Water Level Gauges and Senders

Water Level Gauges and Senders

Water Level Gauges and Senders

Show:
Sort By:

Water Gauge for stainless steel tanks 1200-1500 mm

Water Gauge for stainless steel tanks 1200-1500 mmWater capacitive sensor for stainless steel tanks ..

(8)

593.38€ 587.45€ Ex Tax: 587.45€

Water level sender VDO 600 -1200MM ( vdo N02-240-404)

Water level sender VDO 600 -1200MM ( vdo N02-240-404)Water level senders VDO For 4 - 20 mA water level instruments. Water capacitive sensor for stainless steel tanks..

(4)

489.04€ 484.15€ Ex Tax: 484.15€

Vetus Ultrasonic Level Sender / Sensor

Vetus Ultrasonic Level Sender / Sensor The Vetus Ultrasonic level sender, Vetus SENSORA provides contactless measuring of the tank contents. The Vetus SENSORA is suitable for use with petrol, diesel, drinking water, grey waste water and black waste water. The Vetus SENSORA level sensor can be easily calibrated with the aid of an LED and calibration wire: no other equipment is required. Vetus ultrasonic level sensor may be installed in most non-metallic tanks with a maximum tank depth of 120cm. When fitting the Vetus SENSORA to a Vetus fuel tank filler kit FTKIT, then adaptor V-SENSORR must also be ordered. The sensor may be connected to all standard Vetus analogue level indicators and also to the Vetus waste water control panel (WWCP). Specifications Amps 35mA Current consumption Op..

(4)

348.48€ 345.00€ Ex Tax: 345.00€

Vetus SENSOR780 Water / Fuel Tank Level Sensor (780mm)

Vetus SENSOR780 Water / Fuel Tank Level Sensor (780mm) Vetus tank level sensor is suitable for use with diesel tanks, petrol tanks and water tanks. These senders are compatible with 12 volt and 24 volt Vetus fuel and water level gauges or any other gauge working on the scale of 300 Ohms displaying empty and 30 Ohms displaying full. The Vetus universal tank float sensor is highly accurate. The sender contains the maximum number of contacts to display a different level in fuel for every 25mm difference. These contacts are fluid tight to ensure reliable and precise operation. The Vetus SENSOR780 is 780mm in length, making it suitable for tanks of that size. Specifications Length 780mm Voltage 12 & 24V DC Brand ..

(5)

267.30€ 264.63€ Ex Tax: 264.63€

Vetus SENSOR680 Water / Fuel Tank Level Sensor (680mm)

Vetus SENSOR680 Water / Fuel Tank Level Sensor (680mm) Vetus tank level sensor is suitable for use with diesel tanks, petrol tanks and water tanks. These senders are compatible with 12 volt and 24 volt Vetus fuel and water level gauges or any other gauge working on the scale of 300 Ohms displaying empty and 30 Ohms displaying full. The Vetus universal tank float sensor is highly accurate. The sender contains the maximum number of contacts to display a different level in fuel for every 25mm difference. These contacts are fluid tight to ensure reliable and precise operation. The Vetus SENSOR680 is 680mm in length, making it suitable for tanks of that size. Specifications Length 680mm Voltage 12 & 24V DC Brand ..

(8)

247.50€ 245.03€ Ex Tax: 245.03€

KUS Fuel and Water Dip Level Sender 1200mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 1200mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 1200mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. - Resistance Output: 0 to 190 ohms - Power Rating: 125mW - Resolution range: 10mm to 40mm - KUS Part Number: JS60077 / S5-E1200 A..

(9)

226.80€ 224.53€ Ex Tax: 224.53€

Vetus SENSOR580 Water / Fuel Tank Level Sensor (580mm)

Vetus SENSOR580 Water / Fuel Tank Level Sensor (580mm) Vetus tank level sensor is suitable for use with diesel tanks, petrol tanks and water tanks. These senders are compatible with 12 volt and 24 volt Vetus fuel and water level gauges or any other gauge working on the scale of 300 Ohms displaying empty and 30 Ohms displaying full. The Vetus universal tank float sensor is highly accurate. The sender contains the maximum number of contacts to display a different level in fuel for every 25mm difference. These contacts are fluid tight to ensure reliable and precise operation. The Vetus SENSOR580 is 580mm in length, making it suitable for tanks of that size. Specifications Length 580mm Voltage 12 & 24V DC Brand ..

(8)

225.72€ 223.46€ Ex Tax: 223.46€

Water Lever Sender VDO 80 -600mm N02-240-402

Water Lever Sender VDO 80 -600mm N02-240-402Water level sender. The waste water model is complete with alarm contact. For 4 - 20 mA water level instruments. ..

(4)

198.84€ 196.85€ Ex Tax: 196.85€

Vetus SENSOR480 Water / Fuel Tank Level Sensor (480mm)

Vetus SENSOR480 Water / Fuel Tank Level Sensor (480mm) Vetus tank level sensor is suitable for use with diesel tanks, petrol tanks and water tanks. These senders are compatible with 12 volt and 24 volt Vetus fuel and water level gauges or any other gauge working on the scale of 300 Ohms displaying empty and 30 Ohms displaying full. The Vetus universal tank float sensor is highly accurate. The sender contains the maximum number of contacts to display a different level in fuel for every 25mm difference. These contacts are fluid tight to ensure reliable and precise operation. The Vetus SENSOR480 is 480mm in length, making it suitable for tanks of that size. Specifications Length 480mm Voltage 12 & 24V DC Brand ..

(5)

190.87€ 188.96€ Ex Tax: 188.96€

Water Gauge for stainless steel tanks 80 - 600 mm

Water Gauge for stainless steel tanks 80 - 600 mmWater capacitive sensor for stainless steel tanks Compatible with indicators Articles 5420153/154 ..

(14)

187.32€ 185.45€ Ex Tax: 185.45€

KUS Fuel and Water Dip Level Sender 900mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 900mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 900mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 900mm, Wire: 460mm Operating Temperature ..

(8)

172.47€ 170.75€ Ex Tax: 170.75€

KUS Fuel and Water Dip Level Sender 850mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 850mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 850mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 850mm, Wire: 460mm Operating Temperature ..

(15)

164.55€ 162.91€ Ex Tax: 162.91€

KUS Fuel and Water Dip Level Sender 750mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 750mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 750mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 750mm, Wire: 460mm Operating Temperature ..

(5)

155.10€ 153.55€ Ex Tax: 153.55€

Stainless Steel Tubular Sender VDO 1000mm

Stainless Steel Tubular Sender VDO 1000mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(13)

144.31€ 142.87€ Ex Tax: 142.87€

KUS Fuel and Water Dip Level Sender 700mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 700mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 700mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 700mm, Wire: 460mm Operating Temperature ..

(10)

143.67€ 142.23€ Ex Tax: 142.23€

Vetus SENSOR380 Water / Fuel Tank Level Sensor (380mm)

Vetus SENSOR380 Water / Fuel Tank Level Sensor (380mm) Vetus tank level sensor is suitable for use with diesel tanks, petrol tanks and water tanks. These senders are compatible with 12 volt and 24 volt Vetus fuel and water level gauges or any other gauge working on the scale of 300 Ohms displaying empty and 30 Ohms displaying full. The Vetus universal tank float sensor is highly accurate. The sender contains the maximum number of contacts to display a different level in fuel for every 25mm difference. These contacts are fluid tight to ensure reliable and precise operation. The Vetus SENSOR380 is 380mm in length, making it suitable for tanks of that size. Specifications Length 380mm Voltage 12V & 24V DC Brand ..

(14)

135.75€ 134.39€ Ex Tax: 134.39€

KUS Fuel and Water Dip Level Sender 650mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 650mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 650mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 650mm, Wire: 460mm Operating Temperature ..

(9)

135.75€ 134.39€ Ex Tax: 134.39€

Stainless Steel Tubular Sender VDO 900mm

Stainless Steel Tubular Sender VDO 900mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(3)

132.34€ 131.02€ Ex Tax: 131.02€

KUS Fuel and Water Dip Level Sender 600mm (US Resistance)

KUS Fuel and Water Dip Level Sender 600mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 600mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 600mm, Wire: 460mm Operating Temperature ..

(5)

127.83€ 126.55€ Ex Tax: 126.55€

KUS Fuel and Water Dip Level Sender 600mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 600mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 600mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 600mm, Wire: 460mm Operating Temperature ..

(13)

127.83€ 126.55€ Ex Tax: 126.55€

KUS Fuel and Water Dip Level Sender 550mm (US Resistance)

KUS Fuel and Water Dip Level Sender 550mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 550mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 550mm, Wire: 460mm Operating Temperature ..

(14)

121.44€ 120.23€ Ex Tax: 120.23€

KUS Fuel and Water Dip Level Sender 550mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 550mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 550mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 550mm, Wire: 460mm Operating Temperature ..

(15)

121.44€ 120.23€ Ex Tax: 120.23€

Stainless Steel Tubular Sender VDO 800mm

Stainless Steel Tubular Sender VDO 800mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(13)

119.04€ 117.85€ Ex Tax: 117.85€

KUS Fuel and Water Dip Level Sender 500mm (US Resistance)

KUS Fuel and Water Dip Level Sender 500mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 500mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 500mm, Wire: 460mm Operating Temperature ..

(10)

114.84€ 113.69€ Ex Tax: 113.69€

KUS Fuel and Water Dip Level Sender 500mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 500mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 500mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 500mm, Wire: 460mm Operating Temperature ..

(15)

114.84€ 113.69€ Ex Tax: 113.69€

Vetus WATERB Water Level Gauge (52mm Cut Out / Black)

Vetus WATERB Water Level Gauge (52mm Cut Out / Black) Vetus water level gauges are individually tested and calibrated to ensure a high degree of accuracy. They are reliable and involve low maintenance to keep the gauges functioning correctly. This Vetus water gauge has a translucent dial which is lighted from below, and features double glazed lenses to minimise the possibility of condensation forming on the inside of the gauge. Vetus WATERB is supplied with two bezels as standard, one black and one chrome finished. The dial display shows a full tank, half tank and empty tank, as well as markers for 1/4 and 3/4. Specifications Voltage 12V & 24V Brand Vetus Gauge Pointer Red ..

(12)

112.36€ 111.23€ Ex Tax: 111.23€

Vetus SENSOR280 Water / Fuel Tank Level Sensor (280mm)

Vetus SENSOR280 Water / Fuel Tank Level Sensor (280mm) The Vetus tank level sensor is suitable for use with diesel tanks, petrol tanks and water tanks. These senders are compatible with 12 volt and 24 volt Vetus fuel and water level gauges or any other gauge working on the scale of 300 Ohms displaying empty and 30 Ohms displaying full. This Vetus universal tank float sensor is highly accurate. The sender contains the maximum number of contacts to display a different level in fuel for every 25mm difference. These contacts are fluid tight to ensure reliable and precise operation. The Vetus SENSOR280 is 280mm in length, making it suitable for tanks of that size. Specifications Length 280mm Voltage 12 & 24V DC Brand ..

(13)

112.36€ 111.23€ Ex Tax: 111.23€

KUS Fuel and Water Dip Level Sender 450mm (US Resistance)

KUS Fuel and Water Dip Level Sender 450mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 450mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 450mm, Wire: 460mm Operating Temperature ..

(9)

110.22€ 109.12€ Ex Tax: 109.12€

KUS Fuel and Water Dip Level Sender 450mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 450mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 450mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 450mm, Wire: 460mm Operating Temperature ..

(5)

110.22€ 109.12€ Ex Tax: 109.12€

Stainless Steel Tubular Sender VDO 700mm

Stainless Steel Tubular Sender VDO 700mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(3)

107.07€ 106.00€ Ex Tax: 106.00€

KUS Fuel and Water Dip Level Sender 400mm (US Resistance)

KUS Fuel and Water Dip Level Sender 400mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 400mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 400mm, Wire: 460mm Operating Temperature ..

(10)

105.39€ 104.33€ Ex Tax: 104.33€

KUS Fuel and Water Dip Level Sender 400mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 400mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 400mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 400mm, Wire: 460mm Operating Temperature ..

(3)

105.39€ 104.33€ Ex Tax: 104.33€

KUS Fuel and Water Dip Level Sender 350mm (US Resistance)

KUS Fuel and Water Dip Level Sender 350mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 350mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 350mm, Wire: 460mm Operating Temperature ..

(3)

98.79€ 97.80€ Ex Tax: 97.80€

KUS Fuel and Water Dip Level Sender 350mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 350mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 350mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 350mm, Wire: 460mm Operating Temperature ..

(7)

98.79€ 97.80€ Ex Tax: 97.80€

Level Sender Easy Level Can Marine 12-24v

Level Sender Easy Level Can Marine 12-24vUniversal for black / gray and white water with 3 reading points (empty-half-full) adaptable to the various heights of the tanks up to a maximum of 60 cm., simply by cutting the wire at the desired height. The absence of moving mechanical parts makes it particularly suitable for the heaviest uses (black water). Standard 10/180 OHM configured output. Equipped with switching button, visible with LED, for 240/33 OHM output or for 3 LED reading. Level sensor for heavy use of waste water. It adapts to any tank up to a maximum height of 60 cm by adjusting the wires length. The signal is transmitted at three points (empty-half-full). Universal 12/24V power supply, complete with 10-180 or 240-33 Ohm impedance switching key. ..

(11)

104.79€ 94.31€ Ex Tax: 94.31€

Stainless Steel Tubular Sender VDO 600mm

Stainless Steel Tubular Sender VDO 600mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(13)

95.10€ 94.15€ Ex Tax: 94.15€

Stainless Steel Tubular Sender VDO 550mm

Stainless Steel Tubular Sender VDO 550mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(15)

89.78€ 88.88€ Ex Tax: 88.88€

KUS Fuel and Water Dip Level Sender 300mm (US Resistance)

KUS Fuel and Water Dip Level Sender 300mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 300mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 300mm, Wire: 460mm Operating Temperature ..

(15)

89.05€ 88.16€ Ex Tax: 88.16€

KUS Fuel and Water Dip Level Sender 300mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 300mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 300mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 300mm, Wire: 460mm Operating Temperature ..

(11)

89.05€ 88.16€ Ex Tax: 88.16€

KUS Fuel and Water Dip Level Sender 275mm (US Resistance)

KUS Fuel and Water Dip Level Sender 275mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 275mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 275mm, Wire: 460mm Operating Temperature ..

(13)

87.49€ 86.61€ Ex Tax: 86.61€

KUS Fuel and Water Dip Level Sender 275mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 275mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 275mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 275mm, Wire: 460mm Operating Temperature ..

(3)

87.49€ 86.61€ Ex Tax: 86.61€

Stainless Steel Tubular Sender VDO 500mm

Stainless Steel Tubular Sender VDO 500mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(9)

85.79€ 84.93€ Ex Tax: 84.93€

KUS Fuel and Water Dip Level Sender 250mm (US Resistance)

KUS Fuel and Water Dip Level Sender 250mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 250mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 250mm, Wire: 460mm Operating Temperature ..

(4)

83.82€ 82.98€ Ex Tax: 82.98€

KUS Fuel and Water Dip Level Sender 250mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 250mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 250mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 250mm, Wire: 460mm Operating Temperature ..

(12)

83.82€ 82.98€ Ex Tax: 82.98€

Faria Beede Water Tank Level Gauge in Euro Black (Euro Resistance)

Faria Beede Water Tank Level Gauge in Euro Black (Euro Resistance) The Faria Beede Euro Black style water tank level gauge features a black aluminium bezel, black dial, white pointer and graphics displaying empty to full, with perimeter back lighting and a flat glass lens. The Faria Beede water tank level gauge monitors the amount of water remaining in the water tank and measures from empty to full. The dial displays markers to indicate every quarter of a tank. Specifications Supplied With Backing Clamp Voltage 12V DC systems, 24V requires adaptor FAR90315 Brand Faria Beede Gauge Style Euro Black ..

(8)

82.95€ 82.12€ Ex Tax: 82.12€

Faria Beede Water Tank Level Gauge in Euro Black Style (US Resistance)

Faria Beede Water Tank Level Gauge in Euro Black Style (US Resistance) The Faria Beede Euro Black style water tank level gauge features a black aluminium bezel, black dial, white pointer and graphics displaying empty to full, with perimeter back lighting and a flat glass lens. The Faria Beede water tank level gauge monitors the amount of water remaining in the water tank and measures from empty to full. The dial displays markers to indicate every quarter of a tank. Specifications Supplied With Backing Clamp Voltage 12V DC systems, 24V requires adaptor FAR90314 Brand Faria Beede Gauge Style Euro Black ..

(3)

82.71€ 81.88€ Ex Tax: 81.88€

KUS Fuel and Water Dip Level Sender 225mm (US Resistance)

KUS Fuel and Water Dip Level Sender 225mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 225mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 225mm, Wire: 460mm Operating Temperature ..

(7)

80.68€ 79.87€ Ex Tax: 79.87€

KUS Fuel and Water Dip Level Sender 225mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 225mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 225mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 225mm, Wire: 460mm Operating Temperature ..

(11)

80.68€ 79.87€ Ex Tax: 79.87€

Stainless Steel Tubular Sender VDO 450mm

Stainless Steel Tubular Sender VDO 450mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(8)

80.14€ 79.33€ Ex Tax: 79.33€

KUS Fuel and Water Dip Level Sender 200mm (US Resistance)

KUS Fuel and Water Dip Level Sender 200mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 200mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 200mm, Wire: 460mm Operating Temperature ..

(10)

79.33€ 78.54€ Ex Tax: 78.54€

KUS Fuel and Water Dip Level Sender 200mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 200mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 200mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 200mm, Wire: 460mm Operating Temperature ..

(5)

79.33€ 78.54€ Ex Tax: 78.54€

KUS Water Level Gauge with Stainless Bezel (White / Euro Resistance)

KUS Water Level Gauge with Stainless Bezel (White / Euro Resistance) The KUS water level gauge features a stainless steel 316 bezel, white dial, red pointer and black graphics displaying empty to full, with red or yellow back lighting and a convex double layer reinforced anti-fogging glass lens. The KUS water tank level gauge monitors the amount of water remaining in the water tank and measures from empty to full using European resistance. The dial displays markers to indicate every quarter of a tank. KUS Sea V series gauges have an IP67 protection rating for the entire gauge and can work up to 1 metre underwater. They also feature an easy installation multi-plug socket connection design. Specifications Voltage 12V & 24V DC Brand KUS ..

(5)

77.58€ 76.80€ Ex Tax: 76.80€

KUS Water Level Gauge with Stainless Bezel (Black / Euro Resistance)

KUS Water Level Gauge with Stainless Bezel (Black / Euro Resistance) The KUS water level gauge features a stainless steel 316 bezel, black dial, white pointer and graphics displaying empty to full, with red or yellow back lighting and a convex double layer reinforced anti-fogging glass lens. The KUS water tank level gauge monitors the amount of water remaining in the water tank and measures from empty to full using European resistance. The dial displays markers to indicate every quarter of a tank. KUS Sea V series gauges have an IP67 protection rating for the entire gauge and can work up to 1 metre underwater. They also feature an easy installation multi-plug socket connection design. Specifications Voltage 12V & 24V DC Brand KUS ..

(11)

77.58€ 76.80€ Ex Tax: 76.80€

KUS Water Level Gauge with Black Stainless Bezel (US Resistance)

KUS Water Level Gauge with Black Stainless Bezel (US Resistance) The KUS water level gauge features a black stainless steel 316 bezel, black dial, white pointer and graphics displaying empty to full, with red or yellow back lighting and a convex double layer reinforced anti-fogging glass lens. The KUS water tank level gauge monitors the amount of water remaining in the water tank and measures from empty to full using American resistance. The dial displays markers to indicate every quarter of a tank. KUS Sea V series gauges have an IP67 protection rating for the entire gauge and can work up to 1 metre underwater. They also feature an easy installation multi-plug socket connection design. Specifications Voltage 12V & 24V DC Brand KUS ..

(5)

77.58€ 76.80€ Ex Tax: 76.80€

KUS Water Level Gauge with Black Stainless Bezel (Euro Resistance)

KUS Water Level Gauge with Black Stainless Bezel (Euro Resistance) The KUS water level gauge features a black stainless steel 316 bezel, black dial, white pointer and graphics displaying empty to full, with red or yellow back lighting and a convex double layer reinforced anti-fogging glass lens. The KUS water tank level gauge monitors the amount of water remaining in the water tank and measures from empty to full using European resistance. The dial displays markers to indicate every quarter of a tank. KUS Sea V series gauges have an IP67 protection rating for the entire gauge and can work up to 1 metre underwater. They also feature an easy installation multi-plug socket connection design. Specifications Voltage 12V & 24V DC Brand KUS ..

(13)

77.58€ 76.80€ Ex Tax: 76.80€

KUS Fuel and Water Dip Level Sender 175mm (US Resistance)

KUS Fuel and Water Dip Level Sender 175mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 175mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 175mm, Wire: 460mm Operat..

(13)

77.27€ 76.50€ Ex Tax: 76.50€

KUS Fuel and Water Dip Level Sender 175mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 175mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 175mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one fuel level gauge, for dual gauge operations order a dual station fuel level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 175mm, Wire: 460mm Operat..

(9)

77.27€ 76.50€ Ex Tax: 76.50€

Stainless Steel Tubular Sender VDO 400mm

Stainless Steel Tubular Sender VDO 400mmStainless Steel waterproof tubular sensor for the monitoring of any type of liquid levels, from water to fuel. 5 Holes VDO flange, with wheelbase holes diameter 54 mm. Universal 12/24V power supply. Compatible with any instrument with impedence from 0-180 Ohm. ..

(9)

76.15€ 75.38€ Ex Tax: 75.38€

KUS Fuel and Water Dip Level Sender 150mm (US Resistance)

KUS Fuel and Water Dip Level Sender 150mm (US Resistance) The KUS single station level sender is American resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 150mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 150mm, Wire: 460mm Operating Temperatur..

(13)

75.66€ 74.91€ Ex Tax: 74.91€

KUS Fuel and Water Dip Level Sender 150mm (Euro Resistance)

KUS Fuel and Water Dip Level Sender 150mm (Euro Resistance) The KUS single station level sender is European resistance and suitable for use in diesel or petrol (gasoline) fuel tanks and water tanks. The 150mm dip level sender features a stainless steel 316 body, a 2mm thick NBR rubber gasket, 5 x M5 Screws, and a PVC covered wire. Sender uses magnetic field to control the on-off switch and features a long service life and vibration protection. The sender has a protection rating of IP67. Single station level sender is suitable for operating one gauge, for dual gauge operations order a dual station level sender. Specifications Amps Current for Alarm Switch: 500mA Length Sender: 150mm, Wire: 460mm Operating Temperature ..

(4)

75.66€ 74.91€ Ex Tax: 74.91€