kit K35 to fit cables C5, C16 and Mach5 to single lever controls for Mercury and Mariner, except controls B301, B302, B103, B104. Connection kit for C5 / C16 / MACH5 cables on single lever controls, B301 / B302 / B103 / B104 excluded...

(5)

20.20€ 20.00€ Ex Tax: 20.00€

Ultraflex X43

Ultraflex X43X43 Safety switch for B103, B104. Safety kit for B103 / B104 controls. Allows engine starting only with disengaged gear...

(11)

19.19€ 19.00€ Ex Tax: 19.00€

throttle connection Ultraflex (Ultraflex)

throttle connection Ultraflex (Ultraflex)Lever control accessories ..

(6)

17.54€ 16.19€ Ex Tax: 16.19€

flexible protection hose tube mt.2 (Industrie Plastiche Lombarde)

flexible protection hose tube mt.2 (Industrie Plastiche Lombarde)Hose for inside canalization, wire passing, etc. ..

(12)

16.08€ 14.84€ Ex Tax: 14.84€

Connector Ultraflex for Morse Lever Handles

Connector Ultraflex for Morse Lever HandlesLever control accessories ..

(12)

14.14€ 14.00€ Ex Tax: 14.00€

Kit K51 connection to engine for cable C14 Ultraflex (Ultraflex)

Kit K51 connection to engine for cable C14 Ultraflex (Ultraflex)Kit K51 connection to engine for cable C14and Mach14 to be used on single lever B89 and B90. ..

(11)

14.86€ 13.71€ Ex Tax: 13.71€

Ultraflex L26

Ultraflex L26Clevis with inner thread, 1/ 4” x 28 UNF. To be used on cable C22. Connection clevis for C22 engine control cables...

(13)

12.02€ 11.90€ Ex Tax: 11.90€

Ultraflex L3

Ultraflex L3Control cable bracket to be used on cables : C2 - Mach Zero – C7– C8 – 33c. Clamp clevis for engine control cables...

(3)

11.11€ 11.00€ Ex Tax: 11.00€

Rubber Bellows 190mm for Morse and Steering cable protection (Finnord)

Rubber Bellows 190mm for Morse and Steering cable protection (Finnord)Rubber bellows, length mm. 190, Ø ext. mm. 38, Ø int. mm. 24 - 10 ..

(10)

9.24€ 8.52€ Ex Tax: 8.52€

Ultraflex L13

Ultraflex L13Nipple to be used on cables: C4 – B14 Clamp cable end for B14 engine shut-off cable...

(6)

8.04€ 7.42€ Ex Tax: 7.42€

Ultraflex L12

Ultraflex L12Pivot to be used on cables : C2 Mach Zero – C8 –33C Cable end for C2 / MACHZero / C8 / C33 engine control cables...

(11)

8.04€ 7.42€ Ex Tax: 7.42€

white cable steering bellow 103mm (Nuova Rade)

white cable steering bellow 103mm (Nuova Rade)Cable steering bellow Slot without fasteners. ..

(14)

7.75€ 7.16€ Ex Tax: 7.16€

Grey Rubber Cable Steering and Morse Bellow 103mm (Nuova Rade)

Grey Rubber Cable Steering and Morse Bellow 103mm (Nuova Rade)Cable steering bellow Slot without fasteners. ..

(15)

7.75€ 7.16€ Ex Tax: 7.16€

Black steering and Morse bellow 103mm (Nuova Rade)

Black steering and Morse bellow 103mm (Nuova Rade)Cable steering bellow Slot without fasteners. ..

(11)

7.75€ 7.16€ Ex Tax: 7.16€

Stainless steel Morse and Steering cable fairlead 90 Mm (Mavi.mare)

Stainless steel Morse and Steering cable fairlead 90 Mm (Mavi.mare)Wire fairlead plastic and stainless steel complete neoprene sealing ring. Allows the passage or the output of steering cables, electrical cables and various tubes. ..

(9)

7.11€ 6.56€ Ex Tax: 6.56€

Ultraflex eye terminal ø mm.6 (Ultraflex)

Ultraflex eye terminal ø mm.6 (Ultraflex)Lever control accessories ..

(12)

7.03€ 6.49€ Ex Tax: 6.49€

Ultraflex L14

Ultraflex L14Cable clamp to be used on cables: C2-Mach Zero-C7-C8-33C. Clamp clevis for engine control cables...

(4)

6.82€ 6.29€ Ex Tax: 6.29€

Black fastening bush (Ceredi Giovanni)

Black fastening bush (Ceredi Giovanni)Fastening bush with no. 3 screws for art. 2727555. ..

(5)

6.72€ 6.21€ Ex Tax: 6.21€