Waste Water Gauges and level Senders

Waste Water Gauges and level Senders

Waste Water Gauges and level Senders

Show:
Sort By:

Black waters Level Sender VDO 600 - 1200 mm, 10-180 Ohm (Cec)

Black waters Level Sender VDO 600 - 1200 mm, 10-180 Ohm (Cec)Capacitive black water sensor with adjustable alarm contact..

(14)

514.29€ 493.71€ Ex Tax: 493.71€

Wastewater Level Sender VDO 200-600Mm

Wastewater Level Sender VDO 200-600MmWater level sender. The waste water model is complete with alarm contact. For 4 - 20 mA water level instruments...

(11)

396.72€ 380.85€ Ex Tax: 380.85€

Adjustable Black waters Level Sender VDO 80 - 600 mm, 10-180 Ohm (Cec)

Adjustable Black waters Level Sender VDO 80 - 600 mm, 10-180 Ohm (Cec)Capacitive black water sensor with adjustable alarm contact. Compatible with indicators articles 5400156B and 5420036..

(10)

382.81€ 367.49€ Ex Tax: 367.49€

Electrical 95cm Tank Level Senders for Waste Water & Fresh Water

Electrical 95cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm. When Height is between 30cm and 60cm : 2cm. When height is greater than 60cm : 3cm. Specifications Amps 20mA Maximum Current ..

(3)

175.87€ Ex Tax: 175.87€

Electrical 85cm Tank Level Senders for Waste Water & Fresh Water

Electrical 85cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm. When Height is between 30cm and 60cm : 2cm. When height is greater than 60cm : 3cm. Specifications Amps 20mA Maximum Current ..

(14)

167.09€ Ex Tax: 167.09€

Electrical 75cm Tank Level Senders for Waste Water & Fresh Water

Electrical 75cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm. When Height is between 30cm and 60cm : 2cm. When height is greater than 60cm : 3cm. Specifications Amps 20mA Maximum Current ..

(10)

158.53€ Ex Tax: 158.53€

Electrical 65cm Tank Level Senders for Waste Water & Fresh Water

Electrical 65cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm. When Height is between 30cm and 60cm : 2cm. When height is greater than 60cm : 3cm. Specifications Amps 20mA Maximum Current ..

(9)

149.76€ Ex Tax: 149.76€

Electrical 50cm Tank Level Senders for Waste Water & Fresh Water

Electrical 50cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. Resistance: 3-180 ohms (European) or 240-33 ohms (American). These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm When Height is between 30cm and 60cm : 2cm When height is greater than 60cm : 3cm Specifications Amps ..

(9)

136.58€ Ex Tax: 136.58€

Electrical 35cm Tank Level Senders for Waste Water & Fresh Water

Electrical 35cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm. When Height is between 30cm and 60cm : 2cm. When height is greater than 60cm : 3cm. Specifications Amps 20mA Maximum Current ..

(3)

126.92€ Ex Tax: 126.92€

Electrical 33cm Tank Level Senders for Waste Water & Fresh Water

Electrical 33cm Tank Level Senders for Waste Water & Fresh Water This level sender has the ability to measure the water level contained within a tank, whether it be a holding tank or fresh water tank. An alarm can be programmed to sound when the level in this tank exceeds 80% or drops below 20%. The sender is rated IP65 and does not need to be calibrated. These water senders are accurate to 2% and are available in many sizes between 10cm and 100cm, as listed below. These water level sensors are suitable for use with European or American resistance gauges, resistance is changed by removing an external jumper mounted on the top of the sender. When Height is less than 30cm : 1cm. When Height is between 30cm and 60cm : 2cm. When height is greater than 60cm : 3cm. Specifications Amps 20mA Maximum Current ..

(6)

125.17€ Ex Tax: 125.17€

KUS Dip Level Sender 450mm (Euro Resistance)

KUS Dip Level Sender 450mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in waste water tanks (black or grey water) and fresh water tanks. The dip level sender features a stainless steel 316 body, an NBR rubber gasket and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 450mm, Wire: 460mm Operating Temperature ..

(9)

103.95€ Ex Tax: 103.95€

KUS Dip Level Sender 350mm (Euro Resistance)

KUS Dip Level Sender 350mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in waste water tanks (black or grey water) and fresh water tanks. The dip level sender features a stainless steel 316 body, an NBR rubber gasket and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 350mm, Wire: 460mm Operating Temperature ..

(7)

95.35€ Ex Tax: 95.35€

KUS Dip Level Sender 300mm (Euro Resistance)

KUS Dip Level Sender 300mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in waste water tanks (black or grey water) and fresh water tanks. The dip level sender features a stainless steel 316 body, an NBR rubber gasket and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 300mm, Wire: 460mm Operating Temperature ..

(12)

91.21€ Ex Tax: 91.21€

KUS Dip Level Sender 275mm (Euro Resistance)

KUS Dip Level Sender 275mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in waste water tanks (black or grey water) and fresh water tanks. The dip level sender features a stainless steel 316 body, an NBR rubber gasket and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 275mm, Wire: 460mm Operating Temperature ..

(11)

87.04€ Ex Tax: 87.04€

KUS Dip Level Sender 250mm (Euro Resistance)

KUS Dip Level Sender 250mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in waste water tanks (black or grey water) and fresh water tanks. The dip level sender features a stainless steel 316 body, an NBR rubber gasket and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 250mm, Wire: 460mm Operating Temperature ..

(13)

82.87€ Ex Tax: 82.87€

Waste Water Level gauge VDO white (20 mA) 52mm

Waste Water Level gauge VDO white (20 mA) 52mmVDO View-Line 8-32V gauges complete with connection cables. Anti-fog double lens with IP67 frontal protection. Integrated LED light...

(9)

77.62€ 74.51€ Ex Tax: 74.51€

Waste Water Level Gauge Vdo (20 mA) Black 52mm

Waste Water Level Gauge Vdo (20 mA) Black 52mmView-Line 12V VDO gauges complete with connection cables, bezel and instructions. Anti-fog double lens with IP67 protection rating. Integrated LED light. Black or White dials available. Optional Chromed bezel. For 24V systems, optional resistor (2300303) is to be used...

(3)

77.62€ 74.51€ Ex Tax: 74.51€

waste water level indicator (Matromarine)

waste water level indicator (Matromarine)Gauge waste tank level with led: green = on, yellow = half, red = full.Dims. mm. 62x60. Equipped with 3 sensors sending unit with full uproad. Flange Ø mm. 80. Fixing screw, 5 holes...

(4)

67.22€ 64.53€ Ex Tax: 64.53€

Level indicator for Tanks MDPE (Sic Divisione Elettronica)

Level indicator for Tanks MDPE (Sic Divisione Elettronica)Lcd waste water level indicator 12V 4-20MA..

(12)

63.67€ 61.12€ Ex Tax: 61.12€

KUS Waste Water Level Gauge with Black Stainless Bezel (Euro)

KUS Waste Water Level Gauge with Black Stainless Bezel (Euro) The KUS waste water level gauge features a black stainless steel 316 bezel, black dial, white pointer and graphics displaying empty to full, with red or yellow back lighting and a convex double layer reinforced anti-fogging glass lens. The KUS waste water tank level gauge monitors the amount of waste water present in the holding tank and measures from empty to full using European resistance. The dial displays markers to indicate every quarter of a tank. KUS Sea V series gauges have an IP67 protection rating for the entire gauge and can work up to 1 metre underwater. They also feature an easy installation multi-plug socket connection design. Specifications Voltage 12V & 24V DC Brand KUS ..

(4)

45.26€ Ex Tax: 45.26€

Sewage Level Gauge ECMS 12/24V Black 52mm

Sewage Level Gauge ECMS 12/24V Black 52mmEcms 12/24V All Black gauges complete with cables and Molex connection. 316 Stainless Stell black bezel. Watertight IP67 protected anti-fog curved lens. Customizable multi-color LED backlighted dial. The standard setup 0-190 Ohm of the Level Gauges 2361006 - 2361016 - 2361026 can be easily changed to 240-33 Ohm with back button. The ammeter 2361079 is complete with shunt...

(6)

24.45€ 23.47€ Ex Tax: 23.47€

Ecms White Chrome 12/24V Sewage Level Gauge 52mm

Ecms White Chrome 12/24V Sewage Level Gauge 52mmEcms White Chrome 12/24V gauges complete with cables and Molex connection. 316 Stainless Stell chrome bezel. Watertight IP67 protected anti-fog curved lens. Customizable multi-color LED backlighted dial. The standard setup 0-190 Ohm of the Level Gauges 2361001 - 2361011 - 2361021 can be easily changed to 240-33 Ohm with back button. The ammeter 2361075 is complete with shunt...

(10)

24.45€ 23.47€ Ex Tax: 23.47€

Ecms Black Chrome 12/24V Sewage Level Gauge E-1/2-F

Ecms Black Chrome 12/24V Sewage Level Gauge E-1/2-FEcms Black Chrome 12/24V gauges complete with cables and Molex connection. 316 Stainless Stell chrome bezel. Watertight IP67 protected anti-fog curved lens. Customizable multi-color LED backlighted dial. The standard setup 0-190 Ohm of the Level Gauges 2361004 - 2361014 - 2361024 can be easily changed to 240-33 Ohm with back button. The ammeter 2361078 is complete with shunt...

(14)

24.45€ 23.47€ Ex Tax: 23.47€